Startseite Verstärker Komparatoren
Startseite
Verstärker
Komparatoren

TLV1704-SEP

AKTIV

Strahlungstoleranter Vierfach-Komparator, MicroPower, 2,2 bis 36 V, in Space-Enhanced Plastic

Jetzt bestellen
Datenblatt

TLV1704-SEP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 4 Output type Open-collector, Open-drain Propagation delay time (µs) 0.56 Vs (max) (V) 36 Vs (min) (V) 2.2 Vos (offset voltage at 25°C) (max) (mV) 2.5 Iq per channel (typ) (mA) 0.055 Input bias current (±) (max) (nA) 15 Rail-to-rail In Rating Space Operating temperature range (°C) -55 to 125 VICR (max) (V) 36 VICR (min) (V) 0
Number of channels 4 Output type Open-collector, Open-drain Propagation delay time (µs) 0.56 Vs (max) (V) 36 Vs (min) (V) 2.2 Vos (offset voltage at 25°C) (max) (mV) 2.5 Iq per channel (typ) (mA) 0.055 Input bias current (±) (max) (nA) 15 Rail-to-rail In Rating Space Operating temperature range (°C) -55 to 125 VICR (max) (V) 36 VICR (min) (V) 0
TSSOP (PW) 14 32 mm² 5 x 6.4
  • VID V62/18613
  • Radiation-Tolerant
    • Single Event Latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
    • ELDRS free to 30 krad(Si)
    • Total Ionizing Dose (TID) rlat for every wafer lot up to 20 krad(Si)
  • Space enhanced plastic
    • Controlled baseline
    • Gold wire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Supply range: 2.2 V to 36 V or ±1.1 V to ±18 V
  • Low quiescent current: 55 µA per comparator
  • Input common-mode range includes both rails
  • Low propagation delay: 560 ns
  • Low input offset voltage: 300 µV
  • Open collector outputs:
    • Up to 36 V above negative supply regardless of supply voltage
  • Small packages:
    • Quad: TSSOP-14
  • VID V62/18613
  • Radiation-Tolerant
    • Single Event Latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
    • ELDRS free to 30 krad(Si)
    • Total Ionizing Dose (TID) rlat for every wafer lot up to 20 krad(Si)
  • Space enhanced plastic
    • Controlled baseline
    • Gold wire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Supply range: 2.2 V to 36 V or ±1.1 V to ±18 V
  • Low quiescent current: 55 µA per comparator
  • Input common-mode range includes both rails
  • Low propagation delay: 560 ns
  • Low input offset voltage: 300 µV
  • Open collector outputs:
    • Up to 36 V above negative supply regardless of supply voltage
  • Small packages:
    • Quad: TSSOP-14

The TLV1704-SEP (Quad) device offers a wide supply range, rail-to-rail inputs, low quiescent current, and low propagation delay. All these features come in industry-standard, extremely-small packages, making these devices the best general-purpose comparators available.

The open collector output offers the advantage of allowing the output to be pulled to any voltage rail up to 36 V above the negative power supply, regardless of the TLV1704-SEP supply voltage.

The device is a microPower comparator. Low input offset voltage, low input bias currents, low supply current, and open-collector configuration make the TLV1704-SEP device flexible enough to handle almost any application, from simple voltage detection to driving a single relay.

The TLV1704-SEP (Quad) device offers a wide supply range, rail-to-rail inputs, low quiescent current, and low propagation delay. All these features come in industry-standard, extremely-small packages, making these devices the best general-purpose comparators available.

The open collector output offers the advantage of allowing the output to be pulled to any voltage rail up to 36 V above the negative power supply, regardless of the TLV1704-SEP supply voltage.

The device is a microPower comparator. Low input offset voltage, low input bias currents, low supply current, and open-collector configuration make the TLV1704-SEP device flexible enough to handle almost any application, from simple voltage detection to driving a single relay.
filter Andere Komparatoren suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 14
Typ Titel Datum
* Data sheet TLV1704-SEP 2.2-V to 36-V, Radiation-Tolerant microPower Quad Comparator in Space Enhanced Plastic datasheet (Rev. A) PDF | HTML 09 Nov 2022
* Radiation & reliability report TLV1704-SEP Neutron Displacement Damage (NDD) Characterization Report PDF | HTML 17 Mär 2022
* Radiation & reliability report TLV1704-SEP Production Flow and Reliability Report 18 Jul 2019
* Radiation & reliability report TLV1704-SEP Single-Event Latch-Up (SEL) Radiation Report 14 Nov 2018
* Radiation & reliability report TLV1704-SEP Radiation Hardened microPower Quad Comparator Plastic TID Report 11 Nov 2018
Selection guide TI Space Products (Rev. J) 12 Feb 2024
Technical article How Space Enhanced Products Address Challenges in low Earth orbit Applications (Rev. A) PDF | HTML 18 Dez 2023
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 15 Sep 2022
Application brief Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML 07 Mär 2022
Circuit design Space-Grade, 30-krad, High-Side Current Sensing Comparator Circuit PDF | HTML 08 Apr 2021
Circuit design Comparator with and without hysteresis circuit (Rev. A) 04 Feb 2019
Circuit design High-side current sensing with comparator circuit 20 Sep 2018
Application note Reverse Current Protection Using MOSFET and Comparator to Minimize Power Dissipa 22 Feb 2018
User guide Universal Operational Amplifier Evaluation Module Selection Guide (Rev. B) 20 Mär 2001

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

OPAMPEVM-MSOPTSSOP — Universelles EVM für Einzel-/Doppel-/Vierfach-Operationsverstärker mit/ohne Abschaltung in MSOP/TSSO

The OPAMPEVM-MSOPTSSOP is a general purpose blank circuit board that simplifies evaluation of surface-mount op amps. The evaluation module board design allows many different circuits to be constructed easily and quickly. The board has three separate circuit development areas that can be snapped (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationsmodell

TLV1704-SEP TINA-TI High-Side Current Sensing Reference Design

SBOMBL5.ZIP (4 KB) - TINA-TI Reference Design
Herunterladen
Simulationsmodell

TLV170x and TLV170x-Q1 PSpice Model (Rev. C)

SBOM859C.ZIP (91 KB) - PSpice Model
Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TSSOP (PW) 14 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos