首頁 感測器 溫度感測器 數位溫度感測器
首頁
感測器
溫度感測器
數位溫度感測器

TMP421

現行

採用 WCSP 且具 N-Factor 和串聯 R 校正的遠端與程和本機溫度感測器

立即訂購
產品規格表

TMP421

現行
產品規格表 立即訂購

產品詳細資料

Local sensor accuracy (max) 2.5 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features One-shot conversion Supply current (max) (µA) 38 Temp resolution (max) (bps) 12 Remote channels (#) 1 Addresses 9 Rating Catalog
Local sensor accuracy (max) 2.5 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features One-shot conversion Supply current (max) (µA) 38 Temp resolution (max) (bps) 12 Remote channels (#) 1 Addresses 9 Rating Catalog
DSBGA (YZD) 8 2.972025 mm² 2.295 x 1.295 SOT-23 (DCN) 8 4.64 mm² 2.9 x 1.6
  • SOT23-8 and DSBGA (WCSP) PACKAGES
  • ±1°C REMOTE DIODE SENSOR (MAX)
  • ±1.5°C LOCAL TEMPERATURE SENSOR (MAX)
  • SERIES RESISTANCE CANCELLATION
  • n-FACTOR CORRECTION
  • TWO-WIRE/SMBus™ SERIAL INTERFACE
  • MULTIPLE INTERFACE ADDRESSES
  • DIODE FAULT DETECTION
  • RoHS COMPLIANT AND NO Sb/Br
  • SOT23-8 and DSBGA (WCSP) PACKAGES
  • ±1°C REMOTE DIODE SENSOR (MAX)
  • ±1.5°C LOCAL TEMPERATURE SENSOR (MAX)
  • SERIES RESISTANCE CANCELLATION
  • n-FACTOR CORRECTION
  • TWO-WIRE/SMBus™ SERIAL INTERFACE
  • MULTIPLE INTERFACE ADDRESSES
  • DIODE FAULT DETECTION
  • RoHS COMPLIANT AND NO Sb/Br

The TMP421, TMP422, and TMP423 are remote temperature sensor monitors with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.

Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to configure the device.

The TMP421, TMP422, and TMP423 include series resistance cancellation, programmable non-ideality factor, wide remote temperature measurement range (up to +150°C), and diode fault detection.

The TMP421, TMP422, and TMP423 are all available in a SOT23-8 package. The TMP421C is also available in a DSBGA (WCSP) package.

The TMP421, TMP422, and TMP423 are remote temperature sensor monitors with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.

Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to configure the device.

The TMP421, TMP422, and TMP423 include series resistance cancellation, programmable non-ideality factor, wide remote temperature measurement range (up to +150°C), and diode fault detection.

The TMP421, TMP422, and TMP423 are all available in a SOT23-8 package. The TMP421C is also available in a DSBGA (WCSP) package.
filter 尋找其它 數位溫度感測器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TMP422 現行 採用 WCSP 且具 N-Factor 和串聯 R 校正的遠端與本機溫度感測器 1 local channel and 2 remote channels alternative in a SOT23-8 package

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet ±1°C Remote and Local Temperature Sensor datasheet (Rev. C) 2012年 5月 7日
Application note How to Read and Interpret Digital Temperature Sensor Output Data PDF | HTML 2024年 4月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

驅動程式或資料庫

TMP421SW-LINUX — 適用於 TMP421 的 Linux 驅動程式

The Linux driver supports the TMP421 series of Remote and Local Temp Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:
  • (...)
View Options
模擬型號

TMP4xx Family IBIS Model (Rev. A)

SBOM410A.ZIP (60 KB) - IBIS Model
下載
計算工具

SBOC594 — Remote Temperature Sensor Calibration Tool

支援產品和硬體

支援產品和硬體

產品
數位溫度感測器
TMP400 — 採用 QSSOP-16 且具 N-Factor 和串聯 R 校正的遠端和本機溫度感測器 TMP411 — 具有 N-Factor 和串聯電阻校正的遠端和本機溫度感測器 TMP421 — 採用 WCSP 且具 N-Factor 和串聯 R 校正的遠端與程和本機溫度感測器 TMP422 — 採用 WCSP 且具 N-Factor 和串聯 R 校正的遠端與本機溫度感測器 TMP423 — 具 N-Factor 和串聯 R 校正的三遠端和本機溫度感測器 TMP431 — 具自動 Beta、N-Factor 和串聯電阻校正的遠端和本機溫度感測器 TMP432 — 具自動 Beta、N-Factor 和串聯電阻校正的雙遠端和本機溫度感測器 TMP441 — 採用 SOT23 且具自動 Beta、N-Factor 和串聯電阻校正的多位址遠端和本機溫度感測器 TMP451 — 具 N-Factor 和串聯 R 校正的 1.7-V 遠端和本機溫度感測器 TMP461 — 具有針腳可編程匯流排位址的高準確度遠端和本機溫度感測器 TMP464 — 5 通道 (4 個遠端和 1 個本機) 高準確度遠端和本機溫度感測器 TMP468 — ±0.75⁰C 高精度多通道遠端和本機溫度感測器
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YZD) 8 Ultra Librarian
SOT-23 (DCN) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片