This application note covers how to setup and configure the DP83867 and DP83869 (further refereed to as DP8386x) PHY for Ethernet Physical Layer Compliance (IEEE802.3). This application note primarily uses DP83867 as an example, but DP83869 can also use these scripts for compliance testing.
While the same 10/100 Mbps testing methodology is used in the exclusive 10/100 Mbps PHYs (DP83822, DP83825, DP83826), please refer to SNLA266 for more detailed procedure specific to those devices.
All trademarks are the property of their respective owners.