首頁 交換器與多工器 類比交換器與多工器 通訊協定與匯流排開關與多工器
首頁
交換器與多工器
類比交換器與多工器
通訊協定與匯流排開關與多工器

TS3A27518E-Q1

現行

具 1.8-V 相容控制輸入的汽車 3.3-V、2:1 (SPDT)、6 通道類比多工器

立即訂購
產品規格表

TS3A27518E-Q1

現行
產品規格表 立即訂購

產品詳細資料

Protocols Analog, SPI Configuration 2:1 SPDT Number of channels 6 Bandwidth (MHz) 240 Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 1.65 Ron (typ) (mΩ) 4400 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Supply current (typ) (µA) 0.01 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 105 ESD CDM (kV) 0.75 Input/output continuous current (max) (mA) 50 COFF (typ) (pF) 13 CON (typ) (pF) 21.5 OFF-state leakage current (max) (µA) 7 Ron (max) (mΩ) 16300 VIH (min) (V) 1 VIL (max) (V) 0.65 Rating Automotive
Protocols Analog, SPI Configuration 2:1 SPDT Number of channels 6 Bandwidth (MHz) 240 Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 1.65 Ron (typ) (mΩ) 4400 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Supply current (typ) (µA) 0.01 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 105 ESD CDM (kV) 0.75 Input/output continuous current (max) (mA) 50 COFF (typ) (pF) 13 CON (typ) (pF) 21.5 OFF-state leakage current (max) (µA) 7 Ron (max) (mΩ) 16300 VIH (min) (V) 1 VIL (max) (V) 0.65 Rating Automotive
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4 WQFN (RTW) 24 16 mm² 4 x 4
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 2: –40°C to 105°C ambient operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C3B
  • Functional Safety-Capable
  • 1.65-V to 3.6-V single-supply operation
  • Powered-off protection (isolation in powerdown mode, Hi-Z when V+ = 0)
  • Low capacitance switches, 21.5 pF (typical)
  • Bandwidth up to 240 MHz for high-speed rail-to-rail signal handling
  • Crosstalk and off isolation of −62 dB
  • 1.8-V logic threshold compatibility for control inputs
  • 3.6-V tolerant control inputs
  • ESD performance: NC/NO ports
    • ±6-kV contact discharge (IEC 61000-4-2)
  • 24-pin TSSOP (7.80 mm × 4.40 mm) and 24-pin QFN (4.00 mm × 4.00 mm) package
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 2: –40°C to 105°C ambient operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C3B
  • Functional Safety-Capable
  • 1.65-V to 3.6-V single-supply operation
  • Powered-off protection (isolation in powerdown mode, Hi-Z when V+ = 0)
  • Low capacitance switches, 21.5 pF (typical)
  • Bandwidth up to 240 MHz for high-speed rail-to-rail signal handling
  • Crosstalk and off isolation of −62 dB
  • 1.8-V logic threshold compatibility for control inputs
  • 3.6-V tolerant control inputs
  • ESD performance: NC/NO ports
    • ±6-kV contact discharge (IEC 61000-4-2)
  • 24-pin TSSOP (7.80 mm × 4.40 mm) and 24-pin QFN (4.00 mm × 4.00 mm) package

The TS3A27518E-Q1 is a 6-bit 1-of-2 multiplexer-demultiplexer designed to operate from 1.65 V to 3.6 V. This device can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction. The TS3A27518E-Q1 has two control pins, each controlling three 1-of-2 muxes at the same time, and an enable pin that is used to put all outputs in high-impedance mode. The control pins are compatible with 1.8-V logic thresholds and are backward compatible with 2.5-V and 3.3-V logic thresholds as well.

The TS3A27518E-Q1 allows any SD, SDIO, and multimedia card host controllers to be expanded out to multiple cards or peripherals because the SDIO interface consists of 6-bits: CMD, CLK, and Data[0:3] signals. The TS3A27518E-Q1 has two control pins that give additional flexibility to the user, for example, the ability to mux two different audio-video signals in equipment such as an LCD television, an LCD monitor, or a notebook docking station.

The TS3A27518E-Q1 is a 6-bit 1-of-2 multiplexer-demultiplexer designed to operate from 1.65 V to 3.6 V. This device can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction. The TS3A27518E-Q1 has two control pins, each controlling three 1-of-2 muxes at the same time, and an enable pin that is used to put all outputs in high-impedance mode. The control pins are compatible with 1.8-V logic thresholds and are backward compatible with 2.5-V and 3.3-V logic thresholds as well.

The TS3A27518E-Q1 allows any SD, SDIO, and multimedia card host controllers to be expanded out to multiple cards or peripherals because the SDIO interface consists of 6-bits: CMD, CLK, and Data[0:3] signals. The TS3A27518E-Q1 has two control pins that give additional flexibility to the user, for example, the ability to mux two different audio-video signals in equipment such as an LCD television, an LCD monitor, or a notebook docking station.
filter 尋找其它 通訊協定與匯流排開關與多工器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
重要文件 類型 標題 格式選項 日期
* Data sheet TS3A27518E-Q1 6-bit, 1-of-2 Multiplexer or Demultiplexer With Integrated IEC L-4 ESD and 1.8-V Logic Compatible Control Inputs datasheet (Rev. D) PDF | HTML 2022年 10月 3日
Product overview How to Communicate I2S Signals Between MCU, DSPs, & Amplifiers Using Multiplexer (Rev. A) PDF | HTML 2023年 6月 23日
Functional safety information TS3A27518E-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2022年 9月 28日
Application note Selecting the Correct Texas Instruments Signal Switch (Rev. E) PDF | HTML 2022年 6月 2日
Application note Multiplexers and Signal Switches Glossary (Rev. B) PDF | HTML 2021年 12月 1日
Application brief Enabling SPI-Based Flash Memory Expansion by Using Multiplexers (Rev. B) PDF | HTML 2021年 10月 7日
Application brief Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C) PDF | HTML 2021年 1月 6日
More literature Automotive Logic Devices Brochure 2014年 8月 27日
Application note Preventing Excess Power Consumption on Analog Switches 2008年 7月 3日
Application note Semiconductor Packing Material Electrostatic Discharge (ESD) Protection 2004年 7月 8日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

介面轉接器

LEADED-ADAPTER1 — 適用於快速測試 TI 的 5、8、10、16 及 24 針腳引線封裝的表面貼裝至 DIP 接頭適配器

EVM-LEADED1 板可用於快速測試和搭建 TI 常見的有引腳封裝  此電路板具備板上配置，可將 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面黏著封裝轉換為 100mil DIP 排針。     

使用指南: PDF
TI.com 無法提供
模擬型號

HSPICE Model for TS3A27518

SCDM129.ZIP (126 KB) - HSpice Model
下載
模擬型號

TS3A27518 IBIS Model

SCDM128.ZIP (101 KB) - IBIS Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 24 Ultra Librarian
WQFN (RTW) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片