제품 상세 정보

BB BW LP filter (min) (MHz) 0.615 BB BW LP filter (max) (MHz) 1.92 Supply voltage (typ) (V) 5 IIP3 (typ) (dBm) 21 IIP2 (typ) (dBm) 60 Frequency range (typ) 1.7 to 2.0 GHz Rating Catalog Operating temperature range (°C) -40 to 85
BB BW LP filter (min) (MHz) 0.615 BB BW LP filter (max) (MHz) 1.92 Supply voltage (typ) (V) 5 IIP3 (typ) (dBm) 21 IIP2 (typ) (dBm) 60 Frequency range (typ) 1.7 to 2.0 GHz Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGZ) 48 49 mm² 7 x 7
  • Frequency Range: 1.7-2.0 GHz
  • Integrated Baseband Programmable Gain Amplifier
  • On Chip Programmable Baseband Filter
  • High Cascaded IP3: 21 dBm at 1.9 GHz
  • High IP2: 60 dBm at 1.9 GHz
  • Hardware and Software Power Down
  • 3-Wire Serial Programmable Interface
  • Single Supply: 4.5 V to 5.5 V Operation
  • APPLICATIONS
    • Wireless Infrastructure
      • WCDMA
      • CDMA
    • Wireless Local Loop
    • High Linearity Direct-Down Conversion Receiver

All trademarks are the property of their respective owners.

  • Frequency Range: 1.7-2.0 GHz
  • Integrated Baseband Programmable Gain Amplifier
  • On Chip Programmable Baseband Filter
  • High Cascaded IP3: 21 dBm at 1.9 GHz
  • High IP2: 60 dBm at 1.9 GHz
  • Hardware and Software Power Down
  • 3-Wire Serial Programmable Interface
  • Single Supply: 4.5 V to 5.5 V Operation
  • APPLICATIONS
    • Wireless Infrastructure
      • WCDMA
      • CDMA
    • Wireless Local Loop
    • High Linearity Direct-Down Conversion Receiver

All trademarks are the property of their respective owners.

The TRF3710 is a highly linear and integrated direct-conversion quadrature demodulator optimized for Third-Generation (3G) wireless infrastructure. The TRF3710 integrates balanced I and Q mixers, LO buffers and phase splitters to convert an RF signal directly to I and Q baseband. The on-chip programmable-gain amplifiers allow adjustment of the output signal level without the need for external variable-gain (attenuator) devices. The TRF3710 integrates programmable baseband low-pass filters that attenuate nearby interference, eliminating the need for an external baseband filter.

Housed in a 7X7mm QFN package, the TRF3710 provides the smallest and most integrated receiver solution available for high performance equipment.

The TRF3710 is a highly linear and integrated direct-conversion quadrature demodulator optimized for Third-Generation (3G) wireless infrastructure. The TRF3710 integrates balanced I and Q mixers, LO buffers and phase splitters to convert an RF signal directly to I and Q baseband. The on-chip programmable-gain amplifiers allow adjustment of the output signal level without the need for external variable-gain (attenuator) devices. The TRF3710 integrates programmable baseband low-pass filters that attenuate nearby interference, eliminating the need for an external baseband filter.

Housed in a 7X7mm QFN package, the TRF3710 provides the smallest and most integrated receiver solution available for high performance equipment.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
9개 모두 보기
유형 직함 날짜
* Data sheet IQ Demodulator datasheet (Rev. A) 2008/02/18
Technical article Can a clock generator act as a jitter cleaner? PDF | HTML 2017/03/23
Technical article Don’t let bad reference signals destroy the phase noise in your PLL/synthesizer PDF | HTML 2017/01/10
Technical article A survival guide to scaling your PLL loop filter design PDF | HTML 2016/11/22
User guide TSW6011EVM Quick Start Guide (Rev. D) 2016/08/17
Technical article What to do when your PLL does not lock PDF | HTML 2016/07/12
Technical article Issues with jitter, phase noise, lock time or spurs? Check the loop-filter bandwid PDF | HTML 2016/06/06
Application note DC Offset Auto-Calibration of TRF371x 2009/11/05
EVM User's guide TRF3710EVM 2007/07/16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

회로도

TRF3710/TRF3711 Reference Designs

SLWR033.ZIP (1195 KB)
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGZ) 48 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상