DRV2605LEVM-MD

DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback

DRV2605LEVM-MD

Order now

Overview

The DRV2605LEVM-MD evaluation module demonstrates the use of up to eight DRV2605L ERM and LRA drivers for applications that require multiple actuators for either localized and/or strong haptic feedback. The module includes eight DRV2605L ERM and LRA haptic drivers with an embedded waveform library pre-licensed from Immersion, USB control software for Windows, a programmable MSP430F5510, I²C switch (TCA9548), and GPIO expander. The I²C switch and GPIO expander allow for independent control of each of the eight drivers, or synchronized control of a combination of drivers.

The DRV2605LEVM-MD can be used for quick prototyping and integration into any system. Configure the board using the included USB control software for Windows or operate it in standalone mode by using the on-board capacitive touch buttons or the I²C header interface and an external host processor.

Features

Quick prototyping for localized haptic feedback applications
Operate multiple actuators simultaneously to create stronger vibration feedback
Contains 8x DRV2605L ERM and LRA Haptic Drivers with embedded waveform library
Independent or synchronized control of the eight DRV2605L drivers
Standalone or USB software configuration and operating modes

Haptic motor drivers

DRV2605L — Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking

Download View video with transcript Video

Order & start development

Explore packages of hardware, software and documentation

Develop with DRV2605L

See hardware, software, and design resources for evaluating the DRV2605L Haptic driver for ERM/LRA.

Evaluation board

DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit

Required

Why do I need this?

This reference design for your DRV2605/L ERM and LRA haptics driver has Smart Loop Algorithm, RAM for waveform storage, and adds extended actuator support for ERMs and LRAs.

Not available on TI.com

Evaluation board

DRV2605LDGSEVM-M — DRV2605LDGSEVM-M Haptics and Touch Feedback with Immersion Library Breakout Board

Optional

Why do I need this?

This breakout board for your DRV2605L Haptic Driver (MSOP) has Smart Loop Algorithm, embedded TouchSense 2200(TM) effects library licensed from Immersion, and adds extended actuator support for ERM and LRAs.

Not available on TI.com

Evaluation board

DRV2605LEVM-MD — DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback

Optional

Why do I need this?

This evaluation module allows you to use up to eight DRV2605L ERM and LRA drivers for applications that require multiple actuators for either localized and/or strong haptic feedback.

Not available on TI.com

Development kit

CAPTIVATE-PHONE — Capacitive touch mutual capacitance sensor demonstration board with haptic feedback

Optional

Why do I need this?

This is an evaluation platform for mutual capacitance capacitive touch sensors. It provides you with haptic feedback using the TI DRV2605L haptic driver with integrated effects libraries.

Not available on TI.com

Evaluation board

USB2ANY — USB2ANY interface adapter

Required if

Using EVM module.

Why do I need this?

The USB2ANY interface adapter is a tool intended to allow a computer to control an evaluation module (EVM) via a USB connection.

Not available on TI.com

GUI for evaluation module (EVM)

HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

Required

Why do I need this?

This Haptic Control Console is an evaluation and development suite for TI Haptic Drivers to help you setup, control and evaluate the entire device ERM or LRA.

Supported products & hardware

Download

HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

Latest version

Version: 01.00.00.0D

Release date: 28 Jul 2020

open-in-new

View all versions

lock

Haptic Control Console v1.6.0.2 (zip) — 5610 K

Checksum

lock

= Requires export approval (1 minute)

Products

Piezo drivers

DRV2667 — Haptic driver for piezo with integrated 105-V boost converter, waveform memory & DAC

Haptic motor drivers

DRV2510-Q1 — Automotive 3A haptic driver for solenoids with integrated diagnostics and load-dump protection

DRV2511-Q1 — Automotive 8A haptic driver for solenoids with integrated fault-protection

DRV2604 — Haptic driver for ERM/LRA with waveform memory & auto-resonance tracking

DRV2604L — Haptic driver for ERM/LRA with 2-V operation, waveform memory & auto-resonance tracking

DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking

DRV2605L — Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking

DRV2624 — Haptic driver for ERM/LRA with waveform memory, auto-resonance tracking, & low power consumption

DRV2625 — Haptic driver for ERM/LRA with waveform library, auto-resonance tracking, & low power consumption

Hardware development

Evaluation board

DRV-ACC16-EVM — Haptic accelerometer measurement tool

DRV2510Q1EVM — DRV2510-Q1 Automotive Haptic Driver for Solenoids with Integrated Diagnostics Evaluation Module

DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module

DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture

DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board

DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit

DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library

DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit

DRV2605LEVM-MD — DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback

DRV2624EVM-CT — DRV2624 evaluation board with capacitive touch

DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics

DRV2625EVM-CT — DRV2625 Evaluation Board with Bluetooth and Capacitive Touch

DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics

DRV2667EVM-CT — EVM for Piezo Haptic Driver with Boost, Digital Front End, and Internal Waveform Memory

LM48560TLEVAL — High Voltage Class H Ceramic Speaker Driver with Automatic Level Control

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sloc332 or www.ti.com/lit/xx/sloc332d/sloc332d.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC332. Please update any bookmarks accordingly.

Firmware

SLOC340 — DRV-USB-COM Board Firmware

Optional

Why do I need this?

This is the DRV-USB-COM board firmware.

Supported products & hardware

Download

SLOC340 — DRV-USB-COM Board Firmware

Latest version

Version: 01.00.00.00

Release date: 17 Aug 2016

open-in-new

View all versions

download

DRV-USB-COM Board Firmware (zip) — 591 K