SBOSA15B September   2022  – January 2025 TMP1827

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Description (cont.)
  6. 5 Device Comparison
  7. 6 Pin Configuration and Functions
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Electrical Characteristics
    6. 7.6  1-Wire® Interface Timing
    7. 7.7  Security Engine Characteristics
    8. 7.8  EEPROM Characteristics
    9. 7.9  Timing Diagrams
    10. 7.10 Typical Characteristics
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Power Up
      2. 8.3.2  Power Mode Switch
      3. 8.3.3  Bus Pullup Resistor
      4. 8.3.4  Temperature Results
      5. 8.3.5  Temperature Offset
      6. 8.3.6  Temperature Alert
      7. 8.3.7  Standard Device Address
        1. 8.3.7.1 Unique 64-Bit Device Address and ID
      8. 8.3.8  Flexible Device Address
        1. 8.3.8.1 Non-Volatile Short Address
        2. 8.3.8.2 IO Hardware Address
        3. 8.3.8.3 Resistor Address
        4. 8.3.8.4 Combined IO and Resistor Address
      9. 8.3.9  CRC Generation
      10. 8.3.10 Functional Register Map
      11. 8.3.11 User Memory Map
      12. 8.3.12 SHA-256-HMAC Authentication Block
      13. 8.3.13 Bit Communication
        1. 8.3.13.1 Host Write, Device Read
        2. 8.3.13.2 Host Read, Device Write
      14. 8.3.14 Bus Speed
      15. 8.3.15 NIST Traceability
    4. 8.4 Device Functional Modes
      1. 8.4.1 Conversion Modes
        1. 8.4.1.1 Basic One-Shot Conversion Mode
        2. 8.4.1.2 Auto Conversion Mode
        3. 8.4.1.3 Stacked Conversion Mode
        4. 8.4.1.4 Continuous Conversion Mode
      2. 8.4.2 Alert Function
        1. 8.4.2.1 Alert Mode
        2. 8.4.2.2 Comparator Mode
      3. 8.4.3 1-Wire® Interface Communication
        1. 8.4.3.1 Bus Reset Phase
        2. 8.4.3.2 Address Phase
          1. 8.4.3.2.1 READADDR (33h)
          2. 8.4.3.2.2 MATCHADDR (55h)
          3. 8.4.3.2.3 SEARCHADDR (F0h)
          4. 8.4.3.2.4 ALERTSEARCH (ECh)
          5. 8.4.3.2.5 SKIPADDR (CCh)
          6. 8.4.3.2.6 OVD SKIPADDR (3Ch)
          7. 8.4.3.2.7 OVD MATCHADDR (69h)
          8. 8.4.3.2.8 FLEXADDR (0Fh)
        3. 8.4.3.3 Function Phase
          1. 8.4.3.3.1  CONVERTTEMP (44h)
          2. 8.4.3.3.2  WRITE SCRATCHPAD-1 (4Eh)
          3. 8.4.3.3.3  READ SCRATCHPAD-1 (BEh)
          4. 8.4.3.3.4  COPY SCRATCHPAD-1 (48h)
          5. 8.4.3.3.5  WRITE SCRATCHPAD-2 (0Fh)
          6. 8.4.3.3.6  READ SCRATCHPAD-2 (AAh)
          7. 8.4.3.3.7  COPY SCRATCHPAD-2 (55h)
          8. 8.4.3.3.8  READ EEPROM (F0h)
          9. 8.4.3.3.9  GPIO WRITE (A5h)
          10. 8.4.3.3.10 GPIO READ (F5h)
      4. 8.4.4 NVM Operations
        1. 8.4.4.1 Programming User Data
        2. 8.4.4.2 Register and Memory Protection
          1. 8.4.4.2.1 Scratchpad-1 Register Protection
          2. 8.4.4.2.2 User Memory Protection
    5. 8.5 Programming
      1. 8.5.1 Single Device Temperature Conversion and Read
      2. 8.5.2 Multiple Device Temperature Conversion and Read
      3. 8.5.3 Register Scratchpad-1 Update and Commit
      4. 8.5.4 Single Device EEPROM Programming and Verify
      5. 8.5.5 Single Device EEPROM Page Lock Operation
      6. 8.5.6 Multiple Device IO Read
      7. 8.5.7 Multiple Device IO Write
    6. 8.6 Register Map
      1. 8.6.1  Temperature Result LSB Register (Scratchpad-1 offset = 00h) [reset = 00h]
      2. 8.6.2  Temperature Result MSB Register (Scratchpad-1 offset = 01h) [reset = 00h]
      3. 8.6.3  Status Register (Scratchpad-1 offset = 02h) [reset = 3Ch]
      4. 8.6.4  Device Configuration-1 Register (Scratchpad-1 offset = 04h) [reset = 70h]
      5. 8.6.5  Device Configuration-2 Register (Scratchpad-1 offset = 05h) [reset = 80h]
      6. 8.6.6  Short Address Register (Scratchpad-1 offset = 06h) [reset = 00h]
      7. 8.6.7  Temperature Alert Low LSB Register (Scratchpad-1 offset = 08h) [reset = 00h]
      8. 8.6.8  Temperature Alert Low MSB Register (Scratchpad-1 offset = 09h) [reset = 00h]
      9. 8.6.9  Temperature Alert High LSB Register (Scratchpad-1 offset = 0Ah) [reset = F0h]
      10. 8.6.10 Temperature Alert High MSB Register (Scratchpad-1 offset = 0Bh) [reset = 07h]
      11. 8.6.11 Temperature Offset LSB Register (Scratchpad-1 offset = 0Ch) [reset = 00h]
      12. 8.6.12 Temperature Offset MSB Register (Scratchpad-1 offset = 0Dh) [reset = 00h]
      13. 8.6.13 IO Read Register [reset = F0h]
      14. 8.6.14 IO Configuration Register [reset = 00h]
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 Bus Powered Application
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
      2. 9.2.2 Supply Powered Application
        1. 9.2.2.1 Design Requirements
        2. 9.2.2.2 Detailed Design Procedure
      3. 9.2.3 UART Interface for Communication
        1. 9.2.3.1 Design Requirements
        2. 9.2.3.2 Detailed Design Procedure
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.4.3.1 Bus Reset Phase

The bus reset phase is the beginning of the communication. The phase is initiated by the host by holding the 1-Wire® data line low for a period tRSTL. All devices on the bus, irrespective of the current state shall respond to the bus reset, by reinitializing the internal state and responding to the host initiated bus reset. The devices respond after a minimum of tPDH, by holding the 1-Wire® low for a time period of tRSTH as shown in Figure 7-1.

All devices when powered up are configured with the OD_EN bit set as '1' in the device configuration-2 and OD flag set as '1' in status register. If the host sends a bus reset pulse of 48 µs to 80 µs, then only devices operating in overdrive speed shall respond to the bus reset pulse, while devices operating in standard mode shall continue to wait for a standard mode bus reset.

If the host sends a bus reset pulse of minimum tRSTL for standard mode, the device shall reset the OD_EN bit to '0' and respond to the bus reset in standard mode. If the bus consists of mixed standard and overdrive speed devices, then sending a bus reset pulse in standard mode shall reset all devices to standard mode speed of operation.

Sending the bus reset for a particular speed of operation and then communicating at the other speed mode is illegal for the host. Also, if a bus reset pulse is sent which is greater than 80 µs (but less than 480 µs), then the device communication is reset, though the device operation is not ensured.