支援軟體
DRV8886
- PWM microstepping stepper motor driver
- Up to 1/16 microstepping
- Non-circular and standard ½ step modes
- Integrated current sense functionality
- No sense resistors required
- ±6.25% Full-scale current accuracy
- Slow and mixed decay options
- 8 to 37-V Operating supply voltage range
- Low RDS(ON): 550 mΩ HS + LS at 24 V, 25°C
- High current capacity
- 3-A Peak per bridge
- 2-A Full-scale per bridge
- 1.4-A rms per bridge
- Fixed off-time PWM current regulation
- Simple STEP/DIR interface
- Low-current sleep mode (20 µA)
- Small package and footprint
- 24 HTSSOP PowerPAD™ package
- 28 WQFN package
- Protection features
- VM Undervoltage lockout (UVLO)
- Charge pump undervoltage (CPUV)
- Overcurrent protection (OCP)
- Thermal shutdown (TSD)
- Fault condition indication pin (nFAULT)
The DRV8886 is a stepper motor driver for industrial and consumer end equipment applications. The device is fully integrated with two N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sensing. The DRV8886 is capable of driving up to 2-A full scale or 1.4-A rms output current (24-V and TA = 25°C, dependent on PCB design).
The DRV8886 uses an internal current sense architecture to eliminate the need for two external power sense resistors, saving PCB area and system cost. The DRV8886 uses an internal fixed off-time PWM current regulation scheme adjustable between slow and mixed decay options.
A simple STEP/DIR interface allows an external controller to manage the direction and step rate of the stepper motor. The device can be configured in different step modes ranging from full-step to 1/16 microstepping. A low-power sleep mode is provided for very low standby quiescent standby current using a dedicated nSLEEP pin.
Device protection features are provided for supply undervoltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the nFAULT pin.
您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的裝置不同
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DRV8886 2-A Stepper Motor Driver With Integrated Current Sense datasheet (Rev. C) | PDF | HTML | 2020年 3月 11日 |
| Application brief | Advantages of Integrated Current Sensing (Rev. B) | PDF | HTML | 2022年 6月 20日 | |
| Application note | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021年 10月 14日 | |
| Application note | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 2021年 1月 19日 | |
| Application note | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018年 7月 6日 | ||
| EVM User's guide | DRV8886 Evaluation Module User's Guide | 2017年 2月 1日 | ||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 2004年 5月 12日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DRV8886EVM — 具有整合感測電阻的 2.0A 步進馬達驅動器評估模組
The DRV8886 evaluation module (EVM) demonstrates the integrated current sensing capabilities and performance of the DRV8886 integrated circuit from Texas Instruments. The EVM includes the DRV8886 to control a stepper motor, a MSP430F2617 to control the DRV8886 inputs, and a USB to UART to (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 24 | Ultra Librarian |
| WQFN (RHR) | 28 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。