Detalles del producto

Control interface Hardware (GPIO) Control mode Independent 1/2-Bridge, PWM Sleep current (mA) 0.5 Vs (max) (V) 60 Vs (min) (V) 8 Vs ABS (max) (V) 65 Peak output current (A) 2.5 Operating temperature range (°C) -40 to 125 Rating Catalog Topology Push-Pull
Control interface Hardware (GPIO) Control mode Independent 1/2-Bridge, PWM Sleep current (mA) 0.5 Vs (max) (V) 60 Vs (min) (V) 8 Vs ABS (max) (V) 65 Peak output current (A) 2.5 Operating temperature range (°C) -40 to 125 Rating Catalog Topology Push-Pull
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Quad 1/2-H-Bridge DC Motor Driver
    • Can Drive Four Solenoids, Two DC Motors, One Stepper Motor, or Other Loads
    • Full Individual Half Bridge Control
    • Low MOSFET On-Resistance
  • 2.5-A Maximum Drive Current at 24 V, 25°C
  • Floating Input Buffers Allow Dual (Bipolar) Supplies (up to ±30 V)
  • Built-In 3.3-V, 10-mA LDO Regulator
  • Industry Standard IN/IN Digital Control Interface
  • 8-V to 60-V Operating Supply Voltage Range
  • Outputs Can Be Connected in Parallel
  • Thermally Enhanced Surface Mount Package

All trademarks are the property of their respective owners.

  • Quad 1/2-H-Bridge DC Motor Driver
    • Can Drive Four Solenoids, Two DC Motors, One Stepper Motor, or Other Loads
    • Full Individual Half Bridge Control
    • Low MOSFET On-Resistance
  • 2.5-A Maximum Drive Current at 24 V, 25°C
  • Floating Input Buffers Allow Dual (Bipolar) Supplies (up to ±30 V)
  • Built-In 3.3-V, 10-mA LDO Regulator
  • Industry Standard IN/IN Digital Control Interface
  • 8-V to 60-V Operating Supply Voltage Range
  • Outputs Can Be Connected in Parallel
  • Thermally Enhanced Surface Mount Package

All trademarks are the property of their respective owners.

The DRV8844 provides four individually controllable 1/2-H-bridge drivers. It can be used to drive two DC motors, one stepper motor, four solenoids, or other loads. The output driver channel for each channel consists of N-channel power MOSFET’s configured in a 1/2-H-bridge configuration.

The DRV8844 can supply up to 2.5-A peak or 1.75-A RMS output current per channel (with proper PCB heatsinking at 24 V and 25°C) per H-bridge.

Separate inputs to independently control each 1/2-H-bridge are provided. To allow operation with split supplies, the logic inputs and nFAULT output are referenced to a separate floating ground pin.

Internal shutdown functions are provided for over current protection, short circuit protection, undervoltage lockout, and overtemperature.

The DRV8844 is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).

For all available packages, see the orderable addendum at the end of the data sheet.

The DRV8844 provides four individually controllable 1/2-H-bridge drivers. It can be used to drive two DC motors, one stepper motor, four solenoids, or other loads. The output driver channel for each channel consists of N-channel power MOSFET’s configured in a 1/2-H-bridge configuration.

The DRV8844 can supply up to 2.5-A peak or 1.75-A RMS output current per channel (with proper PCB heatsinking at 24 V and 25°C) per H-bridge.

Separate inputs to independently control each 1/2-H-bridge are provided. To allow operation with split supplies, the logic inputs and nFAULT output are referenced to a separate floating ground pin.

Internal shutdown functions are provided for over current protection, short circuit protection, undervoltage lockout, and overtemperature.

The DRV8844 is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).

For all available packages, see the orderable addendum at the end of the data sheet.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
DRV8932 ACTIVO Controlador de medio puente cuádruple independiente de 35 V y 1 A con detección de corriente 35V, 1.5A Quad Half Bridge driver with integrated current sense
DRV8955 ACTIVO Controlador de medio puente cuádruple de 50 V y 2.5 A con detección de corriente 60V, 2.5A dual H Bridge driver with independent half bridge control

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 10
Tipo Título Fecha
* Data sheet DRV8844 Quad ½-H-Bridge Driver IC datasheet (Rev. D) PDF | HTML 04 may 2016
Application note Understanding Motor Driver Current Ratings (Rev. A) PDF | HTML 05 jul 2024
Application note How to Drive Unipolar Stepper Motor with the DRV8xxx PDF | HTML 03 dic 2021
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 14 oct 2021
Application note Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 22 jul 2021
Application note Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 19 ene 2021
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 06 jul 2018
More literature TM4C123x Stepper Motor Control Product Summary 06 jul 2015
EVM User's guide DRV8844EVM Users Guide 01 ago 2012
Application brief PowerPAD™ Made Easy (Rev. B) 12 may 2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8844EVM — Módulo de evaluación DRV8844

The DRV8844 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8844 motor driver from Texas Instruments.
Guía del usuario: PDF
Soporte de software

SLVC445 DRV8844 Software

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Drivers de solenoides
DRV8844 60V, 2.5A dual H-bridge motor driver, bipolar (+/-30V) supply and independent 1/2-bridge control
Desarrollo de hardware
Placa de evaluación
DRV8844EVM Módulo de evaluación DRV8844
Esquema

Hardware: DRV8844EVM

SLVC592.ZIP (1083 KB)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (PWP) 28 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos