首頁 電源管理 電源開關 eFuses 和熱插拔制器
首頁
電源管理
電源開關
eFuses 和熱插拔制器

TPS1663

現行

具有輸出功率限制的 4.5V 至 60V、31mΩ、0.6-6A eFuse

立即訂購
產品規格表

TPS1663

現行
產品規格表 立即訂購

產品詳細資料

FET Internal Ron (typ) (mΩ) 31 Vin (min) (V) 4.5 Vin (max) (V) 60 Vabsmax_cont (V) 67 Current limit (min) (A) 0.6 Current limit (max) (A) 6 Overcurrent response Circuit breaker, Current limiting, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp, Cut-off Features Current monitoring, Fault output, Output power limiting, Power good signal UL recognition IEC62368, UL2367 TI functional safety category Functional Safety-Capable Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
FET Internal Ron (typ) (mΩ) 31 Vin (min) (V) 4.5 Vin (max) (V) 60 Vabsmax_cont (V) 67 Current limit (min) (A) 0.6 Current limit (max) (A) 6 Overcurrent response Circuit breaker, Current limiting, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp, Cut-off Features Current monitoring, Fault output, Output power limiting, Power good signal UL recognition IEC62368, UL2367 TI functional safety category Functional Safety-Capable Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4 VQFN (RGE) 24 16 mm² 4 x 4
  • 4.5-V to 60-V operating voltage, 67-V absolute maximum
  • Integrated 60-V, 31-mΩ RON hot-swap FET
  • 0.6-A to 6-A adjustable current limit (±7%)
  • Low quiescent current, 21 µA in shutdown
  • Adjustable output power limiting (TPS16632 only) (±6%)
  • Adjustable UVLO and OVP cutoff with ±2% accuracy
    • Fixed 39-V maximum overvoltage clamp (TPS16632 only)
  • Adjustable output slew rate control for inrush current limiting
    • Charges large and unknown capacitive loads through thermal regulation during device power up
  • Power Good output (PGOOD)
  • Selectable overcurrent fault response options between auto-retry and latch off (MODE)
  • Analog current monitor (IMON) output (±6%)
  • UL 2367 recognized
    • File No. E169910
    • RILIM ≥ 3 kΩ
  • IEC 62368-1 certified
  • Functional Safety-Capable
  • Available in easy-to-use 24-pin VQFN package
  • 4.5-V to 60-V operating voltage, 67-V absolute maximum
  • Integrated 60-V, 31-mΩ RON hot-swap FET
  • 0.6-A to 6-A adjustable current limit (±7%)
  • Low quiescent current, 21 µA in shutdown
  • Adjustable output power limiting (TPS16632 only) (±6%)
  • Adjustable UVLO and OVP cutoff with ±2% accuracy
    • Fixed 39-V maximum overvoltage clamp (TPS16632 only)
  • Adjustable output slew rate control for inrush current limiting
    • Charges large and unknown capacitive loads through thermal regulation during device power up
  • Power Good output (PGOOD)
  • Selectable overcurrent fault response options between auto-retry and latch off (MODE)
  • Analog current monitor (IMON) output (±6%)
  • UL 2367 recognized
    • File No. E169910
    • RILIM ≥ 3 kΩ
  • IEC 62368-1 certified
  • Functional Safety-Capable
  • Available in easy-to-use 24-pin VQFN package

The TPS1663x is an easy-to-use, positive 60-V, 6-A eFuse with a 31-mΩ integrated FET. Protection for the load, source, and eFuse itself are provided along with adjustable features such as accurate overcurrent protection, fast short circuit protection, output slew rate control, overvoltage protection and undervoltage lockout. The TPS16332 device integrates adjustable output power limiting (PLIM) functionality that simplifies and enables compliance to standards such as IEC61010-1 and UL1310. The device also includes adjustable overcurrent functionality. PGOOD can be used for enable and disable control of the downstream DC/DC converters.

A shutdown pin provides external control for enabling and disabling the internal FET, as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and a precise current monitor output. The MODE pin allows flexibility to configure the device between the two current-limiting fault responses (latch off and auto-retry).

The devices are available in a 4-mm × 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range.

The TPS1663x is an easy-to-use, positive 60-V, 6-A eFuse with a 31-mΩ integrated FET. Protection for the load, source, and eFuse itself are provided along with adjustable features such as accurate overcurrent protection, fast short circuit protection, output slew rate control, overvoltage protection and undervoltage lockout. The TPS16332 device integrates adjustable output power limiting (PLIM) functionality that simplifies and enables compliance to standards such as IEC61010-1 and UL1310. The device also includes adjustable overcurrent functionality. PGOOD can be used for enable and disable control of the downstream DC/DC converters.

A shutdown pin provides external control for enabling and disabling the internal FET, as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and a precise current monitor output. The MODE pin allows flexibility to configure the device between the two current-limiting fault responses (latch off and auto-retry).

The devices are available in a 4-mm × 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range.
filter 尋找其它 eFuses 和熱插拔制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TPS1653 現行 具脈衝電流支援的 58-V 4.5-A eFuse IPC9592B capable 58-V eFuse with pulse current support for load transient

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet TPS1663x 60-V, 6-A eFuse with Adjustable Output Power Limiting datasheet (Rev. F) PDF | HTML 2023年 2月 24日
Application note Reliable Startup with Large and Unknown Capacitive Loads (Rev. A) PDF | HTML 2022年 2月 7日
Functional safety information TPS1663 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2021年 6月 18日
Application note Parallel Operation of TPS2663 eFuses PDF | HTML 2020年 11月 16日
Application brief Single Point Failure Protection for Motor Drives and PLC Systems 2020年 6月 30日
Certificate TPSx663 UL Certificate of Compliance IEC 62368-1 2020年 4月 10日
Certificate TPSx663 UL Certificate of Compliance UL 2367 2020年 4月 10日
Functional safety information eFuse: Safety Certification and why it Matters 2020年 3月 18日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Technical article Optimizing power density with eFuses PDF | HTML 2019年 6月 27日
Application note Minimizing System Down-time with Smart eFuses 2019年 6月 12日
EVM User's guide TPS16630-32EVM Evaluation Module for TPS1663x (Rev. A) 2019年 3月 21日
Application note Basics of eFuses (Rev. A) 2018年 4月 5日
Application note Power Multiplexing Using Load Switches and eFuses (Rev. A) 2017年 6月 20日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS16630-32EVM — TPS1663x eFuse 評估模組

The TPS16630-32EVM allows reference circuit evaluation of TI's TPS1663x eFuse. The TPS1663X devices are 4.5V - 60V, 6A Industrial eFuse with integrated FET, programmable under voltage, over voltage, over current and inrush current protection features.

使用指南: PDF
TI.com 無法提供
開發板

TPS2663-166EVM — 採用 PWP 封裝且適用於 TPS26633 和 TPS16630 eFuse 的評估模組

TPS2663-166EVM 可對 TI 的 TPS26633 和 TPS16630 eFuse 進行參考電路評估。TPS26633 和 TPS16630 裝置為具有整合式 31mOhm FET 的 4.5V-60V、6A eFuse。

使用指南: PDF
TI.com 無法提供
模擬型號

TPS1663 PSpice Transient Model

SLVMD04.ZIP (303 KB) - PSpice Model
下載
計算工具

SLVC765 — TPS2663 Design Calculator

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
TPS1663 — 具有輸出功率限制的 4.5V 至 60V、31mΩ、0.6-6A eFuse TPS2663 — 具有輸出功率限制和突波保護功能的 4.5V 至 60V、31mΩ、0.6A 至 6A eFuse
下載
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體

支援產品和硬體

此設計資源支援此類別中多數產品。

檢查產品詳細資料頁面以確認支援。
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 20 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片