The Texas Instruments bq27411-G1 device is a battery fuel gauging solution for single-cell Li-Ion battery packs. The device requires minimal configuration and uses One Time Programmable (OTP) Non-Volatile Memory (NVM) to avoid an initialization download by the system processor.
The fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV).
The small, 12-pin, 2.50 mm × 4.00 mm, Small Outline No-Lead (SON) package is ideal for space-constrained applications.
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | bq27411-G1 Single-Cell Li-Ion Battery Fuel Gauge for Battery Pack Integration datasheet (Rev. D) | PDF | HTML | 2016年 1月 2日 |
| Application note | Method for TI Gauge to Avoid SOC Jump on Smart Phone Application | 2022年 2月 25日 | ||
| Application note | Enhanced Resolution Gauging for Low Current Applications Using Scaling | 2016年 10月 26日 | ||
| User guide | bq27411EVM System-Side Impedance Track Fuel Gauge (Rev. A) | 2016年 7月 31日 | ||
| User guide | bq27411-G1 Technical Reference Manual (Rev. B) | 2015年 6月 5日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
The BQ27411EVM-G1C Pack-Side Impedance Track™ Fuel (Gas) Gauge evaluation module is a complete evaluation system for the bq27411-G1C. The EVM includes one bq27411-G1C circuit module with external current-sense resistor. The bq27411-G1C should be used with batteries that have a 4.35 V (...)
BQ-BATTERY-PROGRAMMER-SW software development kit (SDK) is a collection of robust software command line tools that assist with the process of programming, testing, or assembling packs that use TI Battery management products. The executables in this software work with the MKST-3P-ALT-EV2300 MKS (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSON (DRZ) | 12 | Ultra Librarian |
Software installer to enable BQEVSW to use MKST-3P-ALT-EV2300
Software manifest
Description:
BQEVSW-MKST-UPDATE software is a software update for BQEVSW (bq Evaluation Software) and BQEASY (bq EV-Easy) to allow it to work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. This update installs a program that allows switching the USB transceiver target in software like BQEVSW and BQEASY from/to EV2300 to/from MKST-3P-ALT-EV2300.
The program requires administrator privileges.
Requirements:
Features:
Getting started:
1. Download the software
2. Run the installer and check the option to create shortcuts
3. Run the program using shortcut named BQEVSW-MKST-UPDATE from Start menu/Desktop
4. Allow administrator privilege when/if prompted
5. On the GUI window that opens, select the target transceiver to support and follow steps to switch
6. Connect matching transceiver and start BQEVSW, BQEASY or other similar software.
Note: BQMTESTER-MKST-UPDATE and BQEVSW-MKST-UPDATE both update the same software components. Switching the USB transceiver using any of these shortcuts will also switch it in the other.