SLOA227B
October 2015 – March 2019
TRF7964A
,
TRF7964A
,
TRF7970A
,
TRF7970A
NFC/HF RFID reader/writer using the TRF7970A
Trademarks
1
Terms, Definitions, and Symbols
2
Introduction
3
Initial RF Collision
4
TRF7970A Register Settings
5
Reader/Writer Mode
5.1
Technology Activation Using the TRF7970A
5.1.1
ISO14443-3 Type A (Type 2 and Type 4A Tags)
5.1.1.1
Additional Tag Activation Commands for Type 4A Tags
5.1.2
ISO14443B-3 (Type 4B Tags)
5.1.2.1
Selection for Type 4B Tags
5.1.3
ISO18092 (Type 3 Tags)
5.1.4
ISO15693 (Type 5 Tags)
5.2
Tag Memory Format With NDEF Examples
5.2.1
Type 2 Tags
5.2.1.1
Layout
5.2.1.2
NDEF Format
5.2.1.2.1
Static Memory Structure
5.2.1.2.2
Dynamic Memory Structure
5.2.1.3
Capability Container
5.2.2
Type 3 Tags
5.2.2.1
Layout
5.2.2.2
NDEF Format
5.2.2.3
Attribute Information Block
5.2.3
Type 4 Tags
5.2.3.1
Layout
5.2.3.2
NDEF Format
5.2.3.3
Capability Container
5.2.4
Type 5 Tags
5.2.4.1
Layout
5.2.4.2
NDEF Format
5.2.4.3
Capability Container
6
Hardware Description
6.1
LaunchPad™ Development Kit and BoosterPack™ Plug-in Module Setup
6.1.1
BoosterPack Plug-in Module: DLP-7970ABP
6.1.2
LaunchPad Development Kit: MSP-EXP430F5529LP
6.1.3
LaunchPad Development Kit: MSP-EXP432P401R
6.2
Bundle Available for Purchase
7
Reader/Writer Firmware Example
7.1
Reader/Writer APIs
7.2
Implementing a Reader/Writer Sample Application
7.2.1
Low-Level Initialization
Example 1. MCU and TRF7970A Initialization Code Snippet
7.2.2
Reader/Writer NFC Stack Configuration
Example 2. Reader/Writer Stack Configuration Code Snippet
7.2.3
Activation
7.2.4
Reading and Writing Tags
8
Quick Start Guide
9
Operational Overview
10
Reader/Writer Interoperability Results
11
Conclusion
12
References
Revision History
6.1
LaunchPad™ Development Kit and BoosterPack™ Plug-in Module Setup