SLUAAM6 November 2022 BQ24190 , BQ24192 , BQ24192I , BQ24195 , BQ24195L , BQ24196 , BQ24292I , BQ24295 , BQ24296 , BQ24297 , BQ24298 , BQ25600 , BQ25600D , BQ25601 , BQ25601D , BQ25606 , BQ25611D , BQ25616 , BQ25618 , BQ25619 , BQ25620 , BQ25622 , BQ25890 , BQ25890H , BQ25892 , BQ25895 , BQ25896 , BQ25898 , BQ25898D
This application report provides a general single-cell charge selection guidance and comparison among BQ2419x, BQ2429x, BQ2589x, BQ25898x, BQ2560x, BQ2561x, and BQ2562x single-cell switching battery charge devices with Narrow Voltage DC (NVDC) Power Path Management. The document presents the main differences and describes the key features of each part. The summary also includes the comparison across various charger product families. This information provided hereby can assist design engineers with making good choices for their single-cell switching battery charging applications.
All trademarks are the property of their respective owners.
Besides the common charger parameters such as the input voltage range, the battery charge voltage limit, the maximum charging current, the package size and so on, a single-cell charger designer needs to consider system-level architecture including but not limit to the input current limit detection scheme, the system control methodology, the system monitoring and protection scheme and boost mode operation.
If the application requires USB D+/D- input current limit detection capability, the user needs to check the related specs of a charger IC. Please visit USB D+ D- Input Current Limit Detection for BQ2419x, BQ2429x, BQ2589x, BQ25898x, BQ2560x, and BQ2561x (USB D+ D- Input Current Limit Detection for BQ2419x, BQ2429x, BQ2589x, BQ25898x, BQ2560x, and BQ2561x application note) for the details.
If the application does not require USB D+/D- input current limit, the user can either leave the D+/D- pins open or short the D+/D- pins together. Below are the general guidelines. Please refer to the corresponding data sheet for the specific input current limit settings
As a battery charger designer, one of the most important questions to consider is the control method for the charging system. Shall a microprocessor-controlled charger or a stand-alone charger be used?
The two most popular control methodologies are:
Table 1-1 lists what can be considered when determining the control method for a charger system.
I2C-controlled | Stand-alone | |
---|---|---|
Need real-time control over the charger? | √ | X |
Need the flexibility of charging parameters? | √ | X |
Need to monitor charging parameter values? | √ | X |
Require a host? | Yes | No |
Require software code? | Yes | No |
To improve battery safety, battery monitoring and protection are important in a charger system. The main job of a charger is to charge the battery. The chargers are essentially power supplies with complex state machines and analog feedback loops. In general, chargers do not offer battery monitoring function and only implement basic battery protection functions such as under-voltage protection, over-voltage protection and over-current protection.
The gauges are micro-controllers using ADCs and digital logic. Although a few chargers offer battery monitoring as an extra feature in addition to regular charger, a gauge makes more accurate voltage, current and temperature measurements compared to that of a charger. For accurate ADC measurements and full-featured battery monitoring function, a gauge is recommended.
For the single-cell switching battery charge devices discussed hereby, most of them support boost mode operations while some chargers provide the boost output at both VBUS and PMID pins (Q1 RBFET is on in boost mode) and some chargers provide the boost output at the PMID pin only (Q1 RBFET is off in boost mode). If an application uses the boost mode operations, the charger designer needs to check which pin needs the boost output in their system.
Table 2-1 shows available stand-alone single-cell switching battery chargers.
BQ25606 | BQ25616 | BQ25616J | |
---|---|---|---|
Quiescent battery current (BAT, SYS, SW) | 58 µA | 9.5 µA | 9.5 µA |
VBUS OVP Reaction-time | 200 ns | 130 ns | 130 ns |
Input voltage regulation accuracy | ±3% | ±2% | ±2% |
TS profile | JEITA | Hot/Cold | JEITA |
Charge safety timer accuracy | 10 hr | 20 hr | 20 hr |
Charge Voltage Limit | 4.2 V/4.35 V/4.4 V | 4.1 V/4.2 V/4.35 V | 4.1 V/4.2 V/4.35 V |
Battery voltage regulation | ±0.5% | ±0.4% | ±0.4% |
ACDRV | No | Yes | Yes |
Both BQ2589x in QFN package and BQ25898x WCSP package are full-featured chargers with battery monitoring function.
Table 3-1 shows device comparison for BQ2589x product family in 4 mm × 4 mm QFN package.
Features | BQ25890 | BQ25892 | BQ25896 | BQ25890H | BQ25895 | BQ25895M |
---|---|---|---|---|---|---|
Max Charge Current | 5 A | 5 A | 3 A | 5 A | 5 A | 5 A |
Boost Mode Output Current | 2.4 A | 2.4 A | 2 A | 2.4 A | 3.1 A | 3.1 A |
USB Detection | D+/D- | PSEL | PSEL | D+/D- | D+/D- | D+/D- |
HVDCP Support | Yes Default Enable | Yes Default Enable | No BC1.2 Only | Yes Default Enable | Yes Default Enable | Yes Default Disable |
Default Battery Voltage | 4.2 V | 4.2 V | 4.2 V | 4.2 V | 4.2 V | 4.35 V |
IR Compensation | Yes | Yes | Yes | Yes | Yes | Yes |
Direct BATSENSE | No | No | No | No | No | No |
Input Control Optimization (ICO) | Yes | Yes | Yes | Yes | Yes | Yes |
I2C Default Input Current Limit | 3.25 A | 3.25 A | 3.25 A | 3.25 A | 3.25 A | 3.25 A |
ILIM Pin | Yes | Yes | Yes | Yes | Yes | Yes |
Default Charge Current | 2 A | 2 A | 2 A | 2 A | 2 A | 2 A |
ADC Battery Monitoring | Yes | Yes | Yes | Yes | Yes | Yes |
QON Full System Reset (QON Pin) | Yes | Yes | Yes | Yes | Yes | Yes |
D+/D- Driver | No | No | No | Yes | No | No |
VOK Driver | No | No | No | No | No | No |
Status Output | STAT | STAT/PG | STAT/PG | STAT | STAT | STAT |
Temperature Profile (TS Pin) | JEITA | JEITA | JEITA | JEITA | JEITA | JEITA |
Package | QFN | QFN | QFN | QFN | QFN | QFN |
I2C Address | 6AH | 6BH | 6BH | 6AH | 6AH | 6AH |
Table 3-2 shows device comparison for BQ25898x product family in 2.8 mm × 2.5 mm WCSP package
Features | BQ25898D | BQ25898 | BQ25898C |
---|---|---|---|
Max Charge Current | 4 A | 4 A | 3 A |
Boost Mode Output Current | 2.4 A | 2.4 A | Not Supported |
USB Detection | D+/D- | PSEL | PSEL |
HVDCP Support |
Yes Default Enable |
Yes Default Enable |
No BC1.2 Only |
MTK-PE+ Support (Autonomous / Software) | Yes (Auto) | Yes (Auto) | Not Supported |
Default Battery Voltage | 4.2 V | 4.2 V | 4.2 V |
IR Compensation | Yes | Yes | No |
Direct BATSENSE | Yes | Yes | Yes |
Input Control Optimization (ICO) | Yes | Yes | No |
I2C Default Input Current Limit | 3.25 A | 3.25 A | 1.5 A |
ILIM Pin | Yes | Yes | No |
Default Charge Current | 2 A | 2 A | Charge Disabled |
ADC | Yes | Yes | Yes |
QON Full System Reset (QON Pin) | Yes | Yes | No |
D+/D- Driver | Yes | No | No |
VOK Driver | No | Yes | No |
Status Output | STAT | STAT/PG | STAT/PG |
Temperature Profile (TS Pin) | JEITA | JEITA | Not Supported |
Package | WCSP | WCSP | WCSP |
I2C Address | 6AH | 6BH | 6BH |
The BQ2419x product family including BQ24292I was initially released around year 2012. BQ2419x, BQ2419x, and BQ2589x are basically pin-compatible.
Features | BQ24190 | BQ24192 | BQ24192I/ BQ24292I | BQ24193 | BQ24196 | BQ24195 | BQ24195L |
---|---|---|---|---|---|---|---|
Temperature Profile | Cold/Hot | Cold/Hot | Cold/Hot | JEITA | Cold/Hot | Cold/Hot | Cold/Hot |
Maximum Charge Current | 4.5 A | 4.5 A | 4.5 A | 4.5 A | 2.5 A | 4.5 A | 2.5 A |
Boost Mode Output Current | 1.3 A | 1.3 A | 1.3 A | 1.3 A | 1.3 A | 2.1 A | 1.0 A |
USB Detection | D+/D- | PSEL | PSEL | PSEL | PSEL | D+/D- | D+/D- |
Default Battery Regulation Voltage | 4.208 V | 4.208 V | 4.112 V | 4.208 V | 4.208 V | 4.208 V | 4.208 V |
IR Compensation | Yes | Yes | Yes | Yes | No | No | No |
Input OVP | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V |
VINDPM Default | 4.36 V | 4.36 V | 4.44V | 4.36 V | 4.36 V | 4.36 V | 4.36 V |
REGN Voltage | 6 V | 6 V | 6 V | 6 V | 6 V | 6 V | 6 V |
Default Adapter Input Current Limit | 1.5 A | 3 A | 1.5 A | 3 A | 3 A | 1.5 A | 1.5 A |
Default Charging Current | 2.048 A | 2.048 A | 1.024A | 2.048 A | 2.048 A | 2.048 A | 2.048 A |
Default Precharging Current | 256 mA | 256 mA | 256 mA | 256 mA | 256 mA | 256 mA | 256 mA |
Maximum Precharging Current | 2.048 A | 2.048 A | 640 mA | 2.048 A | 2.048 A | 2.048 A | 2.048 A |
Status Output | STAT | STAT/PG | STAT/PG | STAT/PG | STAT/PG | STAT | STAT |
STAT pin during fault | Blinking | Blinking | 10k pull down | Blinking | Blinking | Blinking | Blinking |
The BQ2429x product family is a low voltage version of the BQ2419x product family.
Features | BQ24295 | BQ24296 | BQ24297 | BQ24296M | BQ24298 |
---|---|---|---|---|---|
Maximum Charge Current | 3 A | 3 A | 3 A | 3 A | 3 A |
Boost Mode Output Current | 1.5 A | 1.5 A | 1.5 A | 1.5 A | 1.5 A |
USB Detection | D+/D- | PSEL | D+/D- | PSEL | PSEL |
Default Battery Regulation Voltage | 4.208 V | 4.208 V | 4.208 V | 4.208 V | 4.208 V |
Input Current Limits | 100 mA, 150 mA, 500 mA, 900 mA, 1 A, 1.5 A, 2 A, 3 A | 100 mA, 150 mA, 500 mA, 900 mA, 1 A, 1.5 A, 2 A, 3 A | 100 mA, 150 mA, 500 mA, 900 mA, 1 A, 1.5 A, 2 A, 3 A | 100 mA, 150 mA, 500 mA, 900 mA, 1 A, 1.5 A, 2 A, 3 A | 100 mA, 150 mA, 500 mA, 900 mA, 1 A, 1.5 A, 2 A, 3 A |
BATFET Overcurrent Latch off | Yes | Yes | Yes | No | No |
VINDPM Default | 4.76 V | 4.36 V | 4.36 V | 4.36 V | 4.36 V |
Max. VSYS Regulation Voltage | VBAT + 150 mV | VBAT + 150 mV | VBAT + 150 mV | VBAT+ 70 mV | VBAT+ 70 mV |
Default Adapter Input Current Limit | 3 A | 3 A | 3 A | 3 A | 3 A |
Default Precharging Current | 256 mA | 256 mA | 256 mA | 128 mA | 128 mA |
Default Charging Current | 1.012 A | 2.048 A | 2.048 A | 2.048 A | 2.048 A |
Termination Current Range | 128 mA about 2048 mA | 128 mA about 2048 mA | 128 mA about 2048 mA | 128 mA about 1024 mA | 128 mA about 1024 mA |
Status Output | STAT | STAT/PG | STAT | STAT/PG | STAT/PG |
QON | Low to Hi Transition Exit Ship Mode | Low to Hi Transition Exit Ship Mode | Low to Hi Transition Exit Ship Mode | Low to Hi Transition Exit Ship Mode | Hi to Low Transition Exit Ship Mode, System reset |
Force BATFET Off Control (I2C) | Y(Instant-off) | Y(Instant-off) | Y(Instant-off) | Y(Instant-off) | Y (5s-10s delay) |
Package | RGE-24 | RGE-24 | RGE-24 | RGE-24 | RTW-24 |
The BQ2560x and BQ2561x product families are the newer generation of the BQ2419x product family.
Features | BQ25600(D) | BQ25601(D) | BQ25611D | BQ25618/619 |
---|---|---|---|---|
Control interface | I2C | I2C | I2C | I2C |
Input voltage range/ abs max | 3.9 V to 13.5 V / 22 V | 3.9 V to 13.5 V / 22 V | 4 V to 13.5 V / 22 V | 4 V to 13.5 V / 22 V |
OVP /Reaction time | 5.5 V, 6.5 V, 10.5 V, 14 V/ 200 ns | 5.5 V, 6.5 V, 10.5 V, 14 V/ 200 ns | 5.9 V, 6.4 V, 11 V, 14.2 V / 130 ns | 5.9 V, 6.4 V, 11 V, 14.2 V / 130 ns |
Battery only Quiescent Current in Ship mode (typical) | 17 uA with BATFET off | 17 uA with BATFET off | 7 uA with BATFET off | 7 uA with BATFET off |
Battery Only Quiescent Current (typical) | 58 uA with BATFET on | 58 uA with BATFET on | 9.5 uA with BATFET on | 9.5 uA with BATFET on |
USB detection | D+D- / BC1.2 | D+D- / BC1.2 | D+D- / BC1.2 | PSEL |
Charging current max /default | 3 A / 2.04 A | 3 A / 2.04 A | 3 A / 1.02 A | 1.5 A/ 340 mA |
Battery Regulation Voltage | 3.856 V - 4.624 V | 3.847 V - 4.615 V | 3.494 V to 4.510 V | 3.504 V to 4.520V |
Direct BATSENSE | Yes | No | Yes | Yes |
TS JEITA Profile | Fixed JEITA | Fixed JEITA | JEITA with adjustable T2, T3, ICHG% | JEITA with adjustable T2, T3, ICHG% |
TS ignore bit | No | No | Yes | Yes |
Top-off timer | 0(default), 15, 30, 45min | 0(default), 15, 30, 45min | 0(default), 15, 30, 45min | 0(default), 15, 30, 45min |
Safety Timer | 5hr, 10 hr (default) | 5hr, 10 hr (default) | 10 hr (default), 20hr | 10 hr (default), 20hr |
Min Termination current | 60 mA | 60 mA | 60 mA | 20 mA |
Boost Voltage/ Boost Current | 4.85 V/5 V/5.15 V/5.3 V | 4.85 V/5 V/5.15 V/5.3 V | 4.6 V/4.75 V/5 V/5.15 V | 4.6 V/4.75 V/5 V/5.15 V |
1.2 A | 1.2 A | 0.5 A/1.2 A | 0.5 A/1.2 A | |
/QON SYS reset with adapter | No | No | Yes | Yes |
Package Type (mm) | 2 mm × 2.4 mm WCSP | QFN-24 4 mm × 4 mm p2p w/ BQ2419x/BQ2429x/BQ2589x | QFN-24 4 mm × 4 mm p2p w/ BQ2419x/BQ2429x/BQ2589x | QFN-24 4 mm ×4 mm (BQ25619) WCSP 2 mm × 2.4 mm (BQ25618) |
BQ2562x is a newly released product family with enhanced design. Table 7-1 highlighted the difference between the selected BQ2560x/BQ2561x/BQ2562x.
BQ25601D | BQ25611D | BQ25620/622 | |
---|---|---|---|
Input current limit | 3.2 A | 3.2 A | 3.2 A |
Input voltage max/abs max | 13.5 V/22 V | 13.5 V/22 V | 18 V/26 V |
ADC Battery Monitoring | No | No | Yes |
USB Detection | BC1.2 | BC1.2 | 620: BC1.2; 622: ILIM |
Max charge current | 3 A | 3 A | 3.5 A |
Battery only quiescent current with BATFET on (typ) | 58 µA | 9.5 µA | 1.5 µA |
Battery only quiescent current in ship mode with BATFET off (typ) | 17 µA | 7 µA | 0.15 µA |
Battery Voltage | 3.847 V to 4.615 V | 3.494 V to 4.510 V | 3.5 V - 4.8 V (10mV/step) |
Boost mode voltage range | 4.85 V/5 V/5.15 V/5.3 V | 4.6 V/4.75 V/5 V/5.15 V | 3.84 V – 9.6 V |
Boost mode max output current | 1.2 A | 1.2 A | 3.2 A |
Minimum battery voltage to keep BATFET on | 2.2 V | 2.2 V | 1.8 V |
Minimum termination current | 60 mA | 60 mA | 10 mA |
Safety Timer | 5 hr, 10 hr (default) | 10 hr (default), 20hr | 10 hr (default), 20hr |
JEITA Profile | Fixed JEITA | Flexible JEITA | Flexible JEITA with VSET selections |
Package | 4 mm × 4 mm QFN-24 | 4mm × 4 mm QFN-24 | 2.5 mm × 3 mm QFN-18 |
The single cell switching battery charger devices including BQ2419x, BQ2429x, BQ2589x, BQ25898x, BQ2560x, BQ2561x, and BQ2562x are I2C Controlled except BQ25606/616/616J as standalone chargers. Table 8-1 shows the key features for each product family. Please refer to the corresponding data sheets for the details.
Features | BQ2419x | BQ2429x | BQ2589x | BQ25898x | BQ2560x/61x | BQ2562x |
---|---|---|---|---|---|---|
Charger architecture(1) | NVDC | NVDC | NVDC | NVDC | NVDC | NVDC |
Charger Topology | Step-Down | Step-Down | Step-Down | Step-Down | Step-Down | Step-Down |
Input Voltage Range | 3.9 V – 17 V | 3.9 V – 6.2 V | 3.9 V – 14 V | 3.9 V – 14 V | 3.9 V – 13.5V | 3.9 V – 18 V |
Max Charge Current Range | 4.5A except BQ24196 & BQ24195L | 3 A | 5 A except BQ25896 3 A | 4 A except BQ25898C 3 A | 3 A except BQ25618x/619x 1.5 A | 3.5 A |
Boost Mode | Yes | Yes | Yes | Yes | Yes, except BQ25618E/25619E | Yes |
USB Detection | BC1.2 | BC1.2 | BC1.2 + HVDCP | BC1.2 + HVDCP | BC1.2 | BC1.2 + HVDCP |
D+/D- Driver | No | No | Yes | Yes | No | No |
IR Compensation | No | No | Yes | Yes | No | No |
Direct BATSENSE | No | No | No | Yes | Yes for BQ25600/25600D and BQ2561x | No |
Input Control Optimization (ICO) | No | No | Yes | Yes | No | Yes |
ADC Battery Monitoring | No | No | Yes | Yes | No | Yes |
QON Full System Reset (QON Pin) | No | Yes | Yes | Yes | Yes | Yes |
VOK Driver | No | No | Yes | Yes | No | No |
Status Output | STAT | STAT/PG | STAT/PG | STAT | STAT | STAT |
Temperature Profile (TS Pin) | JEITA | JEITA | JEITA | JEITA | JEITA | JEITA |
Package | QFN | QFN | QFN | WCSP | QFN&WCSP | QFN |
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2022, Texas Instruments Incorporated