Inicio Circuitos integrados de gestión de baterías Circuitos integrados para cargadores de baterías
Inicio
Circuitos integrados de gestión de baterías
Circuitos integrados para cargadores de baterías

BQ25910

ACTIVO

Cargador de batería reductor de 3 niveles I2C de 1 celda 6 A para aplicaciones de carga en paralelo

Haga su pedido ahora
Hoja de datos

BQ25910

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of series cells 1 Charge current (max) (A) 6 Vin (max) (V) 14 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.775 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface I2C Features IC thermal regulation, IINDPM (Input current limit), Input OVP, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 6 Vin (max) (V) 14 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.775 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface I2C Features IC thermal regulation, IINDPM (Input current limit), Input OVP, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YFF) 36 1.4000000000000001 mm² 1 x 1.4000000000000001
  • Parallel charger operation provides fast charging in dual charger configuration
  • High efficiency 750-kHz switch mode three-level buck parallel charger
    • Reduced ripple to support low profile inductor
    • 95.4% Charge efficiency at 1.5 A from 5-V input
    • 93.3% Charge efficiency at 3 A from 9-V input
    • Superior efficiency compared to traditional buck converter in compact form factor
  • Single Input to support USB input and adjustable high voltage adapters
    • Support 3.9-V to 14-V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.6 A with 100-mA resolution) to support USB2.0 and USB 3.0 standard and high voltage adaptors
    • Maximum power tracking by input voltage limit (VINDPM) up to 14 V
  • Flexible I2C mode for optimal system performance
  • High integration includes all MOSFETs, current sensing and loop compensation
    • Lossless charge current sensing without sense resistor
  • < 10-µA Low battery leakage current during stand-by mode
  • High accuracy
    • ±0.4% Charge voltage regulation
    • ±10% Charge current regulation
    • ±7.5% Input current regulation
    • Remote differential battery sensing
  • Safety
    • Thermal regulation and thermal shutdown
    • Input UVLO and overvoltage protection
    • Battery OVP
    • Input dynamic power management (DPM)
    • Charging safety timer
    • Flying capacitor short circuit protection
    • Output voltage short circuit protection
  • Available in 36-ball WCSP package
  • Parallel charger operation provides fast charging in dual charger configuration
  • High efficiency 750-kHz switch mode three-level buck parallel charger
    • Reduced ripple to support low profile inductor
    • 95.4% Charge efficiency at 1.5 A from 5-V input
    • 93.3% Charge efficiency at 3 A from 9-V input
    • Superior efficiency compared to traditional buck converter in compact form factor
  • Single Input to support USB input and adjustable high voltage adapters
    • Support 3.9-V to 14-V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.6 A with 100-mA resolution) to support USB2.0 and USB 3.0 standard and high voltage adaptors
    • Maximum power tracking by input voltage limit (VINDPM) up to 14 V
  • Flexible I2C mode for optimal system performance
  • High integration includes all MOSFETs, current sensing and loop compensation
    • Lossless charge current sensing without sense resistor
  • < 10-µA Low battery leakage current during stand-by mode
  • High accuracy
    • ±0.4% Charge voltage regulation
    • ±10% Charge current regulation
    • ±7.5% Input current regulation
    • Remote differential battery sensing
  • Safety
    • Thermal regulation and thermal shutdown
    • Input UVLO and overvoltage protection
    • Battery OVP
    • Input dynamic power management (DPM)
    • Charging safety timer
    • Flying capacitor short circuit protection
    • Output voltage short circuit protection
  • Available in 36-ball WCSP package

The BQ25910 is an integrated three-level switch-mode parallel battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter maintains highest switch-mode operation efficiency while reducing solution footprint and increasing power density. The device supports fast charging with high input voltage for a wide range of portable devices. The solution integrates reverse-blocking FET (QBLK), and four switching FETs (QHSA, QHSB, QLSB, QLSA). The I2C serial interface with charging and system settings makes the device a truly flexible solution.

The BQ25910 is an integrated three-level switch-mode parallel battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter maintains highest switch-mode operation efficiency while reducing solution footprint and increasing power density. The device supports fast charging with high input voltage for a wide range of portable devices. The solution integrates reverse-blocking FET (QBLK), and four switching FETs (QHSA, QHSB, QLSB, QLSA). The I2C serial interface with charging and system settings makes the device a truly flexible solution.
filter Buscar otro/a Circuitos integrados para cargadores de baterías
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet BQ25910 I2C Controlled 6-A Three-Level Switch Mode, Single-Cell Parallel Battery Charger for Fast Charging datasheet (Rev. B) PDF | HTML 29 jul 2019
Technical article How to increase charging current while shrinking overall solution size for portabl PDF | HTML 01 mar 2018
EVM User's guide bq25910EVM-854 Evaluation Module User's Guide (Rev. A) 01 mar 2018
Analog Design Journal Faster, cooler charging with dual chargers 30 oct 2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ25910EVM-854 — Módulo de evaluación de bq25910 para cargador esclavo de una celda de tres niveles

The bq25910 is an integrated three-level switch-mode slave battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter reduces solution footprint and volume while maintaining highest switch-mode operation efficiency.
Guía del usuario: PDF
No disponible en TI.com
Herramienta de cálculo

SLVC715 — bq25910 Calculation Tool

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados para cargadores de baterías
BQ25910 — Cargador de batería reductor de 3 niveles I2C de 1 celda 6 A para aplicaciones de carga en paralelo
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFF) 36 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos