JAJSB16C May   2010  – May 2016 DS92LV2421 , DS92LV2422

PRODUCTION DATA.  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
  4. 4 改訂履歴
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics - Serializer DC
    6. 6.6  Electrical Characteristics - Deserializer DC
    7. 6.7  Electrical Characteristics - DC and AC Serial Control Bus
    8. 6.8  Timing Requirements - DC and AC Serial Control Bus
    9. 6.9  Timing Requirements - Serializer for CLKIN
    10. 6.10 Timing Requirements - Serial Control Bus
    11. 6.11 Switching Characteristics - Serializer
    12. 6.12 Switching Characteristics - Deserializer
    13. 6.13 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagrams
    3. 7.3 Feature Description
      1. 7.3.1 Data Transfer
      2. 7.3.2 Video Control Signal Filter - Serializer and Deserializer
      3. 7.3.3 Serializer Functional Description
        1. 7.3.3.1 EMI Reduction Features
          1. 7.3.3.1.1 Data Randomization and Scrambling
          2. 7.3.3.1.2 Serializer Spread Spectrum Compatibility
        2. 7.3.3.2 Signal Quality Enhancers
          1. 7.3.3.2.1 Serializer VOD Select (VODSEL)
          2. 7.3.3.2.2 Serializer De-Emphasis (De-Emph)
        3. 7.3.3.3 Power-Saving Features
          1. 7.3.3.3.1 Serializer Power-Down Feature (PDB)
          2. 7.3.3.3.2 Serializer Stop Clock Feature
          3. 7.3.3.3.3 1.8-V or 3.3-V VDDIO Operation
          4. 7.3.3.3.4 Deserializer Power-Down Feature (PDB)
          5. 7.3.3.3.5 Deserializer Stop Stream SLEEP Feature
        4. 7.3.3.4 Serializer Pixel Clock Edge Select (RFB)
        5. 7.3.3.5 Optional Serial Bus Control
        6. 7.3.3.6 Optional BIST Mode
      4. 7.3.4 Deserializer Functional Description
        1. 7.3.4.1  Signal Quality Enhancers
          1. 7.3.4.1.1 Deserializer Input Equalizer Gain (EQ)
        2. 7.3.4.2  EMI Reduction Features
          1. 7.3.4.2.1 Deserializer Output Slew Rate Select (OS_CLKOUT/OS_DATA)
          2. 7.3.4.2.2 Deserializer Common-Mode Filter Pin (CMF) (Optional)
          3. 7.3.4.2.3 Deserializer SSCG Generation (Optional)
          4. 7.3.4.2.4 1.8-V or 3.3-V VDDIO Operation
        3. 7.3.4.3  Deserializer Clock-Data Recovery Status Flag (LOCK) And Output State Select (OSS_SEL)
        4. 7.3.4.4  Deserializer Oscillator Output (Optional)
        5. 7.3.4.5  Deserializer OP_LOW (Optional)
        6. 7.3.4.6  Deserializer Clock Edge Select (RFB)
        7. 7.3.4.7  Deserializer Control Signal Filter (Optional)
        8. 7.3.4.8  Deserializer Low Frequency Optimization (LF_Mode)
        9. 7.3.4.9  Deserializer Map Select
        10. 7.3.4.10 Deserializer Strap Input Pins
        11. 7.3.4.11 Optional Serial Bus Control
        12. 7.3.4.12 Optional BIST Mode
      5. 7.3.5 Built-In Self Test (BIST)
        1. 7.3.5.1 Sample BIST Sequence
        2. 7.3.5.2 BER Calculations
      6. 7.3.6 Optional Serial Bus Control
    4. 7.4 Device Functional Modes
      1. 7.4.1 Serializer and Deserializer Operating Modes and Reverse Compatibility (CONFIG[1:0])
    5. 7.5 Register Maps
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Display Application
      2. 8.1.2 Live Link Insertion
      3. 8.1.3 Alternate Color / Data Mapping
    2. 8.2 Typical Applications
      1. 8.2.1 DS92LV2421 Typical Connection
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
        3. 8.2.1.3 Application Curve
      2. 8.2.2 DS92LV2422 Typical Connection
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Detailed Design Procedure
        3. 8.2.2.3 Application Curves
  9. 9 Power Supply Recommendations
    1. 9.1 Power-Up Requirements and PDB Pin
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 WQFN (LLP) Stencil Guidelines
      2. 10.1.2 Transmission Media
      3. 10.1.3 LVDS Interconnect Guidelines
    2. 10.2 Layout Example
  11. 11デバイスおよびドキュメントのサポート
    1. 11.1 デバイス・サポート
      1. 11.1.1 デベロッパー・ネットワークの製品に関する免責事項
      2. 11.1.2 開発サポート
    2. 11.2 ドキュメントのサポート
      1. 11.2.1 関連資料
    3. 11.3 関連リンク
    4. 11.4 コミュニティ・リソース
    5. 11.5 商標
    6. 11.6 静電気放電に関する注意事項
    7. 11.7 Glossary
  12. 12メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

8 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality.

8.1 Application Information

8.1.1 Display Application

The DS92LV242x chipset is intended for interface between a host (graphics processor) and a display. It supports a 24-bit color depth (RGB888) and up to 1024 x 768 display formats. In a RGB888 application, 24 color bits (D[23:0]), Pixel Clock (CLKIN), and three control bits (C1, C2, C3) are supported across the serial link with CLKIN rates from 10 to 75 MHz. The chipset may also be used in 18-bit color applications. In this application, three to six general-purpose signals may also be sent from host to display.

The deserializer is expected to be placed close to its target device. The interconnect between the deserializer and the target device is typically in the 1 to 3 inch separation range. The input capacitance of the target device is expected to be in the 5 pF to 10 pF range. Take care of the CLKOUT output trace, as this signal is edge sensitive and strobes the data. It is also assumed that the fanout of the deserializer is one. If additional loads need to be driven, a logic buffer or mux device is recommended.

8.1.2 Live Link Insertion

The serializer and deserializer devices support live pluggable applications. The automatic receiver lock to random data plug and go hot insertion capability allows the DS92LV2422 to attain lock to the active data stream during a live insertion event.

8.1.3 Alternate Color / Data Mapping

Color Mapped Data Pin names are provided to specify a recommended mapping for 24-bit color applications. Seven [7] is assumed to be the MSB, and Zero [0] is assumed to be the LSB. While this is recommended, it is not required. When connecting to earlier generations of FPD-Link II serializer and deserializer devices, a color mapping review is recommended to ensure the correct connectivity is obtained. Table 17 provides examples for interfacing to 18-bit applications with or without the video control signals embedded. The DS92LV2422 deserializer provides additional flexibility with the MAP_SEL feature as well.

Table 17. Alternate Color and Data Mapping

18-BIT RGB 18-BIT RGB 24-BIT RGB 2421 PIN NAME 2422 PIN NAME 24-BIT RGB 18-BIT RGB 18-BIT RGB
LSB R0 GP0 R0 DI0 DO0 R0 GP0 LSB R0
R1 GP1 R1 DI1 DO1 R1 GP1 R1
R2 R0 R2 DI2 DO2 R2 R0 R2
R3 R1 R3 DI3 DO3 R3 R1 R3
R4 R2 R4 DI4 DO4 R4 R2 R4
MSB R5 R3 R5 DI5 DO5 R5 R3 MSB R5
LSB G0 R4 R6 DI6 DO6 R6 R4 LSB G0
G1 R5 R7 DI7 DO7 R7 R5 G1
G2 GP2 G0 DI8 DO8 G0 GP2 G2
G3 GP3 G1 DI9 DO9 G1 GP3 G3
G4 G0 G2 DI10 DO10 G2 G0 G4
MSB G5 G1 G3 DI11 DO11 G3 G1 MSB G5
LSB B0 G2 G4 DI12 DO12 G4 G2 LSB0
B1 G3 G5 DI13 DO13 G5 G3 B1
B2 G4 G6 DI14 DO14 G6 G4 B2
B3 G5 G7 DI15 DO15 G7 G5 B3
B4 GP4 B0 DI16 DO16 B0 GP4 B4
MSB B5 GP5 B1 DI17 DO17 B1 GP5 MSB B5
HS B0 B2 DI18 DO18 B2 B0 HS
VS B1 B3 DI19 DO19 B3 B1 VS
DE B2 B4 DI20 DO20 B4 B2 DE
GP0 B3 B5 DI21 DO21 B5 B3 GP0
GP1 B4 B6 DI22 DO22 B6 B4 GP1
GP2 B5 B7 DI23 DO23 B7 B5 GP2
GND HS HS CI1 CO1 HS HS GND
GND VS VS CI2 CO2 VS VS GND
GND DE DE CI3 CO3 DE DE GND
Scenario 3(3) Scenario 2(2) Scenario 1(1) 2421 Pin Name 2422 Pin Name Scenario 1(1) Scenario 2(2) Scenario 3(3)
(1) Scenario 1 supports the 24-bit RGB color mapping, along with the 3 embedded video control signals. This is the native mode for the chipset.
(2) Scenario 2 supports an 18-bit RGB color mapping, 3 embedded video control signals, and up to six general-purpose signals.
(3) Scenario 3 supports an 18-bit RGB color mapping, 3 un-embedded video control signals, and up to three general-purpose signals.

8.2 Typical Applications

8.2.1 DS92LV2421 Typical Connection

Figure 38 shows a typical application of the DS92LV2421 serializer in pin control mode for a 24-bit application. The LVDS outputs require 100-nF AC-coupling capacitors to the line. The line driver includes internal termination. Bypass capacitors are placed near the power supply pins. At a minimum, four 0.1-µF capacitors and a 4.7-µF capacitor must be used for local device bypassing. System GPO (General Purpose Output) signals control the PDB and BISTEN pins. In this application, the RFB pin is tied low to latch data on the falling edge of the CLKIN. The application assumes connection to the companion deserializer (DS92LV2422), and therefore the configuration pins CONFIG[1:0] are also both tied low. In this example, the cable is long, and therefore the VODSEL pin is tied high and a De-Emphasis value is selected by the resistor R1. The interface to the host is with 1.8-V LVCMOS levels, thus the VDDIO pin is connected also to the 1.8-V rail. The optional serial bus control is not used in this example, thus the SCL, SDA, and ID[X] pins are left open. A delay cap is placed on the PDB signal to delay the enabling of the device until power is stable.

DS92LV2421 DS92LV2422 30110144.gif Figure 38. DS92LV2421 Typical Connection Diagram – Pin Control

8.2.1.1 Design Requirements

For this example, Table 18 lists the design parameters.

Table 18. Design Parameters

PARAMETER EXAMPLE VALUE
VDDIO 1.8 V to 3.3 V
VDDL, VDDP, VDDHS, VDDTX 1.8 V
AC-Coupling Capacitor for DOUT± 100 nF

8.2.1.2 Detailed Design Procedure

The DOUT± outputs require 100-nF AC-coupling capacitors to the line. The power supply filter capacitors are placed near the power supply pins. A smaller capacitance capacitor must be located closer to the power supply pins.

The VODSEL pin is tied to VDDIO for the long cable application. The de-emphasis pin may connect a resistor to ground. Refer to Table 3. The PDB and BISTEN pins are assumed to be controlled by a microprocessor. The PDB must remain in a low state until all power supply voltages reach the final voltage. The RFB pin is tied low to latch data on the falling edge of the PCLK and tied high for the rising clock edge. The CONFIG[1:0] pins are set depending on operating modes and backward compatibility. The SCL, SDA, and ID[X] pins are left open when these serial bus control pins are unused. The RES[2:0] pins and DAP must be tied to ground.

8.2.1.3 Application Curve

DS92LV2421 DS92LV2422 Eye_Diagram_at_PCLK_20_MHz.gif Figure 39. Eye Diagram at CLK = 20 MHz

8.2.2 DS92LV2422 Typical Connection

Figure 40 shows a typical application of the DS92LV2422 deserializer in pin or strap control mode for a 24-bit application. The LVDS inputs use 100-nF coupling capacitors to the line, and the receiver provides internal termination. Bypass capacitors are placed near the power supply pins. At a minimum, seven 0.1-µF capacitors and two 4.7-µF capacitors must be used for local device bypassing. System General Purpose Output (GPO) signals control the PDB and the BISTEN pins. In this application, the RFB pin is tied low to strobe the data on the falling edge of the CLKOUT.

Because the device is in pin or strap control mode, four 10-kΩ pullup resistors are used on the parallel output bus to select the desired device features. CONFIG[1:0] is set to 01'b for normal mode with control signal filter enabled, and this is accomplished with the strap pullup on DO23. The receiver input equalizer is also enabled and set to provide 7.5 dB of gain, and this is accomplished with EQ[3:0] set to 1001'b with strap pullups on DO12 and DO15. To reduce parallel bus EMI, the SSCG feature is enabled and set to fmod = CLK/2168 and ±1% with SSC[3:0] set to 0010'b and a strap pullup on DO4. The desired features are set with the use of the four pullup resistors.

The interface to the target display is with 3.3-V LVCMOS levels, thus the VDDIO pin is connected to the 3.3-V rail. The optional serial bus control is not used in this example, thus the SCL, SDA and ID[X] pins are left open. A delay cap is placed on the PDB signal to delay the enabling of the device until power is stable.

DS92LV2421 DS92LV2422 30110145.gif Figure 40. DS92LV2422 Typical Connection Diagram — Pin Control

8.2.2.1 Design Requirements

For this example, Table 19 lists the design parameters.

Table 19. Design Parameters

PARAMETER EXAMPLE VALUE
VDDIO 1.8 V to 3.3 V
VDDL, VDDSC, VDDPR, VDDR,
VDDIR, VDDCMLO		 1.8 V
AC-Coupling Capacitor for DOUT± 100 nF

8.2.2.2 Detailed Design Procedure

The RIN± inputs require 100-nF AC-coupling capacitors to the line. The power supply filter capacitors are placed near the power supply pins. A smaller capacitance capacitor must be placed closer to the power supply pins.

The device has 22 control and configuration pins that are called strap pins. These pins include an internal pulldown. For a high state, use a 10-kΩ resistor pullup to VDDIO.

The PDB and BISTEN pins are assumed to be controlled by a microprocessor. The PDB has to be in a low state until all power supply voltages reach the final voltage. The SCL, SDA, and ID[X] pins are left open when these serial bus control pins are unused.

The RES pin and DAP must be tied to ground.

8.2.2.3 Application Curves

DS92LV2421 DS92LV2422 Eye_Diagram_at_PCLK_45_MHz.gif Figure 41. Eye Diagram at CLK = 45 MHz
DS92LV2421 DS92LV2422 Eye_Diagram_at_PCLK_65_MHz.gif Figure 42. Eye Diagram at CLK = 65 MHz