TPD4E101
- Provides System-Level ESD Protection for Low-
Voltage I/O Interface - IEC 61000-4-2 Level 4 ESD Protection
- ±15-kV Contact Discharge
- ±15-kV Air-Gap Discharge
- IEC 61000-4-5 (Surge): 3 A (8/20 µs)
- I/O Capacitance 4.8 pF (Typical)
- Dynamic Resistance 0.45 Ω (Typical)
- DC Breakdown Voltage ±6 V (Minimum)
- Ultra-Low Leakage Current 100 nA (Maximum)
Overtemperature - 10-V Clamping Voltage (Maximum at IPP = 1 A)
- Industrial Temperature Range: –40°C to +125°C
- Space Saving DPW package (0.8-mm × 0.8-mm)
The TPD4E101 device is a four-channel electrostatic discharge (ESD) transient voltage suppression (TVS) diode array in an ultra small 0.8-mm × 0.8-mm package. This TVS protection device offers ±15-kV contact ESD, ±15-kV IEC air-gap protection, and has four back-to-back TVS diodes for bipolar or bidirectional signal support. The 4.8-pF typical line capacitance of this ESD protection diode array is suitable for a wide range of applications supporting data rates up to 700 Mbps. The DPW package is convenient for component placement in space-constrained applications and the 0.48-mm pitch helps save on PCB manufacturing costs.
Typical applications of this ESD protection device are circuit protection for SIM cards, audio lines (microphones, earphones, and speakerphones), SD interfaces and pushbuttons. This ESD clamp is good for providing protection in end-equipment like cell phones, portable media players, wearables, set-top boxes, and eBooks.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPD4E101 4-Channel Bidirectional Low Capacitance ESD Protection Device with 15-kV Contact and Ultra-Low Clamping Voltage datasheet (Rev. E) | PDF | HTML | 2016年 4月 1日 |
User guide | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023年 9月 19日 | |
Selection guide | System-Level ESD Protection Guide (Rev. D) | 2022年 9月 7日 | ||
Application note | ESD Packaging and Layout Guide (Rev. B) | PDF | HTML | 2022年 8月 18日 | |
Application note | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022年 4月 7日 | |
User guide | Generic ESD Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021年 9月 27日 | |
Application brief | Choosing the Correct Models for ESD Devices | 2018年 5月 11日 | ||
White paper | Designing USB for short-to-battery tolerance in automotive environments | 2016年 2月 10日 | ||
Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 2012年 9月 25日 | ||
User guide | ESD PROTECTION DIODES EVM | 2012年 3月 26日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ESDEVM — ESD 評估模組
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
X2SON (DPW) | 4 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。