JAJSTV6 May   2024 TPSM86637 , TPSM86638

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  The Adaptive On-Time Control and PWM Operation
      2. 6.3.2  Mode Selection
        1. 6.3.2.1 FCCM Control and Eco-mode Control
      3. 6.3.3  Soft Start and Prebiased Soft Start
      4. 6.3.4  Enable and Adjusting Undervoltage Lockout
      5. 6.3.5  Output Overcurrent Limit and Undervoltage Protection
      6. 6.3.6  Overvoltage Protection
      7. 6.3.7  UVLO Protection
      8. 6.3.8  Thermal Shutdown
      9. 6.3.9  Output Voltage Discharge
      10. 6.3.10 Power Good
      11. 6.3.11 Large Duty Operation
    4. 6.4 Device Functional Modes
      1. 6.4.1 Standby Operation
      2. 6.4.2 Light Load Operation
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Output Voltage Resistors Selection
        2. 7.2.2.2 Output Filter Selection
        3. 7.2.2.3 Input Capacitor Selection
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
      1. 7.3.1 Application Thermal Considerations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 サード・パーティ製品に関する免責事項
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 ドキュメントの更新通知を受け取る方法
    4. 8.4 サポート・リソース
    5. 8.5 Trademarks
    6. 8.6 静電気放電に関する注意事項
    7. 8.7 用語集
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

5.5 Electrical Characteristics

The electrical ratings specified in this section apply to all specifications in this document unless otherwise noted. These specifications are interpreted as conditions that do not degrade the parametric or functional specifications of the device for the life of the product containing it. Typical values correspond to TJ = 25°C, VIN = 24V. Minimum and maximum limits are based on TJ = –40°C to +150°C, VIN = 4.5V to 28V (unless otherwise noted).
PARAMETERTEST CONDITIONSMINTYPMAXUNIT
SUPPLY CURRENT
IQQuiescent current, operating 1

TJ = 25°C, VEN = 5V, VFB = 0.7V

(TPSM86638)

350

µA

TJ = 25°C, VEN = 5V, VFB = 0.65V

(TPSM86637)

45µA
ISDShutdown supply currentTJ = 25°C, VEN = 0V

3

µA
UVLO
UVLOVIN undervoltage lockoutWake up VIN voltage4.04.24.4V
Shutdown VIN voltage3.53.653.8V
Hysteresis VIN voltage550mV
ENABLE(EN PIN)
IEN_INPUTInput currentVEN = 1.1V1µA
IEN_HYSHysteresis currentVEN = 1.3V

3

µA
VEN_ONEnable thresholdEN rising1.181.26V
VEN_OFFEN falling11.07V
FEEDBACK VOLTAGE
VFBFeedback voltageVOUT = 5V, continuous mode operation, TJ = 25°C0.5940.60.606V
VOUT = 5V, continuous mode operation, TJ = –40°C to 150°C0.5910.60.609V
CURRENT LIMIT
ILS_OCLLow-side MOSFET valley current limit

6

7.2

8.5

A

IHS_OCL

High-side MOSFET peak current limit

12.75

15

17.25

A

INOC

Reverse current limit for FCCM

3

A

DUTY CYCLE and FREQUENCY CONTROL

FSWSwitching frequencyVIN = 24V, VOUT = 5V, continuous mode operation,

Mode setting to 800kHz

800kHz
tON(MIN)Minimum on time2

50

ns
tOFF(MIN)Minimum off time2

TJ = 25°C

150

ns
SOFT START
ISSSoft-start charging current6uA
POWER GOOD
VPGTHPG lower threshold - falling% of VFB85%
PG lower threshold - rising% of VFB

90%

PG upper threshold - falling% of VFB110%
PG upper threshold - rising% of VFB

115%

tPG_DLYPG delayPG from low-to-high64us
PG from high-to-low32us
VOVPOutput OVP thresholdOVP detect(L->H)125%
tOVP_DEGOVP Prop deglitchTJ = 25°C32us
VUVPOutput UVP thresholdHiccup detect(H->L)65%
tUVP_WAITUV protection hiccup wait time256us
tUVP_HICCUPUV protection hiccup time before recovery10.5*tSS
THERMAL SHUTDOWN
Thermal shutdown threshold3Temperature rising

150

165°C
Hysteresis30°C
SW DISCHARGE RESISTANCE
VOUT discharge resistanceVEN = 0, VSW = 0.5V, TJ = 25°C200Ω
(1) Not representative of the total input current of the system when in regulation. Specified by design and characterization test.
(2) Not production tested. Specified by design.
(3) Not production tested. Specified by design and engineering sample correlation.