TAS5404-Q1
- TAS5404-Q1 – Single-Ended Input
- Four-Channel Class-D Power Amplifier
- Four Analog Inputs, Four BTL Power Outputs
- Typical Output Power at 10% THD+N
- 26 W/Ch Into 4 Ω at 14.4 V
- 45 W/Ch Into 2 Ω at 14.4 V
- Channels Can Be Paralleled (PBTL) for High-
Current Applications - THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
- Patented Pop-and-Click-Reduction Technology
- Soft Muting With Gain Ramp Control
- Common-Mode Ramping
- Patented AM Interference Avoidance
- Patented Cycle-by-Cycle Current Limit
- 75dB PSRR
- Four-Address I2C Serial Interface for Device
Configuration and Control - Channel Gains: 12 dB, 20 dB, 26 dB, 32 dB
- Load Diagnostic Functions:
- Output Open and Shorted Load
- Output-to-Power and Output-to-Ground Shorts
- Patented Tweeter Detection
- Protection and Monitoring Functions:
- Short-Circuit Protection
- Load-Dump Protection to 50 V
- Fortuitous Open-Ground and Open-Power
Tolerant - Patented Output DC Level Detection While
Music Playing - Overtemperature Protection
- Overvoltage and Undervoltage Conditions
- Clip Detection
- 64-Pin QFP (PHD) Power Package With Heat
Slug Up - Designed for Automotive EMC Requirements
- Qualified According to AEC-Q100
- ISO9000:2002 TS16949-Certified
- –40°C to 105°C Ambient Temperature Range
The TAS5404-Q1 device is a four-channel class-D audio amplifier designed for use in automotive head units. The TAS5404-Q1 device provides four channels at 20 W continuously into 4 Ω at less than 1% THD+N from a 14.4-Vdc supply when used with the application circuit. The input is configured as an analog single-ended interface. The patented PWM topology of the device provides dramatic improvements in efficiency and audio performance over traditional linear amplifier solutions. The improvement in efficiency and audio performance reduces the power dissipated by the amplifier by a factor of ten under typical music playback conditions. The device incorporates all the required functions required by the OEM application. The built-in load diagnostic functions for detecting and diagnosing disconnected speakers help reduce test time during the manufacturing process.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TAS5404-Q1: 26-W Analog Single-Ended Input 4-Channel Class-D Amp with Load Dump Protection and I2C Diagnostics datasheet (Rev. A) | PDF | HTML | 2015年 10月 2日 |
| Application note | Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) | 2019年 8月 26日 | ||
| Technical article | The head unit: understanding car audio amplifier system demands – part 1 | PDF | HTML | 2016年 1月 14日 | |
| EVM User's guide | TAS5404Q1EVM User Guide | 2015年 10月 2日 | ||
| Application note | Class-D LC Filter Design (Rev. B) | 2015年 2月 20日 | ||
| Application note | AN-1737 Managing EMI in Class D Audio Applications (Rev. A) | 2013年 5月 1日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TAS5404Q1EVM — 適用於車用音響主機且具有 I2C 診斷和保護的四通道類比輸入 D 類音訊放大器 EVM
The TAS5404Q1EVM showcases TI’s cost-optimized 4-Ch Analog Input Class-D Audio Solution for Automotive Head Unit systems. The TAS5404 solution allows automotive customers the easiest transition from Class-AB systems to a smaller, lighter and more efficient Class-D solution at a comparable (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TIDA-00573 — 用於音響主機的車用四通道 D 類放大器參考設計
PMP9484 — 具升壓轉換器的高效率小巧 100-W 汽車放大器參考設計
1.) Highly efficient single-phase synchronous boost converter using the LM5122 controller (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTQFP (PHD) | 64 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。