首頁 介面 I2C & I3C ICs I2C & I3C level shifters, buffers & hubs
首頁
介面
I2C & I3C ICs
I2C & I3C level shifters, buffers & hubs

TCA5013

現行

適用於 1 張使用者卡 + 3 個 SAM 的智慧卡介面 IC

立即訂購
產品規格表

TCA5013

現行
產品規格表 立即訂購

產品詳細資料

Features Smart Card Frequency (max) (MHz) 2.6 VCCA (min) (V) 0 VCCA (max) (V) 0 VCCB (min) (V) 0 VCCB (max) (V) 0 Supply restrictions No rule Rating Catalog Operating temperature range (°C) -40 to 85
Features Smart Card Frequency (max) (MHz) 2.6 VCCA (min) (V) 0 VCCA (max) (V) 0 VCCB (min) (V) 0 VCCB (max) (V) 0 Supply restrictions No rule Rating Catalog Operating temperature range (°C) -40 to 85
NFBGA (ZAH) 48 25 mm² 5 x 5
  • Operating supply voltage range of 2.7 V to 5.5 V
  • Supports EMV 4.3, ISO7816-3 and ISO7816-10 standards
  • Supports 1 user card and 3 secure access module cards
  • IEC61000-4-2 8-kV Contact discharge esd protection on all smartcard interface pins
  • Low power mode for power saving when inactive (shutdown mode)
  • Automatic card deactivation in the event of short circuit, card pull out, over temperature or power supply fault
  • Integrated DC-DC boost to generate VCC for 5 V and 3 V on all card interfaces
  • Automatic card clock generation for synchronous card activation
  • 4-byte FIFO for storing ATR from ISO7816-10 Type 1 cards
  • Programmable rise/fall time control for IO and clock lines of all smartcards
  • Input clock frequency up to 26 MHz
  • Tamper proof package design
  • Operating supply voltage range of 2.7 V to 5.5 V
  • Supports EMV 4.3, ISO7816-3 and ISO7816-10 standards
  • Supports 1 user card and 3 secure access module cards
  • IEC61000-4-2 8-kV Contact discharge esd protection on all smartcard interface pins
  • Low power mode for power saving when inactive (shutdown mode)
  • Automatic card deactivation in the event of short circuit, card pull out, over temperature or power supply fault
  • Integrated DC-DC boost to generate VCC for 5 V and 3 V on all card interfaces
  • Automatic card clock generation for synchronous card activation
  • 4-byte FIFO for storing ATR from ISO7816-10 Type 1 cards
  • Programmable rise/fall time control for IO and clock lines of all smartcards
  • Input clock frequency up to 26 MHz
  • Tamper proof package design

TCA5013 is a smartcard interface IC that is targeted for use in Point of Sale (POS) terminals. The device enables POS terminals to interface with EMV4.3, ISO7816-3 and ISO7816-10 compliant cards. It supports up to 3 Secure Access Module (SAM) cards in addition to 1 user card. It operates from a single supply and generates all the card voltages. The device is controlled by a standard I2C interface and is capable of card activation and deactivation per EMV4.3 and ISO7816-3 standards. In addition it also supports ISO7816-10 synchronous cards. It has a 4-byte FIFO that stores the ATR (Answer to Reset) sequence in ISO7816-10 type 1 cards. Synchronous cards (ISO7816-10 type 1 and type 2) can be set up for automatic activation or manual activation. The device has multiple power saving modes and also supports power saving in the smartcard itself by “clock stop” or lowering clock frequency to lowest allowable levels per the ISO7816 - 3 standard. TCA5013 has IEC 61000-4-2 8kV contact discharge on all pins that interface with smartcards. This enables the system to be resistant to ESD in the field without the need for external ESD devices. It is available in an 5 mm x 5 mm BGA package. The pin out of the device is such that all the IO pins are securely surrounded by other pins. This prevents the secure pins from being probed during device operation.

TCA5013 is a smartcard interface IC that is targeted for use in Point of Sale (POS) terminals. The device enables POS terminals to interface with EMV4.3, ISO7816-3 and ISO7816-10 compliant cards. It supports up to 3 Secure Access Module (SAM) cards in addition to 1 user card. It operates from a single supply and generates all the card voltages. The device is controlled by a standard I2C interface and is capable of card activation and deactivation per EMV4.3 and ISO7816-3 standards. In addition it also supports ISO7816-10 synchronous cards. It has a 4-byte FIFO that stores the ATR (Answer to Reset) sequence in ISO7816-10 type 1 cards. Synchronous cards (ISO7816-10 type 1 and type 2) can be set up for automatic activation or manual activation. The device has multiple power saving modes and also supports power saving in the smartcard itself by “clock stop” or lowering clock frequency to lowest allowable levels per the ISO7816 - 3 standard. TCA5013 has IEC 61000-4-2 8kV contact discharge on all pins that interface with smartcards. This enables the system to be resistant to ESD in the field without the need for external ESD devices. It is available in an 5 mm x 5 mm BGA package. The pin out of the device is such that all the IO pins are securely surrounded by other pins. This prevents the secure pins from being probed during device operation.
filter 尋找其它 I2C & I3C level shifters, buffers & hubs
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TCA5013 Feature Rich Smartcard Interface IC with 1 User Card and 3 SAM Card Support datasheet (Rev. C) PDF | HTML 2019年 9月 24日
Application note Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024年 7月 3日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TMDXEVM438X-EPOS — AM438x 電子銷售點 (EPOS) 評估模組

The AM438x Electronic Point of Sale (EPOS) Evaluation Module (EVM) enables developers to evaluate the TI SitaraTM AM438x processor family (AM4382, AM4384 and AM4388) and begin building Point of Sale (POS) applications such as handheld Electronic Financial Transaction (EFT) terminals, pin pads, (...)
使用指南: PDF
要求
模擬型號

TCA5013 IBIS Model

SCEM567.ZIP (268 KB) - IBIS Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-00818 — 行動銷售點 (mPOS) 電源參考設計

The TIDA-00818 is mobile point of sale (mPOS) reference design features a 1S1P Li-Ion battery architecture to reduce system size and cost. Integrated load switches are used to reduce standby power consumption and maximize battery life to enable the single-cell architecture. A USB Type-C charging (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDEP-0093 — 電子銷售點 (EPOS) 支付終端參考設計

Electronic Point of Sale (EPOS) payment terminals require features such as authenticated boot, tamper detection, DDR encryption and more. The EPOS reference design provides faster time to market with a processor that helps customers meet PCI-PTS and EMV requirements. This AM438x processor enables (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00382 — 智慧卡介面參考設計

The TIDA-00382 TCA5013 reference design solves EPOS smart card subsystem; allows customers pass EMV test much easier.  The TCA5013 reference design is built with one user card slot which allows the TCA5013 to detect the insertion and removal of the user card. The user card, also known as an IC (...)
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
NFBGA (ZAH) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片