CDCE813-Q1

Name: CDCE813-Q1
Brand: TI
SKU: CDCE813-Q1
Price: 1.751 USD

AKTIV

Programmierbarer 1-PLL-Taktsynthesizer und Jitter-Cleaner mit 2,5-V- und 3,3-V-Ausgängen

Jetzt bestellen

Datenblatt

document-pdfAcrobat CDCE813-Q1 Programmable 1-PLL Clock Synthesizer and Jitter Cleaner With 2.5V and 3.3V Outputs datasheet (Rev. D) (Englisch) PDF | HTML

CDCE813-Q1

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Single-loop PLL

Number of outputs

3

RMS jitter (fs)

50000

Output frequency (min) (MHz)

0.07

Output frequency (max) (MHz)

230

Input type

LVCMOS (REF_CLK)

Output type

LVCMOS

Supply voltage (min) (V)

1.7

Supply voltage (max) (V)

3.6

Features

Integrated EEPROM

Rating

Automotive

Operating temperature range (°C)

-40 to 105

Number of input channels

1

Function

Single-loop PLL

Number of outputs

3

RMS jitter (fs)

50000

Output frequency (min) (MHz)

0.07

Output frequency (max) (MHz)

230

Input type

LVCMOS (REF_CLK)

Output type

LVCMOS

Supply voltage (min) (V)

1.7

Supply voltage (max) (V)

3.6

Features

Integrated EEPROM

Rating

Automotive

Operating temperature range (°C)

-40 to 105

Number of input channels

1

TSSOP (PW)

14

32 mm² 5 x 6.4

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to 105°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
In-system programmability and EEPROM
- Serial programmable volatile register
- Nonvolatile EEPROM to store customer settings
Flexible input clocking concept
- External crystal: 8MHz to 32MHz
- Single-ended LVCMOS up to 160MHz
Free selectable output frequency up to 230 MHz
Low-noise PLL core
- PLL loop filter components integrated
- Low period jitter (typical 50ps)
1.8V device power supply (core voltage)
Separate output supply pins: 3.3V and 2.5V
Flexible clock driver
- Three user-definable control inputs [S0, S1, S2], for example, SSC selection, frequency switching, output enable, or power down
- Generates highly accurate clocks for video, audio, USB, IEEE1394, RFID, Bluetooth, WLAN, Ethernet, and GPS
- Generates common clock frequencies used with TI- DaVinci™, OMAP™, DSPs
- Programmable SSC modulation
- Enables 0PPM clock generation
Packaged in TSSOP
Development and programming kit for easy PLL design and programming (TI ClockPro™ programming software)

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to 105°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
In-system programmability and EEPROM
- Serial programmable volatile register
- Nonvolatile EEPROM to store customer settings
Flexible input clocking concept
- External crystal: 8MHz to 32MHz
- Single-ended LVCMOS up to 160MHz
Free selectable output frequency up to 230 MHz
Low-noise PLL core
- PLL loop filter components integrated
- Low period jitter (typical 50ps)
1.8V device power supply (core voltage)
Separate output supply pins: 3.3V and 2.5V
Flexible clock driver
- Three user-definable control inputs [S0, S1, S2], for example, SSC selection, frequency switching, output enable, or power down
- Generates highly accurate clocks for video, audio, USB, IEEE1394, RFID, Bluetooth, WLAN, Ethernet, and GPS
- Generates common clock frequencies used with TI- DaVinci™, OMAP™, DSPs
- Programmable SSC modulation
- Enables 0PPM clock generation
Packaged in TSSOP
Development and programming kit for easy PLL design and programming (TI ClockPro™ programming software)

The CDCE813-Q1 device is a modular Phase-locked-loop-based (PLL), low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL.

The CDCE813-Q1 has separate output supply pins, VDDOUT, providing 2.5V to 3.3V.

The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.

The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.

The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the I2C bus, a 2-wire serial interface.

The CDCE813-Q1 operates in a 1.8V core environment as well as eliminating the need for additional, independent XTAL oscillators which reduces component count and board size. The device operates in a temperature range of –40°C to 105°C.

The CDCE813-Q1 device is a modular Phase-locked-loop-based (PLL), low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL.

The CDCE813-Q1 has separate output supply pins, VDDOUT, providing 2.5V to 3.3V.

The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.

The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.

The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the I2C bus, a 2-wire serial interface.

The CDCE813-Q1 operates in a 1.8V core environment as well as eliminating the need for additional, independent XTAL oscillators which reduces component count and board size. The device operates in a temperature range of –40°C to 105°C.

filter

Andere Takt-Jitter-Cleaner suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	CDCE813-Q1 Programmable 1-PLL Clock Synthesizer and Jitter Cleaner With 2.5V and 3.3V Outputs datasheet (Rev. D)	PDF \| HTML	08 Feb 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

CDCE813 IBIS Model

SNAM227.ZIP (27 KB) - IBIS Model

Herunterladen

Designtool

CLOCK-TREE-ARCHITECT — Programmiersoftware Clock Tree Architect

Clock tree architect is a clock tree synthesis tool that streamlines your design process by generating clock tree solutions based on your system requirements. The tool pulls data from an extensive database of clocking products to generate a system-level multi-chip clocking solution.

Jetzt entwickeln

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
TSSOP (PW)	14	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

CDCE813-Q1

Programmierbarer 1-PLL-Taktsynthesizer und Jitter-Cleaner mit 2,5-V- und 3,3-V-Ausgängen

CDCE813-Q1

Produktdetails

Technische Dokumentation

Design und Entwicklung

CDCE813 IBIS Model

CLOCK-TREE-ARCHITECT — Programmiersoftware Clock Tree Architect

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos