產品詳細資料

Number of input channels 2 Operating temperature range (°C) -40 to 150 Vs (min) (V) 3.3 Vs (max) (V) 30 Interface type 4-20mA, I2C, OWI, Ratiometric analog voltage Resolution (Bits) 24 Rating Military
Number of input channels 2 Operating temperature range (°C) -40 to 150 Vs (min) (V) 3.3 Vs (max) (V) 30 Interface type 4-20mA, I2C, OWI, Ratiometric analog voltage Resolution (Bits) 24 Rating Military
VQFN (RHH) 36 36 mm² 6 x 6
  • Analog features:
    • Analog front-end for resistive bridge sensors
    • Accommodates sensor sensitivities from 1mV/V to 135mV/V
    • On-chip temperature sensor
    • Programmable gain
    • 24-bit sigma-delta analog-to-digital converter for signal channel
    • 24-bit sigma-delta analog-to-digital converter for temperature channel
    • 14-bit output DAC
  • Digital features:
    • FSO accuracy across temperature: < 0.1%
    • System response time: < 220µs
    • Third-order offset, gain, and nonlinearity temperature compensation
    • Diagnostic functions
    • Integrated EEPROM for device operation, calibration data and user data
  • Peripheral features:
    • I2C interface for data reading and device configuration
    • One-wire interface enables communication through the power supply pin without using additional lines
    • Current loop interface: 4mA to 20mA
    • Ratiometric and absolute voltage output
    • Power management control
    • Analog low-voltage detect
  • General features:
    • Industrial temperature range: –40°C to 150°C
    • Power supply:
      • On-chip power management accepts wide power-supply voltage from 3.3V to 30V
      • Integrated reverse-protection circuit
  • Analog features:
    • Analog front-end for resistive bridge sensors
    • Accommodates sensor sensitivities from 1mV/V to 135mV/V
    • On-chip temperature sensor
    • Programmable gain
    • 24-bit sigma-delta analog-to-digital converter for signal channel
    • 24-bit sigma-delta analog-to-digital converter for temperature channel
    • 14-bit output DAC
  • Digital features:
    • FSO accuracy across temperature: < 0.1%
    • System response time: < 220µs
    • Third-order offset, gain, and nonlinearity temperature compensation
    • Diagnostic functions
    • Integrated EEPROM for device operation, calibration data and user data
  • Peripheral features:
    • I2C interface for data reading and device configuration
    • One-wire interface enables communication through the power supply pin without using additional lines
    • Current loop interface: 4mA to 20mA
    • Ratiometric and absolute voltage output
    • Power management control
    • Analog low-voltage detect
  • General features:
    • Industrial temperature range: –40°C to 150°C
    • Power supply:
      • On-chip power management accepts wide power-supply voltage from 3.3V to 30V
      • Integrated reverse-protection circuit

The PGA305 device supplies an interface for piezoresistive and strain-gauge pressure-sense elements. The device is a full system-on-chip (SoC) solution that includes programmable analog front end (AFE), ADC, and digital signal processing that enable direct connection to the sense element. The PGA305 device also includes integrated voltage regulators and an oscillator to minimize the number of external components. The PGA305 device can employ third-order temperature and nonlinearity compensation to achieve high accuracy. The device can also use the integrated I2C interface or the one-wire serial interface (OWI) to achieve external communication and simplify the system calibration process. An Integrated DAC supports absolute-voltage, ratiometric-voltage, and 4mA to 20mA current-loop outputs.

The PGA305 device supplies an interface for piezoresistive and strain-gauge pressure-sense elements. The device is a full system-on-chip (SoC) solution that includes programmable analog front end (AFE), ADC, and digital signal processing that enable direct connection to the sense element. The PGA305 device also includes integrated voltage regulators and an oscillator to minimize the number of external components. The PGA305 device can employ third-order temperature and nonlinearity compensation to achieve high accuracy. The device can also use the integrated I2C interface or the one-wire serial interface (OWI) to achieve external communication and simplify the system calibration process. An Integrated DAC supports absolute-voltage, ratiometric-voltage, and 4mA to 20mA current-loop outputs.

下載
索取更多資訊

提供完整的產品規格表。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet PGA305 Signal Conditioner and Transmitter for Pressure Sensors datasheet PDF | HTML 2024年 8月 14日

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​