DLPU127 December   2023 DLP470NE , DLP480RE , DLP550HE , DLP550JE , DLP650LE , DLP650NE , DLP670RE , DLP780NE , DLP800RE , DLPC4430

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 Other Items Needed for Operation
  8. 2Software
    1. 2.1 Connecting the DMD EVM to the DLPC4430EVM
    2. 2.2 Quick Start
      1. 2.2.1 Downloading the Software
      2. 2.2.2 Powering-up the DLPC4430EVM and Preparing for the DLPC4430EVM to be Programmed
      3. 2.2.3 Programming the DLPC4430EVM and Displaying a SPLASH Image
      4. 2.2.4 JTAG Flash Programming
      5. 2.2.5 Flash Device Parameters
      6. 2.2.6 Troubleshooting
  9. 3Hardware
    1. 3.1 Connections
      1. 3.1.1 DLPC4430EVM Connections
        1. 3.1.1.1 DLPC4430EVM Connectors
        2. 3.1.1.2 DLPC4430EVM Test Points
      2. 3.1.2 DLP780NEEVM/DLP800REEVM Connections
        1. 3.1.2.1 DLP780NEEVM/DLP800REEVM Connectors
        2. 3.1.2.2 DLP780NEEVM/DLP800REEVM Test Points
      3. 3.1.3 DLP470NEEVM/DLP480REEVM Connections
        1. 3.1.3.1 DLP470NEEVM/DLP480REEVM Connectors
        2. 3.1.3.2 DLP470NEEVM/DLP480REEVM Test Points
      4. 3.1.4 DLP550HEEVM/DLP550JEEVM/DLP650LEEVM Connections
        1. 3.1.4.1 DLP550HEEVM/DLP550JEEVM/DLP650LEEVM Connectors
        2. 3.1.4.2 DLP550HEEVM/DLP550JEEVM/DLP650LEEVM Test Points
      5. 3.1.5 DLP650NEEVM/DLP670REEVM Connections
        1. 3.1.5.1 DLP650NEEVM/DLP670REEVM Connectors
        2. 3.1.5.2 DLP650NEEVM/DLP670REEVM Test Points
    2. 3.2 Power Supply Requirements
      1. 3.2.1 External Power Supply Requirements
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 If You Need Assistance
    2. 5.2 Caution Labels
    3.     Trademarks
  12. 6Related Documentation

DLPC4430EVM Connectors

Table 3-1 Connectors
Reference Designator Description Physical Connection Type
J1 Test_I/F Connector
J2 Frontend_I/F

Connector

J3 Fan_5/6_Selection

Jumper selection

J4 Mini-USB Cable
J5 Memory Bus Selection Jumper (short)
J6 Lamp_state Jumper (short)
J7

RS_232_0

Cable
J8 HOLD_BL

Jumper (short)

J9 Red LED enable or Lamp Ballast Jumper selection
J10 Daughter Card I2C Clock Jumper selection
J11 Daughter Card I2C Data Jumper selection
J12 Front-end DSP Power Jumper selection
J13 Front-end Power Jumper selection
J14 Point Blank Dongle (Right Angle) Header
J15 Point Blank Dongle Header
J16 RS_232_1 Cable
J17 MSP430 Communication Cable
J18 PWM SSI Driver I/F Cable
J19 LED Test points Header
J20 Manual Reset Jumper Jumper (short)
J21 Controller Sensor selection Jumper selection
J22 12 V Input Power (Barrel)
J23 ASIC JTAG Cable
J24

Point Blank/IR

Cable

J25

L2F_Sens

Cable

J26

Comp_Sens

Cable

J27

ARM Port

Cable

J28 Test point MUX

Header

J29 Controller Sensor selection (Continued) Jumper selection
J30

AC Ballast

Cable

J31

Low-power Bypass

Jumper (short)

J32

Ext_Power

Cable

J33

SPI_DRV

Cable

J34

Lamp_Control

Jumper (short)

J35

SM_PIC

Cable

J36

Formatter Only I/F

Cable

J37

FAN #4

Cable

J38

FAN #5

Cable

J39

FAN #6

Cable
J40 Blue_LED_EN / Lamp Mode

Jumper selection

J41

LED_EN

Cable
J42 JTAG Boundary Scan Cable
J43

SSI SPI Control

Cable
J44

SSP2/LED_DIN

Jumper selection

J45

Bus_Mode

Jumper (short)

J46 DMD Current Selection Cable
J47 Keyboard Interface Cable
J48 L2F_Sens Cable
J49 SSI SPI Control Cable
J52

D_BLK

Cable
J53

3D_TOG

Cable
J54 ADC Integrating Sensor Board I/F Cable
J55 Colorwheel #2 Index Sensor Cable
J56 Colorwheel #2 motor drive Cable
J57 Colorwheel #1 Index Sensor Cable

J58

Colorwheel #1 motor drive Cable

J59

FAN #1

Cable

J60

FAN #2

Cable

J61

FAN #3

Cable

J62

5 V FAN

Cable

J63

FMC Connector

CableBlue_LED_EN / Lamp Mode