TI does not offer ongoing direct design support for this hardware. For support while working through your design, contact e-con Systems Inc..
ECON-3P-ECAM
Overview
The e-CAMxx_CUTDA4 is family of camera module evaluation kits from e-con Systems that is compatible with the SK-TDA4VM starter kit evaluation module (EVM). This embedded camera solution is designed with an aim to provide a complete vision solution for product developers building edge AI embedded vision systems.
While the e-CAM family is designed for SK-TDA4VM, it is also compatible with SK-AM62B-P1 and other processor EVMs with a standard 15-pin FFC connector, or a 22-pin connector with adapter cable (sold separately). Additional software integration may be required.
Each camera PCB stack-up has an image sensor PCB and an appropriate mounted lens in addition to an adapter PCB for supplying power and converting the connector style to the standard 15-pin FFC connector.
Features
- 30-mm × 30-mm PCB size, 24.4-mm pitch for mounting holes
- 15-pin standard FFC connector type, 2-lane CSI
- MIPI-CSI2 interface, I2C communication
- Bare PCB, M12 S-mount with 128.2-degree FOV lens installed
- Power delivered through FFC at 3.3 V
- AR0234CS image sensor with Linux driver and on-board ISP
- V4L2 Linux driver, gstreamer supported by e-con Systems
Photos courtesy of e-con Systems Inc.
Order & start development
Optical module
E-CAM20-CUTDA4 — AR0234 2.3-MP global shutter evaluation kit with 15-pin FFC, based on e-CAM217_CUMI0234_MOD module
Optical module
E-CAM50-CUTDA4 — AR0521 5-MP rolling shutter evaluation kit with 15-pin FFC, based on e-CAM55_CUMI0521_MOD module
Evaluation board
J721EXSKG01EVM
— TDA4VM processor starter kit for edge AI vision systems
Not available on TI.com
Related design resources
Hardware development
EVALUATION BOARD
Support & training
Video series
View all videosVideos
Disclaimer
Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.