전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

UCC25230

활성

12V~105V 입력, 0.2A 출력 스위칭 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM5168-Q1 활성 Fly-Buck™ 기능을 지원하는 오토모티브 6V~120V 와이드 VIN, 300mA DC-DC 컨버터 120-V synchronous, flybuck or standard buck configuration.

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck, Flybuck Type Flybuck Iout (max) (A) 0.2 Vin (min) (V) 12 Vin (max) (V) 75 Switching frequency (min) (kHz) 324 Switching frequency (max) (kHz) 380 Features Integrated Switch Control mode Feedforward, Voltage Vout (min) (V) 8.5 Vout (max) (V) 9.5 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 0.35
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck, Flybuck Type Flybuck Iout (max) (A) 0.2 Vin (min) (V) 12 Vin (max) (V) 75 Switching frequency (min) (kHz) 324 Switching frequency (max) (kHz) 380 Features Integrated Switch Control mode Feedforward, Voltage Vout (min) (V) 8.5 Vout (max) (V) 9.5 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 0.35
VSON (DRM) 8 16 mm² 4 x 4
  • Highly Integrated Converter Operating as a Buck, or Isolated Forward-Flyback, Flybuck™
  • Wide Operating Input Voltage Range from 12 V to 100 V, 105-V Surge.
  • Up to 0.2-A Output Current
  • 9-V Always Available VDD Output with up to 2-mA Current Capability
  • Thermally Enhanced 4-mm x 4-mm SON-8/S-PVSON-N8 (DRM) Package
  • Internally Set Fixed 380-kHz Switching Frequency
  • Internal 2-ms Duration Soft Start
  • Voltage Mode Control with Input Feed Forward Allows Optimal Output Filter Design
  • 2% Accuracy Internal 2.5-V Reference
  • VDD UVLO
  • Cycle-by-Cycle Current Limit with Frequency Fold Back for Initial Start up Under High Capacitive Loads
  • Input UVLO and OVLO with Input Good Signal
  • Integrated 110-V, High and Low-Side Switches
  • Highly Integrated Converter Operating as a Buck, or Isolated Forward-Flyback, Flybuck™
  • Wide Operating Input Voltage Range from 12 V to 100 V, 105-V Surge.
  • Up to 0.2-A Output Current
  • 9-V Always Available VDD Output with up to 2-mA Current Capability
  • Thermally Enhanced 4-mm x 4-mm SON-8/S-PVSON-N8 (DRM) Package
  • Internally Set Fixed 380-kHz Switching Frequency
  • Internal 2-ms Duration Soft Start
  • Voltage Mode Control with Input Feed Forward Allows Optimal Output Filter Design
  • 2% Accuracy Internal 2.5-V Reference
  • VDD UVLO
  • Cycle-by-Cycle Current Limit with Frequency Fold Back for Initial Start up Under High Capacitive Loads
  • Input UVLO and OVLO with Input Good Signal
  • Integrated 110-V, High and Low-Side Switches

The UCC25230 is a highly integrated PWM converter operating as an isolated forward flyback. It has high-side and low-side power switches integrated and the control circuit with all key converter functions included. The power stage requires only one- or multiple winding coupled inductor and output capacitors for the complete solution. Voltage-mode feed-forward control with external compensation allows optimal output filter selection over wide input voltage range. The UCC25230 has fixed frequency set internally at 380 kHz. It also includes input voltage UVLO and OVLO comparators with hysteresis and input-good, open-collector output signal which can be used to enable PWM controllers.

UCC25230 is available in a thermally enhanced 8-pin SON package with PowerPad serving as a ground pin.

Other features include internal soft start and cycle-by-cycle current protection. Measured efficiency of isolated converter over input voltage and output current ranges are shown in .

The UCC25230 is a highly integrated PWM converter operating as an isolated forward flyback. It has high-side and low-side power switches integrated and the control circuit with all key converter functions included. The power stage requires only one- or multiple winding coupled inductor and output capacitors for the complete solution. Voltage-mode feed-forward control with external compensation allows optimal output filter selection over wide input voltage range. The UCC25230 has fixed frequency set internally at 380 kHz. It also includes input voltage UVLO and OVLO comparators with hysteresis and input-good, open-collector output signal which can be used to enable PWM controllers.

UCC25230 is available in a thermally enhanced 8-pin SON package with PowerPad serving as a ground pin.

Other features include internal soft start and cycle-by-cycle current protection. Measured efficiency of isolated converter over input voltage and output current ranges are shown in .

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기
유형 직함 날짜
* Data sheet 12-V to 100-V Input, 0.2-A Output Switching Converter datasheet (Rev. B) 2012/04/13
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note UCC25230 Bias Power-Supply Design Review 2012/02/23
User guide Using the UCC25230EVM-662 2012/02/07
EVM User's guide Using the UCC25230EVM-754 2011/09/28

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCD3138HSFBEVM-029 — UCD3138 하드 스위칭 풀 브리지 컨버터 평가 모듈

텍사스 인스트루먼트 UCD3138HSFBEVM-029 평가 모듈(EVM)은 UCD3138RHA 프로그래머블 디지털 전원 컨트롤러를 기반으로 한 디지털 제어 하드 스위칭 풀 브리지 컨버터입니다. EVM은 48V의 시스템을 위해 설계된 독립형 대칭 HSFB(하드 스위칭 풀 브리지) DC-DC 전원 컨버터입니다. UCD3138HSFBEVM-029는 36~72Vdc의 DC 입력을 수용하며, 최대 출력 부하 전력 360W 또는 최대 출력 전류 30A의 공칭 12Vdc를 출력합니다. 이러한 보호 기능에는 과전압, 저전압, 과전류 및 과열이 (...)

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

UCC25230 TINA-TI Transient Reference Design

SLUM299.TSC (399 KB) - TINA-TI Reference Design
시뮬레이션 모델

UCC25230 TINA-TI Transient Spice Model

SLUM300.ZIP (23 KB) - TINA-TI Spice Model
시뮬레이션 모델

UCC25230 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM240A.ZIP (49 KB) - PSpice Model
레퍼런스 디자인

PMP8877 — 1/8 브릭 절연 DC/DC 텔레콤 전원 모듈 디지털 제어 레퍼런스 디자인

PMP8877은 UCD3138 디지털 전원 컨트롤러를 기반으로 한 완전한 기능을 갖춘 1/8 브릭 절연 DC/DC 텔레콤 전원 모듈입니다. 이 레퍼런스 설계는 광범위한 36V~72V 입력 소스에서 작동하는 12V/180W의 출력 전력을 제공하는 2차측 제어 및 하드 스위칭 풀 브리지 전원 토폴로지를 특징으로 합니다. 레퍼런스 설계의 하이라이트는 94%의 최대 효율, 입력 전압 서지에 대한 빠른 입력 전압 피드 포워드 응답, 정전류/정전력 과부하 보호, 프리바이어스 시동, 병렬 모듈 애플리케이션을 위한 전류 공유 제어, 피어 (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP8878 — 1/8 브릭 절연 DC/DC 텔레콤 전원 모듈 레퍼런스 디자인

PMP8878 is a full-function 1/8th brick isolated DC/DC telecom power module based on UCC28250 advanced PWM controller. The reference design features secondary side control and hard switching full bridge power topology to deliver 12V/180W of output power operating across a wide range 40V-75V input (...)
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VSON (DRM) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상