SN74CB3T3257

Name: SN74CB3T3257
Brand: TI
SKU: SN74CB3T3257
Price: 0.569 USD

現行

具有電平移位器的 3.3-V、2:1 (SPDT)、4 通道 FET 匯流排開關

立即訂購

產品規格表

document-pdfAcrobat SN74CB3T3257 datasheet (英文)

SN74CB3T3257

現行

產品規格表

立即訂購

產品詳細資料

Configuration

2:1 SPDT

Number of channels

4

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I2S, JTAG, RGMII, SPI, TDM, UART

Ron (typ) (Ω)

5

CON (typ) (pF)

4

ON-state leakage current (max) (µA)

20

Bandwidth (MHz)

100

Operating temperature range (°C)

-40 to 85

Features

Powered-off protection, Signal path translation

Input/output continuous current (max) (mA)

128

Rating

Catalog

Drain supply voltage (max) (V)

3.6

Supply voltage (max) (V)

3.6

Configuration

2:1 SPDT

Number of channels

4

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I2S, JTAG, RGMII, SPI, TDM, UART

Ron (typ) (Ω)

5

CON (typ) (pF)

4

ON-state leakage current (max) (µA)

20

Bandwidth (MHz)

100

Operating temperature range (°C)

-40 to 85

Features

Powered-off protection, Signal path translation

Input/output continuous current (max) (mA)

128

Rating

Catalog

Drain supply voltage (max) (V)

3.6

Supply voltage (max) (V)

3.6

TSSOP (PW)

16

32 mm² 5 x 6.4

TVSOP (DGV)

16

23.04 mm² 3.6 x 6.4

Output Voltage Translation Tracks V_CC
Supports Mixed-Mode Signal Operation On All Data I/O Ports
- 5-V Input Down To 3.3-V Output Level Shift With 3.3-V V_CC
- 5-V/3.3-V Input Down To 2.5-V Output Level Shift With 2.5-V V_CC
5-V Tolerant I/Os With Device Powered-Up or Powered-Down
Bidirectional Data Flow, With Near-Zero Propagation Delay
Low ON-State Resistance (r_on) Characteristics (r_on = 5 Typical)
Low Input/Output Capacitance Minimizes Loading (C_io(OFF) = 5 pF Typical)
Data and Control Inputs Provide Undershoot Clamp Diodes
Low Power Consumption (I_CC = 20 µA Max)
V_CC Operating Range From 2.3 V to 3.6 V
Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
I_off Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
Supports Digital Applications: Level Translation, USB Interface, Memory Interleaving, Bus Isolation
Ideal for Low-Power Portable Equipment

Output Voltage Translation Tracks V_CC
Supports Mixed-Mode Signal Operation On All Data I/O Ports
- 5-V Input Down To 3.3-V Output Level Shift With 3.3-V V_CC
- 5-V/3.3-V Input Down To 2.5-V Output Level Shift With 2.5-V V_CC
5-V Tolerant I/Os With Device Powered-Up or Powered-Down
Bidirectional Data Flow, With Near-Zero Propagation Delay
Low ON-State Resistance (r_on) Characteristics (r_on = 5 Typical)
Low Input/Output Capacitance Minimizes Loading (C_io(OFF) = 5 pF Typical)
Data and Control Inputs Provide Undershoot Clamp Diodes
Low Power Consumption (I_CC = 20 µA Max)
V_CC Operating Range From 2.3 V to 3.6 V
Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
I_off Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
Supports Digital Applications: Level Translation, USB Interface, Memory Interleaving, Bus Isolation
Ideal for Low-Power Portable Equipment

The SN74CB3T3257 is a high-speed TTL-compatible FET multiplexer/demultiplexer with low ON-state resistance (r_on), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks V_CC. The SN74CB3T3257 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels (see Figure 1).

The SN74CB3T3257 is a 4-bit 1-of-2 multiplexer/demultiplexer with a single output-enable (OE)\ input. The select (S) input controls the data path of the multiplexer/demultiplexer. When OE\ is low, the multiplexer/demultiplexer is enabled, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the multiplexer/demultiplexer is disabled, and a high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74CB3T3257 is a high-speed TTL-compatible FET multiplexer/demultiplexer with low ON-state resistance (r_on), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks V_CC. The SN74CB3T3257 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels (see Figure 1).

The SN74CB3T3257 is a 4-bit 1-of-2 multiplexer/demultiplexer with a single output-enable (OE)\ input. The select (S) input controls the data path of the multiplexer/demultiplexer. When OE\ is low, the multiplexer/demultiplexer is enabled, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the multiplexer/demultiplexer is disabled, and a high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

filter

尋找其它類比交換器與多工器

下載觀看有字幕稿的影片影片

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 14

	類型	標題		日期
*	Data sheet	SN74CB3T3257 datasheet		2003年 10月 15日
	Application note	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	2022年 6月 2日
	Application note	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	2021年 12月 1日
	Application note	CBT-C, CB3T, and CB3Q Signal-Switch Families (Rev. C)	PDF \| HTML	2021年 11月 19日
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	2021年 1月 6日
	Selection guide	Logic Guide (Rev. AB)		2017年 6月 12日
	Application note	How to Select Little Logic (Rev. A)		2016年 7月 26日
	Application note	Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)		2015年 12月 2日
	User guide	LOGIC Pocket Data Book (Rev. B)		2007年 1月 16日
	More literature	Digital Bus Switch Selection Guide (Rev. A)		2004年 11月 10日
	Application note	Semiconductor Packing Material Electrostatic Discharge (ESD) Protection		2004年 7月 8日
	Application note	Selecting the Right Level Translation Solution (Rev. A)		2004年 6月 22日
	User guide	Signal Switch Data Book (Rev. A)		2003年 11月 14日
	Application note	Bus FET Switch Solutions for Live Insertion Applications		2003年 2月 7日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

介面轉接器

LEADED-ADAPTER1 — 適用於快速測試 TI 的 5、8、10、16 及 24 針腳引線封裝的表面貼裝至 DIP 接頭適配器

The EVM-LEADED1 board allows for quick testing and bread boarding of TI's common leaded packages. The board has footprints to convert TI's D, DBQ, DCT,DCU, DDF, DGS, DGV, and PW surface mount packages to 100mil DIP headers.

使用指南: PDF