BUF802

ACTIVE

Wide-bandwidth, 2.3-nV/√Hz, high-input impedance JFET buffer

Product details

Architecture FET / CMOS Input, Fixed Gain/Buffer Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 9 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 13 GBW (typ) (MHz) 3100 BW at Acl (MHz) 3100 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 7000 Vn at flatband (typ) (nV√Hz) 2.3 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 34 Vos (offset voltage at 25°C) (max) (mV) 800 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Integrated Clamps Rating Catalog Operating temperature range (°C) -40 to 85 Input bias current (max) (pA) 25 Offset drift (typ) (µV/°C) 700 Iout (typ) (mA) 15 2nd harmonic (dBc) -55 3rd harmonic (dBc) -59 Frequency of harmonic distortion measurement (MHz) 1000
Architecture FET / CMOS Input, Fixed Gain/Buffer Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 9 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 13 GBW (typ) (MHz) 3100 BW at Acl (MHz) 3100 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 7000 Vn at flatband (typ) (nV√Hz) 2.3 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 34 Vos (offset voltage at 25°C) (max) (mV) 800 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Integrated Clamps Rating Catalog Operating temperature range (°C) -40 to 85 Input bias current (max) (pA) 25 Offset drift (typ) (µV/°C) 700 Iout (typ) (mA) 15 2nd harmonic (dBc) -55 3rd harmonic (dBc) -59 Frequency of harmonic distortion measurement (MHz) 1000
VQFN (RGT) 16 9 mm² 3 x 3
  • Large-signal bandwidth (1 VPP): 3.1 GHz
  • Slew rate: 7000 V/µs
  • Input voltage noise: 2.3 nV/√Hz
  • 1% settling time: 0.7 ns
  • Input-impedance: 50 GΩ || 2.4 pF
  • Capable of driving 50 Ω load
  • Adjustable quiescent current for power and performance trade-off
  • Integrated input and output clamp with fast overdrive recovery
  • Voltage supply: ±4.5 V to ±6.5 V
  • Large-signal bandwidth (1 VPP): 3.1 GHz
  • Slew rate: 7000 V/µs
  • Input voltage noise: 2.3 nV/√Hz
  • 1% settling time: 0.7 ns
  • Input-impedance: 50 GΩ || 2.4 pF
  • Capable of driving 50 Ω load
  • Adjustable quiescent current for power and performance trade-off
  • Integrated input and output clamp with fast overdrive recovery
  • Voltage supply: ±4.5 V to ±6.5 V

The BUF802 device is an open-loop, unity gain buffer with a JFET-input stage that offers low-noise, high-impedance buffering for data acquisition system (DAQ) front-ends. The BUF802 supports DC to 3.1 GHz of bandwidth while offering excellent distortion and noise performance across the frequency range.

The BUF802 may be used in a composite loop with a precision amplifier in applications where higher precision performance is required. The BUF802 uses an innovative architecture to simplify the design of high-precision, wide-bandwidth composite loops.

The BUF802 features an adjustable quiescent current pin, which enables designers to trade bandwidth and distortion for a lower quiescent current, thus making the part suitable across a wide-frequency range. The BUF802 has integrated input and output clamps to protect the device and its subsequent signal-chain from overdrive voltages.

.

The BUF802 device is an open-loop, unity gain buffer with a JFET-input stage that offers low-noise, high-impedance buffering for data acquisition system (DAQ) front-ends. The BUF802 supports DC to 3.1 GHz of bandwidth while offering excellent distortion and noise performance across the frequency range.

The BUF802 may be used in a composite loop with a precision amplifier in applications where higher precision performance is required. The BUF802 uses an innovative architecture to simplify the design of high-precision, wide-bandwidth composite loops.

The BUF802 features an adjustable quiescent current pin, which enables designers to trade bandwidth and distortion for a lower quiescent current, thus making the part suitable across a wide-frequency range. The BUF802 has integrated input and output clamps to protect the device and its subsequent signal-chain from overdrive voltages.

.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 6
Type Title Date
* Data sheet BUF802 Wide-Bandwidth, 2.3 nV/√Hz, High-Input Impedance Buffer datasheet (Rev. C) PDF | HTML 18 Mar 2022
Product overview Pairing High-Speed JFET Amplifiers With Hi-Z DAQ Systems PDF | HTML 08 Apr 2024
Application note Choosing an Amplifier for Wide Bandwidth, High-Impedance, Data Acquisition AFEs PDF | HTML 02 Mar 2023
Application brief How to Tune the S-Parameters of Your Analog Front-End Signal Chain PDF | HTML 25 Feb 2022
EVM User's guide BUF802RGTEVM User's Guide (Rev. A) PDF | HTML 04 Feb 2022
Technical article Achieving high-DC precision and wide large signal bandwidth with Hi-Z buffers PDF | HTML 18 Jan 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BUF802RGTEVM — BUF802 evaluation module high-speed, wide-bandwidth, 2.3-nV/√Hz, input buffer in RGT package

The BUF802RGTEVM is designed to easily demonstrate the functionality and versatility of the buffer. The EVM features two separate circuit configurations: a composite loop with a precision amplifier and a standalone BUF802 circuit. It can be used with split or single supplies, and includes SMA (...)
User guide: PDF | HTML
Not available on TI.com
Simulation model

BUF802 PSpice model

SBOMC43.ZIP (187 KB) - PSpice Model
Simulation model

BUF802 TINA-TI Reference Circuit (Rev. D)

SBOMBQ8D.TSC (5895 KB) - TINA-TI Spice Model
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Calculation tool

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
Reference designs

TIDA-01022 — Flexible 3.2-GSPS multi-channel AFE reference design for DSOs, radar and 5G wireless test systems

This high speed multi-channel data capture reference design enables optimum system performance. System designers needs to consider critical design parameters like clock jitter and skew for high speed multi-channel clock generation, which affects overall system SNR, SFDR, channel to channel skew (...)
Design guide: PDF
Schematic: PDF
Package Pins CAD symbols, footprints & 3D models
VQFN (RGT) 16 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos