SLLU303A August   2019  – March 2022 TLIN1028-Q1 , TLIN1028S-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Description
  3. 2EVM Setup and Requirements
    1. 2.1 Commander Mode
    2. 2.2 Responder Mode
    3. 2.3 TXD and RXD
    4. 2.4 VCC Load Testing
    5. 2.5 LED Indication
  4. 3Schematic and Bill of Materials
    1. 3.1 Schematic
    2. 3.2 Bill of Materials
  5. 4Revision History

2.2 Responder Mode

To configure the board for responder mode, remove the shunt on J8 to disconnect the external 1-kΩ resistor and series diode from the LIN bus per the LIN specification.