DRV8329AEVM

DRV8329A evaluation module for three-phase BLDC gate driver

DRV8329AEVM

Order now

Overview

The DRV8329AEVM is a 30-A, 3-phase brushless DC drive stage based on the DRV8329A gate driver for BLDC motors. The DRV8329 incorporates three diodes for bootstrap operation without the need for external diodes. The device includes a current shunt amplifier for low-side current measurement, 80-mA LDO, dead time control pin, VDS overcurrent level pin, and gaet driver shutoff pin. The EVM includes switches, potentiometers, and resistors to evaluate these settings as well as configurability for the A variant (6x PWM) and B variant (3x PWM) of the DRV8329 device.

Up to 60 V can be supplied to the EVM, and the DRV8329's integrated LDO generates the gate voltage needed for the bootstrap GVDD supply. Status LEDs for all power supplies as well as a Fault LED are included for user feedback. The C2000 launchpad (LAUNCHXL-F280049C) is required for this kit and is used to control the DRV8329AEVM with a sensored trapezoidal algorithm, as well as to monitor and report faults.

Features

4.5 - 60 V operation, 30-A peak H-bridge output current

  • Onboard shunt for combined low-side source current measurement
  • Configurability for A and B variants of the DRV8329
  • Switches, resistors, and potentiometers for speed, dead time, VDSLVL, and gate driver shutoff control
  • Supply LEDs and Fault LEDs for user feedback
  • C2000 (LAUNCHXL-F280049C) sensored trapezoidal firmware and GUI available
BLDC drivers
DRV8329 60V three-phase gate driver with single current-sense amplifier DRV8329-Q1 Automotive 60V three-phase gate driver with single current-sense amplifier
Download View video with transcript Video

Order & start development

Evaluation board

DRV8329AEVM — DRV8329A three-phase BLDC gate driver evaluation module

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
Getting started

MSP-MOTOR-CONTROL — MSP firmware solutions for motor control

Supported products & hardware
Download options

MSP-MOTOR-CONTROL MSP firmware solutions for motor control

close
Latest version
Version: 2.2.0
Release date: 29 Aug 2024

Sensorless FOC firmware for MSPM0Gx5xx + Motor Driver solutions

Hall Sensor Based FOC firmware for MSPM0Gx5xx + Motor Driver solutions

Checksum

BLDC sensored trap firmware for MSPM0G + DRV83xx motor drivers

BLDC sensored trap firmware for MSPM0L + DRV83xx motor drivers

download Stepper Firmware (MSPM0L)  — 0 K

Stepper motor firmware for MSPM0L + DRV8xxx motor drivers

download Brushed-DC Firmware (MSPM0L)  — 0 K

Brushed-DC firmware for MSPM0L + DRV8xxx motor drivers

Products
Arm Cortex-M0+ MCUs
MSPM0G1105 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2×12bit 4Msps ADC, op-amp MSPM0G1106 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp MSPM0G1107 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp MSPM0G1505 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHACL MSPM0G1506 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHACL MSPM0G1507 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHAC MSPM0G3105 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3105-Q1 Automotive 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3106 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3106-Q1 Automotive 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3107 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3107-Q1 Automotive 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3505 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MAT MSPM0G3505-Q1 Automotive 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHACL MSPM0G3506 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHAC MSPM0G3506-Q1 Automotive 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHACL MSPM0G3507 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHA MSPM0G3507-Q1 Automotive 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHAC MSPM0L1303 32-MHz Arm® Cortex®-M0+ MCU with 8-KB flash, 2-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1304 32-MHz Arm® Cortex®-M0+ MCU with 16-KB flash, 2-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1304-Q1 Automotive 32-Mhz Arm® Cortex®-M0+ with 16-KB flash, 2-KB RAM, 12-bit ADC,OPA, LIN MSPM0L1305 32-MHz Arm® Cortex®-M0+ MCU with 32-KB flash, 4-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1305-Q1 Automotive 32-Mhz Arm® Cortex®-M0+ with 32-KB flash, 4-KB RAM, 12-bit ADC, OPA, LIN MSPM0L1306 32-MHz Arm® Cortex®-M0+ MCU with 64-KB flash, 4-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1306-Q1 Automotive 32-Mhz Arm® Cortex®-M0+ with 64-KB flash, 4-KB RAM, 12-bit ADC, OPA,LIN MSPM0L1343 32-MHz Arm® Cortex®-M0+ MCU with 8-KB flash, 2-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1344 32-MHz Arm® Cortex®-M0+ MCU with 16-KB flash, 2-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1345 32-MHz Arm® Cortex®-M0+ MCU with 32-KB flash, 4-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1346 32-MHz Arm® Cortex®-M0+ MCU with 64-KB flash, 4-KB SRAM, 12-bit ADC, comparator, TIA
BLDC drivers
DRV8300 100-V max simple 3-phase gate driver with bootstrap diodes DRV8300-Q1 Automotive 100-V max simple 3-phase gate driver with bootstrap diodes DRV8300U 100-V max, simple three-phase gate driver with bootstrap diodes and enhanced UVLO protection DRV8311 24-V abs max, 3 to 20-V, three-phase brushless-DC motor driver with integrated FETs DRV8316 40-V max 8-A peak 3-phase motor driver with integrated current sensing and integrated FETs DRV8316-Q1 Automotive 40-V max 8-A peak three-phase motor driver with integrated current sensing DRV8316C-Q1 Automotive 40-V max 8-A peak three-phase motor driver with integrated current sensing DRV8317 24-V max 5-A peak three-phase motor driver with integrated FETs and current sensing DRV8323 65-V max 3-phase smart gate driver with current shunt amplifiers DRV8323R 65-V max 3-phase smart gate driver with buck regulator & current shunt amplifiers DRV8328 60 V 1000/2000 mA 3-phase gate driver DRV8329 60V three-phase gate driver with single current-sense amplifier DRV8353 102-V max 3-phase smart gate driver with current shunt amplifiers DRV8353F 102-V max 3-phase Functional Safety Quality-Managed smart gate driver with 3x CSA DRV8353R 102-V max 3-phase smart gate driver with buck regulator & current shunt amplifiers
Stepper motor drivers
DRV8411A 1.65-V to 11-V, 4-A dual H-bridge motor driver with IPROPI current regulation DRV8889-Q1 Automotive, 50-V, 1.5-A, bipolar stepper motor driver w/integrated current sensing & stall detection
Brushed DC (BDC) motor drivers
DRV8706-Q1 Automotive 40-V H-bridge smart gate driver with offline diagnostics & inline current sense am
Hardware development
Evaluation board
BOOSTXL-DRV8323RH DRV8323RH Three-Phase Smart Gate Driver With Buck, Shunt Amps (Hardware Interface) Evaluation Module BOOSTXL-DRV8323RS DRV8323RS three-phase smart gate driver with buck, shunt amps (SPI interface) evaluation module DRV8300DIPW-EVM DRV8300DIPW evaluation module for three-phase BLDC DRV8300DRGE-EVM DRV8300DRGE three phase BLDC evaluation module DRV8311HEVM DRV8311H three-phase PWM motor driver evaluation module DRV8316REVM DRV8316R three-phase PWM motor driver evaluation module DRV8317HEVM DRV8317 evaluation module for three-phase brushless DC (BLDC) gate driver DRV8328AEVM DRV8328A three-phase PWM motor driver evaluation module DRV8329AEVM DRV8329A evaluation module for three-phase BLDC gate driver DRV8353RH-EVM DRV8353RH evaluation module, three-phase brushless DC smart gate driver DRV8353RS-EVM DRV8353RS evaluation module, three-phase brushless DC smart gate driver  DRV8411AEVM DRV8411A evaluation module for dual H-bridge motor driver with current regulation DRV8706S-Q1EVM Automotive H-bridge smart gate driver EVM with wide common mode current sense amplifier DRV8889-Q1EVM DRV8889-Q1 automotive stepper driver with 1/256 microstepping and stall detection evaluation module LP-MSPM0G3507 MSPM0G3507 LaunchPad™ development kit for 80-MHz Arm® Cortex®-M0+ MCU LP-MSPM0L1306 MSPM0L1306 LaunchPad™ development kit for 32-MHz Arm® Cortex®-M0+ MCU

Release Infomation

MSP Motor Control is a collection of software, tools, and examples to spin motors in 30 minutes or less with MSPM0 Arm Cortex M0+ MCUs and popular motor driver solutions. 

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and 3-phase motors with sensored and sensorless control algorithms optimized for performance, integration, and ease-of-use. Spin your motor today by ordering hardware, connecting a motor, and using our Graphical User Interfaces or online code examples.

MSP Motor Control includes:

  • Complete software and evaluation ecosystem for MSPM0 MCU motor control applications inside MSPM0-SDK
  • Support for brushed, stepper, and 3-phase motors with sensored and sensorless algorithms using MSPM0L/MSPM0G devices
  • Getting started collateral to spin a motor in 30 minutes or less optimized for efficiency, power delivery, or speed/torque control 
  • Solutions for field-oriented control (FOC) with a comprehensive suite of features optimized for motor performance
  • Hardware support for reference designs, MSPM0 LaunchPads and TI's portfolio of DRV8xxx motor drivers
  • Future support for code-free GUI-based motor control, communication interfaces, and automatic tuning

 

What's new

  • Hall Sensor Based FOC and Sensorless Field Oriented Control.
  • Support for BLDC & PMSM motors in Three Shunt, Two Shunt and Single Shunt Configurations
  • Initial Speed detection and Initial Position detection feature support
  • Configurable Start up and Stop options to meet wide range of application needs.
  • Dead Time Compensation for best acoustic performance at lower Motor speeds.
  • Maximum Torque Per Ampere algorithm for efficiently driving Salient PMSM Motors
  • Field Weakening to spin the motors beyond the Rated Speeds.
  • Speed Control, Power Control, Torque Control and Voltage Control modes.
  • Evaluation Motor Control GUI to quickly Tune and Test your motors.
Support software

SLVC833 — DRV8329AEVM Sensored Trapezoidal Firmware

Supported products & hardware
Download

SLVC833 DRV8329AEVM Sensored Trapezoidal Firmware

close
Latest version
Version: 01.00.00.00
Release date: 20 Mar 2022

Checksum
Hardware development
Evaluation board
DRV8329AEVM DRV8329A evaluation module for three-phase BLDC gate driver

Release Infomation

The design resource accessed as www.ti.com/lit/zip/slvc833 or www.ti.com/lit/xx/slvc833/slvc833.zip has been migrated to a new user experience at www.ti.com/tool/download/SLVC833. Please update any bookmarks accordingly.
GUI for evaluation module (EVM)

DRV8329B-EVM-GUI — DRV8329B EVM GUI. Spins motor using sensored trapezoidal commutation. Supports B variant only.

Supported products & hardware

DRV8329B-EVM-GUI DRV8329B EVM GUI. Spins motor using sensored trapezoidal commutation. Supports B variant only.

close
Latest version
Version: 1.0.0
Release date: 30 Jun 2022
Hardware development
Evaluation board
DRV8329AEVM DRV8329A evaluation module for three-phase BLDC gate driver LAUNCHXL-F280049C F280049C LaunchPad™ development kit C2000™ Piccolo™ MCU

Release Infomation

DRV8329B EVM GUI. Spins motor using sensored trapezoidal commutation. Supports DRV8329B variant only on the EVM. 

GUI for evaluation module (EVM)

DRV8329A-EVM-GUI — DRV8329A EVM GUI. Spins motor using sensored trapezoidal commutation. Supports A variant only.

Supported products & hardware

DRV8329A-EVM-GUI DRV8329A EVM GUI. Spins motor using sensored trapezoidal commutation. Supports A variant only.

close
Latest version
Version: 1.0.0
Release date: 30 Jun 2022
Hardware development
Evaluation board
DRV8329AEVM DRV8329A evaluation module for three-phase BLDC gate driver LAUNCHXL-F280049C F280049C LaunchPad™ development kit C2000™ Piccolo™ MCU

Release Infomation

DRV8329A EVM GUI. Spins motor using sensored trapezoidal commutation. Supports DRV8329A variant only on the EVM. 

TI's Standard Terms and Conditions for Evaluation Items apply.

Design files

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* User guide DRV8329AEVM User's Guide (Rev. A) PDF | HTML 16 Aug 2022
Certificate DRV8329AEVM EU RoHS Declaration of Conformity (DoC) 22 Mar 2022

Related design resources

Hardware development

EVALUATION BOARD
LAUNCHXL-F280049C F280049C LaunchPad™ development kit C2000™ Piccolo™ MCU

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos