AFE58JD18

Name: AFE58JD18
Brand: TI
SKU: AFE58JD18
Price: 153.36 USD

AKTIV

Analoges 16-Kanal-Ultraschall-Frontend mit 140 mW/Kanal Leistung, 0,75-nV/√Hz Rauschen

Jetzt bestellen

Datenblatt

document-pdfAcrobat AFE58JD18 16-Channel, Ultrasound AFE with 14-Bit, 65-MSPS or 12-Bit, 80-MSPS ADC, Passive CW Mixer, I/Q Demodulator, and LVDS, JESD204B Outputs datasheet (Rev. A) (Englisch) PDF | HTML

AFE58JD18

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Device type

Receiver

Number of input channels

16

Active supply current (typ) (mA)

274

Supply voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Interface type

JESD204B, LVDS

Features

Analog Front End (AFE)

Rating

Catalog

Device type

Receiver

Number of input channels

16

Active supply current (typ) (mA)

274

Supply voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Interface type

JESD204B, LVDS

Features

Analog Front End (AFE)

Rating

Catalog

NFBGA (ZBV)

289

225 mm² 15 x 15

16-Channel, Complete Analog Front-End (AFE):
- LNA, VCAT, PGA, LPF, ADC, and CW Mixer
LNA with Programmable Gain:
- Gain: 24 dB, 18 dB, and 12 dB
- Linear Input Range:
  0.25 V_PP, 0.5 V_PP, and 1 V_PP
- Input-Referred Noise:
  0.63 nV/√Hz, 0.7 nV/√Hz, and 0.9 nV/√Hz
- Programmable Active Termination
Voltage-Controlled Attenuator (VCAT): 40 dB
Programmable Gain Amplifier (PGA):
24 dB and 30 dB
Total Signal Chain Gain: 54 dB (max)
3rd-Order, Linear-Phase LPF:
- 10 MHz, 15 MHz, 20 MHz, 30 MHz, 35 MHz,
  and 50 MHz
Analog-to-Digital Converter (ADC):
- 14-Bit ADC: 75-dBFS SNR at 65 MSPS
- 12-Bit ADC: 72-dBFS SNR at 80 MSPS
LVDS Interface Maximum Speed of 1 Gbps
Noise and Power Optimizations (Full-Channel):
- 140 mW/Ch at 0.75 nV/√Hz, 65 MSPS
- 91.5 mW/Ch at 1.1 nV/√Hz, 40 MSPS
- 80 mW/Ch at CW Mode
Excellent Device-to-Device Gain Matching:
- ±0.5 dB (typical) and ±1.1 dB (max)
Low Harmonic Distortion
Fast and Consistent Overload Recovery
Passive Mixer for CWD:
- Low Close-In Phase Noise:
  –156 dBc/Hz at 1 kHz Off 2.5-MHz Carrier
- Phase Resolution: λ / 16
- Supports 16X, 8X, 4X, and 1X CW Clocks
- CWD High-Pass Filter Rejects Undesired Low-
  Frequency Signals < 1 kHz
Digital Features:
- Digital I/Q Demodulator after ADC:
  - Fractional Decimation Filter M = 1 to
    63 with 0.25X Increment Step
  - Data Throughput Reduction After
    Decimation
  - On-Chip RAM with 32 Preset Profiles
5-Gbps JESD Interface:
- JESD204B Subclass 0, 1, and 2
- 2, 4, or 8 Channels per JESD Lane
Small Package: 15-mm × 15-mm NFBGA-289

16-Channel, Complete Analog Front-End (AFE):
- LNA, VCAT, PGA, LPF, ADC, and CW Mixer
LNA with Programmable Gain:
- Gain: 24 dB, 18 dB, and 12 dB
- Linear Input Range:
  0.25 V_PP, 0.5 V_PP, and 1 V_PP
- Input-Referred Noise:
  0.63 nV/√Hz, 0.7 nV/√Hz, and 0.9 nV/√Hz
- Programmable Active Termination
Voltage-Controlled Attenuator (VCAT): 40 dB
Programmable Gain Amplifier (PGA):
24 dB and 30 dB
Total Signal Chain Gain: 54 dB (max)
3rd-Order, Linear-Phase LPF:
- 10 MHz, 15 MHz, 20 MHz, 30 MHz, 35 MHz,
  and 50 MHz
Analog-to-Digital Converter (ADC):
- 14-Bit ADC: 75-dBFS SNR at 65 MSPS
- 12-Bit ADC: 72-dBFS SNR at 80 MSPS
LVDS Interface Maximum Speed of 1 Gbps
Noise and Power Optimizations (Full-Channel):
- 140 mW/Ch at 0.75 nV/√Hz, 65 MSPS
- 91.5 mW/Ch at 1.1 nV/√Hz, 40 MSPS
- 80 mW/Ch at CW Mode
Excellent Device-to-Device Gain Matching:
- ±0.5 dB (typical) and ±1.1 dB (max)
Low Harmonic Distortion
Fast and Consistent Overload Recovery
Passive Mixer for CWD:
- Low Close-In Phase Noise:
  –156 dBc/Hz at 1 kHz Off 2.5-MHz Carrier
- Phase Resolution: λ / 16
- Supports 16X, 8X, 4X, and 1X CW Clocks
- CWD High-Pass Filter Rejects Undesired Low-
  Frequency Signals < 1 kHz
Digital Features:
- Digital I/Q Demodulator after ADC:
  - Fractional Decimation Filter M = 1 to
    63 with 0.25X Increment Step
  - Data Throughput Reduction After
    Decimation
  - On-Chip RAM with 32 Preset Profiles
5-Gbps JESD Interface:
- JESD204B Subclass 0, 1, and 2
- 2, 4, or 8 Channels per JESD Lane
Small Package: 15-mm × 15-mm NFBGA-289

The AFE58JD18 is a highly-integrated, analog front-end (AFE) solutions specifically designed for ultrasound systems where high performance and small size are required.

To request a full datasheet or other design resources: request AFE58JD18

The AFE58JD18 has a total of 16 channels, with each channel consisting of a voltage-controlled amplifier (VCA), a simultaneous sampling 14-bit and 12-bit analog-to-digital converter (ADC), and a continuous wave (CW) mixer. The VCA includes a low-noise amplifier (LNA), a voltage-controlled attenuator (VCAT), a programmable gain amplifier (PGA), and a low-pass filter (LPF). LNA gain is programmable and supports 250-mV_PP to 1-V_PP input signals and programmable active termination. The ultra-low noise VCAT provides an attenuation control range of 40 dB and improves overall low-gain SNR, which benefits harmonic and near-field imaging. The PGA provides gain options of 24 dB and 30 dB. In front of the ADC, an LPF can be configured at 10 MHz, 15 MHz, 20 MHz, 30 MHz, 35 MHz, or 50 MHz to support ultrasound applications with different frequencies.

The AFE58JD18 also integrates a low-power passive mixer and a low-noise summing amplifier to create an on-chip CWD beamformer. 16 selectable phase delays can be applied to each analog input signal. Furthermore, a unique third- and fifth-order harmonic suppression filter is implemented to enhance CW sensitivity

The high-performance, 14-bit ADC achieves 75-dBFS SNR. This ADC ensures excellent SNR at low-chain gain. The device can operate at maximum speeds of 65 MSPS and 80 MSPS, providing a 14-bit and a 12-bit output, respectively.

The ADC low-voltage differential signaling (LVDS) outputs enable a flexible system integration that is desirable for miniaturized systems.

The AFE58JD18 additionally includes an optional digital demodulator and JESD204B data packing blocks after the 12- or 14-bit ADC. The digital in-phase and quadrature (I/Q) demodulator with programmable fractional decimation filters accelerates computationally-intensive algorithms at low power. A JESD204B interface that runs up to 5 Gbps further reduces the circuit board routing challenges in high-channel count systems.

The AFE58JD18 also allows various power and noise combinations to be selected to optimize system performance. Therefore, the AFE58JD18 is a suitable ultrasound AFE solution for both high-end and portable systems.

The AFE58JD18 is available in a 15-mm × 15-mm NFBGA-289 package (ZBV package, S-PBGA-N289) and is specified for operation from –40°C to 85°C. The device pinout is also similar to the AFE5816 device family.