Inicio Gestión de la energía Controladores CA/CC y CC/CC (FET externo)

LM3475

ACTIVO

Controlador reductor PFET histerético de 10 V

Detalles del producto

Vin (min) (V) 2.7 Vin (max) (V) 10 Iout (max) (A) 5 Operating temperature range (°C) -40 to 125 Control mode Hysteretic Topology Buck Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 10 Features Enable, Light Load Efficiency Iq (typ) (µA) 260 Duty cycle (max) (%) 100 Number of phases 1
Vin (min) (V) 2.7 Vin (max) (V) 10 Iout (max) (A) 5 Operating temperature range (°C) -40 to 125 Control mode Hysteretic Topology Buck Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 10 Features Enable, Light Load Efficiency Iq (typ) (µA) 260 Duty cycle (max) (%) 100 Number of phases 1
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Easy-to-Use Control Methodology
  • 0.8 V to VIN Adjustable Output Range
  • High Efficiency (90% Typical)
  • ±0.9% (±1.5% Over Temperature) Feedback
    Voltage
  • 100% Duty Cycle Capable
  • Maximum Operating Frequency up to 2 MHz
  • Internal Soft-Start
  • Enable Pin
  • Easy-to-Use Control Methodology
  • 0.8 V to VIN Adjustable Output Range
  • High Efficiency (90% Typical)
  • ±0.9% (±1.5% Over Temperature) Feedback
    Voltage
  • 100% Duty Cycle Capable
  • Maximum Operating Frequency up to 2 MHz
  • Internal Soft-Start
  • Enable Pin

The LM3475 is a hysteretic P-FET buck controller designed to support a wide range of high efficiency applications in a very small SOT-23-5 package. The hysteretic control scheme has several advantages, including simple system design with no external compensation, stable operation with a wide range of components, and extremely fast transient response. Hysteretic control also provides high efficiency operation, even at light loads. The PFET architecture allows for low component count as well as 100% duty cycle and ultra-low dropout operation.

The LM3475 is a hysteretic P-FET buck controller designed to support a wide range of high efficiency applications in a very small SOT-23-5 package. The hysteretic control scheme has several advantages, including simple system design with no external compensation, stable operation with a wide range of components, and extremely fast transient response. Hysteretic control also provides high efficiency operation, even at light loads. The PFET architecture allows for low component count as well as 100% duty cycle and ultra-low dropout operation.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Tipo Título Fecha
* Data sheet LM3475 Hysteretic PFET Buck Controller datasheet (Rev. C) PDF | HTML 31 oct 2015
Analog Design Journal Control-Mode Quick Reference Guide (Rev. B) PDF | HTML 29 ago 2023
User guide LM3475 Buck Controller Evaluation Module User's Guide (Rev. B) PDF | HTML 09 feb 2022
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
User guide PMLK Buck Experiment Book (Rev. B) 21 abr 2017
User guide Cost Effective Test Methods Using PMLK BUCK Boards (Rev. A) 31 ago 2016
User guide PMLK Buck Experiment Book (Rev. A) 31 ago 2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM3475EVAL — Controlador reductor PFET histerético

The LM3475 evaluation board is provided as a tool for developing DC/DC converters based on the LM3475 IC. As shown in Figure 1, the evaluation board is configured to provide an output of 2.5V at up to 2A from an input up to 10V. The corresponding bill of material is given in Table 1. Typical (...)

Guía del usuario: PDF | HTML
Placa de evaluación

PMLKBUCKEVM — Placa de experimentación TI-PMLK Buck con TPS54160 y LM3475

The TI-PMLK Buck Experiment Board is part of the TI Power Management Lab Kit (TI-PMLK) series. TI-PMLK series provides hands on learning to reinforce power supply knowledge. The modular format allows users to customize the TI-PMLK series experience in a way that makes the most impact on (...)

Guía del usuario: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23 (DBV) 5 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos