產品詳細資料

Number of series cells 1, 2, 3, 4, 5, 6, 7 Charge current (max) (A) 10 Vin (max) (V) 28 Cell chemistry Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 1.8 Battery charge voltage (max) (V) 26 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit) Vin (min) (V) 5 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1, 2, 3, 4, 5, 6, 7 Charge current (max) (A) 10 Vin (max) (V) 28 Cell chemistry Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 1.8 Battery charge voltage (max) (V) 26 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit) Vin (min) (V) 5 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGE) 24 16 mm² 4 x 4
  • 300-kHz NMOS-NMOS Synchronous Buck
    Converter
  • Stand-Alone Charger Specifically for Lithium
    Phosphate
  • 5-V–28-V VCC Input Operating Range,
    Supports 1–7 Battery Cells
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
  • Integration
    • Automatic System Power Selection From
      Adapter or Battery
    • Internal Loop Compensation
    • Internal Soft Start
    • Dynamic Power Management (DPM)
  • Safety Protection
    • Input Overvoltage Protection
    • Battery Thermistor Sense Suspend Charge at
      Hot/Cold and Automatically ICHARGE/8 at
      Hot/Cold or Warm/Cool
    • Battery Detection
    • Reverse Protection Input FET
    • Programmable Safety Timer
    • Charge Overcurrent Protection
    • Battery Short Protection
    • Battery Overvoltage Protection
    • Thermal Shutdown
  • Status Outputs
    • Adapter Present
    • Charger Operation Status
  • Charge Enable Pin
  • 6-V Gate Drive for Synchronous Buck Converter
  • 30-ns Driver Dead Time and 99.95% Max.
    Effective Duty Cycle
  • 24-Pin 4-mm × 4-mm QFN Package
  • Energy Star Low Quiescent Current Iq
    • < 15-µA Off-State Battery Discharge Current
    • < 1.5-mA Off-State Input Quiescent Current
  • APPLICATIONS
    • Power Tool and Portable Equipment
    • Personal Digital Assistants
    • Handheld Terminals
    • Industrial and Medical Equipment
    • Netbook, Mobile Internet Device, and Ultra-Mobile
      PC

All other trademarks are the property of their respective owners

  • 300-kHz NMOS-NMOS Synchronous Buck
    Converter
  • Stand-Alone Charger Specifically for Lithium
    Phosphate
  • 5-V–28-V VCC Input Operating Range,
    Supports 1–7 Battery Cells
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
  • Integration
    • Automatic System Power Selection From
      Adapter or Battery
    • Internal Loop Compensation
    • Internal Soft Start
    • Dynamic Power Management (DPM)
  • Safety Protection
    • Input Overvoltage Protection
    • Battery Thermistor Sense Suspend Charge at
      Hot/Cold and Automatically ICHARGE/8 at
      Hot/Cold or Warm/Cool
    • Battery Detection
    • Reverse Protection Input FET
    • Programmable Safety Timer
    • Charge Overcurrent Protection
    • Battery Short Protection
    • Battery Overvoltage Protection
    • Thermal Shutdown
  • Status Outputs
    • Adapter Present
    • Charger Operation Status
  • Charge Enable Pin
  • 6-V Gate Drive for Synchronous Buck Converter
  • 30-ns Driver Dead Time and 99.95% Max.
    Effective Duty Cycle
  • 24-Pin 4-mm × 4-mm QFN Package
  • Energy Star Low Quiescent Current Iq
    • < 15-µA Off-State Battery Discharge Current
    • < 1.5-mA Off-State Input Quiescent Current
  • APPLICATIONS
    • Power Tool and Portable Equipment
    • Personal Digital Assistants
    • Handheld Terminals
    • Industrial and Medical Equipment
    • Netbook, Mobile Internet Device, and Ultra-Mobile
      PC

All other trademarks are the property of their respective owners

The bq24630 is a highly integrated lithium phosphate switched-mode battery charge controller. The device offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation, and charge status monitoring.

The bq24630 charges the battery in three phases: preconditioning, constant current, and constant voltage. Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup. The bq24630 automatically restarts the charge cycle if the battery voltage falls below an internal threshold and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.

The bq24630 is a highly integrated lithium phosphate switched-mode battery charge controller. The device offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation, and charge status monitoring.

The bq24630 charges the battery in three phases: preconditioning, constant current, and constant voltage. Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup. The bq24630 automatically restarts the charge cycle if the battery voltage falls below an internal threshold and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet bq24630 Standalone Synchronous Switched-Mode Lithium Phosphate Battery Charger With System Power Selector and Low Iq datasheet (Rev. B) PDF | HTML 2015年 7月 31日
Application note LiFePO4 Design Considerations PDF | HTML 2023年 7月 26日
Application note BQ241xx/BQ246xx Selection of Multi-Cell Standalone Switching Battery Chargers 2019年 12月 31日
User guide bq2461x/bq2463x (HPA422A) Multi-Cell Synchronous Switch-Mode Charger (Rev. A) 2010年 7月 27日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ24630EVM — 用於 BQ24630 多芯同步切換模式充電器的評估模組

The bq2461x is highly integrated Li-ion or Li-polymer switch-mode battery charge controllers. The bq2463x is highly integrated switch-mode battery charge controllers designed specifically to charge Lithium Phosphate battery chemistries. They offer a constant-frequency synchronous PWM controller (...)

使用指南: PDF
TI.com 無法提供
計算工具

SLUC175 bq246xx Calculation Tool V1.5

支援產品和硬體

支援產品和硬體

產品
電池充電器 IC
BQ24600 獨立式 1-6 芯降壓電池充電控制器 BQ24610 獨立式 1-6 芯降壓電池充電控制器,具 5V-28V 輸入 BQ24616 符合 JEITA 標準的獨立式 1-6 芯降壓電池充電控制器 BQ24617 獨立式 1-5 芯降壓電池充電控制器,具 5V-24V 輸入 BQ24618 獨立式 1-6 芯降壓電池充電控制器,具 5V-28V 輸入且適用 USB BQ24620 適用鋰磷酸鹽電池的獨立式 1-7 芯降壓電池充電控制器 BQ24630 具系統電源且適用 LiFePO4 電池的獨立式 1-7 芯降壓電池充電器控制器 BQ24640 適用超級電容器的獨立式 1-8 芯降壓電池充電器 BQ24650 具太陽能輸入和整合式 MPPT 的獨立式 1-6 芯降壓電池充電控制器
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片