TUSB216I

Name: TUSB216I
Brand: TI
SKU: TUSB216I
Price: 1.725 USD

활성

BC 1.2 컨트롤러가 장착된 USB 2.0 고속 신호 조절기

지금 주문

데이터 시트

document-pdfAcrobat TUSB216IUSB 2.0 High-Speed Signal Conditioner With BC 1.2 Controller datasheet (Rev. A) (영어) PDF | HTML

TUSB216I

활성

데이터 시트

지금 주문

제품 상세 정보

Type

Redriver

Function

USB 2.0

USB speed (Mbps)

480

Number of channels

Supply voltage (max) (V)

6.5

Supply voltage (min) (V)

2.3

Ron (typ) (mΩ)

3500

Input/output voltage (min) (V)

Input/output voltage (max) (V)

3.6

Configuration

USB 2.0 Single-channel

Features

USB 2.0 Redriver with 5 Meter Cable Redriving Strength Integrated BC 1.2 CDP battery charging controller RGY Package

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Supply current (max) (µA)

36000

ESD HBM (typ) (kV)

Bandwidth (MHz)

240

Type

Redriver

Function

USB 2.0

USB speed (Mbps)

480

Number of channels

Supply voltage (max) (V)

6.5

Supply voltage (min) (V)

2.3

Ron (typ) (mΩ)

3500

Input/output voltage (min) (V)

Input/output voltage (max) (V)

3.6

Configuration

USB 2.0 Single-channel

Features

USB 2.0 Redriver with 5 Meter Cable Redriving Strength Integrated BC 1.2 CDP battery charging controller RGY Package

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Supply current (max) (µA)

36000

ESD HBM (typ) (kV)

Bandwidth (MHz)

240

X2QFN (RWB)

2.56 mm² 1.6 x 1.6

Wide supply voltage range: 2.3 – 6.5 V
Ultra-low USB disconnect and shutdown power consumption
Provides USB 2.0 high-speed signal conditioning
Compatible with USB 2.0, OTG 2.0 and BC 1.2
Support for low-speed, full-speed, high-speed signaling
Integrated BC 1.2 CDP battery charging controller
Host or device agnostic
Supports up to 5-m cable length
- Four selectable signal boost (edge boost along with DC boost) settings through the external pull-down resistor values
- Three selectable RX sensitivity settings through the pull-up-or-down to compensate ISI jitter for high-loss applications
Supports up to 10-m cable length with two TUSB216I devices
Scalable solution – devices can be daisy chained for high loss applications
Pin compatible with TUSB211A, 212, 214, and 217A (3.3 V)

Wide supply voltage range: 2.3 – 6.5 V
Ultra-low USB disconnect and shutdown power consumption
Provides USB 2.0 high-speed signal conditioning
Compatible with USB 2.0, OTG 2.0 and BC 1.2
Support for low-speed, full-speed, high-speed signaling
Integrated BC 1.2 CDP battery charging controller
Host or device agnostic
Supports up to 5-m cable length
- Four selectable signal boost (edge boost along with DC boost) settings through the external pull-down resistor values
- Three selectable RX sensitivity settings through the pull-up-or-down to compensate ISI jitter for high-loss applications
Supports up to 10-m cable length with two TUSB216I devices
Scalable solution – devices can be daisy chained for high loss applications
Pin compatible with TUSB211A, 212, 214, and 217A (3.3 V)

The TUSB216I is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.

The TUSB216I leverages a patented design to speed-up transition edges of USB 2.0 high-speed signal with an edge booster and increases static levels with a DC boost function.

In addition, the TUSB216I includes a pre-equalization function to improve the receiver sensitivity and compensate the inter-symbol interference (ISI) jitter in application with longer cable length. USB low-speed and full-speed signal characteristics are unaffected by the TUSB216I.

The TUSB216I improves signal quality without altering packet timing or adding propagation delay or latency.

The TUSB216I helps a system to pass the USB 2.0 high-speed near end eye compliance with a cable as long as 5 meters.

The TUSB216I is compatible with the USB On-The-Go (OTG) and battery charging (BC 1.2) protocols. The Integrated BC 1.2 battery charging controller can be enabled through a control pin.

The TUSB216I is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.

The TUSB216I leverages a patented design to speed-up transition edges of USB 2.0 high-speed signal with an edge booster and increases static levels with a DC boost function.

The TUSB216I improves signal quality without altering packet timing or adding propagation delay or latency.

The TUSB216I helps a system to pass the USB 2.0 high-speed near end eye compliance with a cable as long as 5 meters.

The TUSB216I is compatible with the USB On-The-Go (OTG) and battery charging (BC 1.2) protocols. The Integrated BC 1.2 battery charging controller can be enabled through a control pin.

filter

기타 USB 리드라이버 및 멀티플렉서 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new

대안 비교

비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀

TUSB212

활성

DC 부스트를 갖춘 USB 2.0 고속 신호 조절기 Second generation with a shorter cable application and no CDP

TUSB214

활성

DC 부스트 및 통합 CDP를 갖춘 USB 2.0 고속 신호 조절기 Second generation with a shorter cable application

TUSB216

활성

DCP 및 CDP 컨트롤러를 갖춘 USB 2.0 고속 신호 조절기 Third generation commercial option

TUSB216-Q1

활성

배터리 충전 1.2 컨트롤러를 갖춘 USB 2.0 고속 신호 조절기 Third generation automotive option

TUSB217A

활성

DCP 및 CDP 컨트롤러를 갖춘 USB 2.0 고속 신호 조절기 Third generation commercial option

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

5개 모두 보기

	유형	직함		날짜
*	Data sheet	TUSB216IUSB 2.0 High-Speed Signal Conditioner With BC 1.2 Controller datasheet (Rev. A)	PDF \| HTML	2023/12/07
	Application note	TUSB21xx High-Speed Signal Quality Test Modes	PDF \| HTML	2022/08/08
	Application note	TUSB212 to TUSB216I Transition Guide	PDF \| HTML	2022/03/03
	User guide	TUSB211 to TUSB216I Transition Guide	PDF \| HTML	2021/05/25
	EVM User's guide	TUSB216IEVM User's Guide	PDF \| HTML	2021/03/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TUSB216IEVM — TUSB216I USB 2.0 고속 신호 조절기 평가 모듈

TUSB216I 평가 모듈은 다양한 애플리케이션에서 TUSB216I 장치의 신호 조절 기능을 평가하는 데 사용할 수 있습니다.

사용 설명서: PDF | HTML

TI.com에서 구매 불가

시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)

요청

시뮬레이션 툴

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

사용 설명서: PDF

View Options