IDE、配置、編譯器或偵錯程式
ASC-STUDIO-HDC3020 — ASC studio for configuring all aspects of the HDC3020 humidity sensor
SysConfig can be used to help simplify configuration challenges and accelerate software development with the HDC3020 humidity sensor.
HDC3020
- Relative humidity (RH) sensor:
- Operating range: 0% to 100%
- Accuracy: ±0.5% typical
- Offset Error Correction: reduces offset to return device to within accuracy specification
- Long-term drift: 0.19%RH/yr
- Condensation protection with integrated heater
- Temperature sensor:
- Operating range: –40°C to 125°C
- Accuracy: ±0.1°C typical
- Long-term drift: ±0.03°C/yr
- NIST traceability: relative humidity & temperature
-
Output Short Circuit Protection
- Low power: average current 0.4µA
- I2C interface compatibility up to 1MHz speeds
- Four selectable I2C addresses
- Data protection through CRC checksum
- Supply voltage: 1.62V to 5.50V
- Available auto measurement mode
- Programmable interrupts
- Programmable RH and Temp measurement offset
- Factory-installed polyimide tape assembly cover
- Factory-installed IP67 rated environmental cover
The HDC302x is an integrated, capacitive based relative humidity (RH) and temperature sensor . The device provides high accuracy measurements over a wide supply range (1.62V – 5.5V) and ultra low power consumption in a compact 2.5mm × 2.5mm × 0.8mm WSON 8-pin package. Both the temperature and humidity sensors are 100% tested and trimmed on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 standards.
Offset Error Correction reduces RH sensor offset due to aging, exposure to extreme operating conditions, and contaminants to return device to within accuracy specifications. For battery IoT applications, auto measurement mode and ALERT feature enable low system power by maximizing MCU sleep time. There are four different I2C addresses that support speeds up to 1MHz. A heater is available to dissipate condensation and moisture.
The HDC3020 is an open cavity package without protective cover. Two device variants have a cover option to protect the open cavity RH sensor: HDC3021 and HDC3022. HDC3021 has removable protective tape to allow conformal coatings and PCB wash. HDC3022 has a permanent IP67 filter membrane to protect against dust and water condensation.
索取更多資訊
提供 NIST 校準文件。立即索取
您可能會感興趣的類似產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 13 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
HDC3020EVM — 適用於溫度和濕度感測器的 HDC3020 耗評估模組
設計人員可利用 HDC3020EVM 評估模組 (EVM) 評估 HDC3020 相對濕度及溫度感測器的操作和性能。此 EVM 託管 MSP430F5528 微控制器 (µC) 以及 HDC3020。µC 用於控制 HDC3020 並透過 USB 埠與主機 PC 通訊。如有必要 EVM 的設計可分成兩個部分。穿孔允許使用者中斷 HDC3020 的連接，以靈活地進行評估。
開發板
HDC3020FLXEVM — HDC3020 flexible printed circuit evaluation module
The HDC3020FLXEVM is a flexible printed circuit (FPC) based breakout sensor board. It enables users to evaluate the performance of the HDC3020 digital relative humidity (RH) and temperature sensor on a compact and easy-to-use circuit board.
參考設計
TIDA-010254 — 具有 Sub-1GHz 和 Bluetooth® 5.2 的電池供電 mmWave 雷達感測器參考設計
此工業參考設計展示將電池供電 IWRL6432 60 GHz mmWave 雷達搭配 Sub-1GHz 或 Bluetooth® 5.2 無線通訊使用。此設計透過鋰電池，以人數計算和追蹤以及動作追蹤應用進行展示，前述應用會透過 Sub-1G 或 Bluetooth 將結果傳送至遠端主機，同時也相容於任何現有 IWRL6432 軟體。此參考設計將 LAUNCHXLCC1352R1 無線微控制器 LaunchPad™ 與 PC GUI 搭配使用，以視覺方式顯示雷達感測數據及偵測結果。
Design guide: PDF
參考設計
TIDA-010253 — Battery control unit reference design for energy storage systems
This reference design is a central controller for a high-voltage Lithium-ion (Li-ion), lithium iron phosphate (LiFePO4) battery rack. This design provides driving circuits for high-voltage relay, communication interfaces, (including RS-485, controller area network (CAN), daisy chain, and Ethernet), (...)
Design guide: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DEF) | 8 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點