ISO1050

AKTIV

Isolierter CAN-Transceiver, 5 V

Jetzt bestellen

Datenblatt

document-pdfAcrobat ISO1050 Isolated CAN Transceiver datasheet (Rev. L) (Englisch) PDF | HTML

ISO1050

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Isolation rating

Basic

Data rate (max) (Mbps)

1

Working isolation voltage (VIOWM) (Vrms)

400, 850

Surge isolation voltage (VIOSM) (VPK)

4000

Transient isolation voltage (VIOTM) (VPK)

4000

Withstand isolation voltage (VISO) (Vrms)

4243

CMTI (min) (kV/µs)

25

Bus fault voltage (V)

-27 to 40

Common-mode voltage (V)

-12 to 12

Operating temperature range (°C)

-55 to 105

Rating

Catalog

Isolation rating

Basic

Data rate (max) (Mbps)

1

Working isolation voltage (VIOWM) (Vrms)

400, 850

Surge isolation voltage (VIOSM) (VPK)

4000

Transient isolation voltage (VIOTM) (VPK)

4000

Withstand isolation voltage (VISO) (Vrms)

4243

CMTI (min) (kV/µs)

25

Bus fault voltage (V)

-27 to 40

Common-mode voltage (V)

-12 to 12

Operating temperature range (°C)

-55 to 105

SOIC (DW)

16

106.09 mm² 10.3 x 10.3

SOP (DUB)

8

98.8 mm² 9.5 x 10.4

Meets the requirements of ISO11898-2
5000-V RMS isolation (ISO1050DW)
2500-V RMS isolation (ISO1050DUB)
Fail-safe outputs
Low loop delay: 150 ns (typical), 210 ns (maximum)
50-kV/µs typical transient immunity
Bus-fault protection of –27 V to 40 V
Driver (TXD) dominant time-out function
I/O voltage range supports 3.3 V and 5 V microprocessors
Safety-related certifications
- VDE approval per DIN EN IEC 60747-17 (VDE 0884-17)
- UL 1577 approved
- CSA approved for IEC 61010-1, IEC 60601-1
- TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only)
- CQC reinforced insulation per GB4943.1 (ISO1050DW-only)
- Typical 25-year life at rated working voltage (see application report SLLA197 and Life Expectancy vs Working Voltage)

Meets the requirements of ISO11898-2
5000-V RMS isolation (ISO1050DW)
2500-V RMS isolation (ISO1050DUB)
Fail-safe outputs
Low loop delay: 150 ns (typical), 210 ns (maximum)
50-kV/µs typical transient immunity
Bus-fault protection of –27 V to 40 V
Driver (TXD) dominant time-out function
I/O voltage range supports 3.3 V and 5 V microprocessors
Safety-related certifications
- VDE approval per DIN EN IEC 60747-17 (VDE 0884-17)
- UL 1577 approved
- CSA approved for IEC 61010-1, IEC 60601-1
- TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only)
- CQC reinforced insulation per GB4943.1 (ISO1050DW-only)
- Typical 25-year life at rated working voltage (see application report SLLA197 and Life Expectancy vs Working Voltage)

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO 2) insulation barrier that provides galvanic isolation of up to 5000 V RMS for ISO1050DW and 2500 V RMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12V to 12V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO 2) insulation barrier that provides galvanic isolation of up to 5000 V RMS for ISO1050DW and 2500 V RMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12V to 12V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.

filter

Andere Isolierte CAN-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 17

	Typ	Titel		Datum
*	Data sheet	ISO1050 Isolated CAN Transceiver datasheet (Rev. L)	PDF \| HTML	03 Okt 2023
	Application note	Top Design Questions About Isolated CAN Bus Design (Rev. B)	PDF \| HTML	24 Okt 2024
	Certificate	VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. W)		31 Jan 2024
	Certificate	CSA Certificate for ISO1050		16 Mär 2023
	Certificate	CQC Certificate for ISO1050 (Rev. A)		07 Feb 2023
	Product overview	Isolating a CAN Bus (Rev. A)	PDF \| HTML	13 Jan 2023
	Application note	Isolated CAN Solution by Using ISO1050 and SN6501 (Rev. B)	PDF \| HTML	22 Sep 2022
	Certificate	UL Certificate of Compliance File E181974 Vol 4 Sec 4		08 Aug 2022
	Certificate	TUV Certificate for ISO1050		05 Aug 2022
	Application brief	Isolate Your CAN Systems Without Compromising on Performance or Space (Rev. F)	PDF \| HTML	04 Aug 2022
	White paper	Why are Digital Isolators Certified to Meet Electrical Equipment Standards?		16 Nov 2021
	White paper	Distance Through Insulation: How Digital Isolators Meet Certification Requiremen	PDF \| HTML	11 Jun 2021
	Application brief	How to Isolate Signal and Power in Isolated CAN Systems (Rev. C)	PDF \| HTML	25 Mai 2021
	Application note	Isolated CAN Reference Design (Rev. E)		22 Jul 2020
	Application note	How to Design Isolated CAN Systems With Correct Bus Protection		19 Jun 2018
	EVM User's guide	Isolated CAN EVM User's Guide		02 Jul 2009
	Application note	Common-Mode Chokes in CAN Networks: Source of Unexpected Transients		29 Jan 2008

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ISO1050EVM — ISO1050 Isoliertes CAN-Transceiver-Evaluierungsmodul

This multi-functional evaluation module (EVM) is designed for the evaluation of the ISO1050 isolated CAN transceiver. Input and output connections, as well as test points for measurements, are provided to help you use this device which is the world's first CAN transceiver with integrated isolation.

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Entwicklungskit

TMDXIDDK379D — C2000 DesignDRIVE-Entwicklungskit für Industriemotorsteuerung

The DesignDRIVE Development Kit (IDDK) hardware offers an integrated servo drive design with full power stage to drive a high voltage three-phase motor and eases the evaluation of a range of position feedback, current sensing and control topologies.

The sensing peripherals on the C2000™ MCU, (...)

Benutzerhandbuch: PDF | HTML

View Options

Simulationsmodell