Produktdetails

Protocols Analog Audio Configuration Crosspoint/exchange Number of channels 2 Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 3 Ron (typ) (mΩ) 80 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Supply current (typ) (µA) 40 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 85 ESD CDM (kV) 0.5 Input/output continuous current (max) (mA) 100 OFF-state leakage current (max) (µA) 0.5 Propagation delay time (µs) 0.01 Ron (max) (mΩ) 110 RON flatness (typ) (Ω) 1 Turnoff time (disable) (max) (ns) 10 Turnon time (enable) (max) (ns) 200 VIH (min) (V) 1.2 VIL (max) (V) 0.4
Protocols Analog Audio Configuration Crosspoint/exchange Number of channels 2 Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 3 Ron (typ) (mΩ) 80 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Supply current (typ) (µA) 40 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 85 ESD CDM (kV) 0.5 Input/output continuous current (max) (mA) 100 OFF-state leakage current (max) (µA) 0.5 Propagation delay time (µs) 0.01 Ron (max) (mΩ) 110 RON flatness (typ) (Ω) 1 Turnoff time (disable) (max) (ns) 10 Turnon time (enable) (max) (ns) 200 VIH (min) (V) 1.2 VIL (max) (V) 0.4
DSBGA (YZP) 6 2.1875 mm² 1.75 x 1.25
  • Ultra Low RON for GND Switch (80-mΩ typical)
  • RON for MIC Switch <10-Ω
  • 3.0V to 3.6V V+ Operation
  • Control Input is 1.8-V Logic Compatible
  • 6-bump, 0.5mm pitch CSP Package (1.45mm × 0.95mm × 0.5mm)
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 500-V Charged-Device Model (C101)
  • ESD Performance (SLEEVE, RING2)
    • ±8-kV Contact Discharge (IEC 61000-4-2)
  • Ultra Low RON for GND Switch (80-mΩ typical)
  • RON for MIC Switch <10-Ω
  • 3.0V to 3.6V V+ Operation
  • Control Input is 1.8-V Logic Compatible
  • 6-bump, 0.5mm pitch CSP Package (1.45mm × 0.95mm × 0.5mm)
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 500-V Charged-Device Model (C101)
  • ESD Performance (SLEEVE, RING2)
    • ±8-kV Contact Discharge (IEC 61000-4-2)

The TS3A26746E is a 2 × 2 cross-point switch that is used to interchange the Ground and MIC connections on a headphone connector. The Ground switch has an ultra low RON of <0.1Ω to minimize voltage drop across it, preventing undesired increases in headphone ground reference voltage. The switch state is controlled via the SEL input. When SEL=High, GND is connected to RING2 and MIC is connected to SLEEVE. When SEL=Low, GND is connected to SLEEVE and MIC is connected to RING2. An internal 100k pull-up resistor on the SEL input sets the default state of the switch.

The TS3A26746E is a 2 × 2 cross-point switch that is used to interchange the Ground and MIC connections on a headphone connector. The Ground switch has an ultra low RON of <0.1Ω to minimize voltage drop across it, preventing undesired increases in headphone ground reference voltage. The switch state is controlled via the SEL input. When SEL=High, GND is connected to RING2 and MIC is connected to SLEEVE. When SEL=Low, GND is connected to SLEEVE and MIC is connected to RING2. An internal 100k pull-up resistor on the SEL input sets the default state of the switch.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet 2 X 2 CROSSPOINT SWITCH FOR AUDIO APPLICATIONS datasheet (Rev. C) 23 Mai 2013
Technical article USB Type-C audio: Do I need to buy a new pair of headphones? PDF | HTML 07 Jul 2016
Application note Preventing Excess Power Consumption on Analog Switches 03 Jul 2008
Application note Semiconductor Packing Material Electrostatic Discharge (ESD) Protection 08 Jul 2004

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Schnittstellenadapter

LEADLESS-ADAPTER1 — Oberflächenmontierbarer DIP-Header-Adapter zum Testen der 6-, 8-, 10-, 12-, 14-, 16- und 20-poligen

The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages.  The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.
Benutzerhandbuch: PDF
Simulationsmodell

TS3A26746E HSpice Model

SCDM143.ZIP (587 KB) - HSpice Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DSBGA (YZP) 6 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos