Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)
Inicio
Gestión de la energía
Convertidores de CA/CC y CC/CC (FET integrado)

LM46002

ACTIVO

Convertidor de tensión reductor síncrono de 3.5 V a 60 V y 2A

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Este producto sigue estando disponible para los clientes existentes. Los nuevos diseños deben considerar un producto alternativo.
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LMR36520 ACTIVO Convertidor reductor síncrono SIMPLE SWITCHER® de 4,2 V a 65 V, 2 A con IQ de 26 uA Higher input voltage rating, easy to use SO-8 package and an FPWM option.
TLVM13620 ACTIVO Módulo reductor de 3.6 V a 36 V de entrada, 1 V a 6 V de salida, 2 A, en encapsulado de 4 mm x 6 mm  Smaller design with an integrated-inductor power module.

LM46002

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 2 Vin (min) (V) 3.5 Vin (max) (V) 60 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking Control mode current mode Vout (min) (V) 1 Vout (max) (V) 28 Iq (typ) (µA) 27 Duty cycle (max) (%) 99
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 2 Vin (min) (V) 3.5 Vin (max) (V) 60 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking Control mode current mode Vout (min) (V) 1 Vout (max) (V) 28 Iq (typ) (µA) 27 Duty cycle (max) (%) 99
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • 27-µA Quiescent current in regulation
  • High efficiency at light load (DCM and PFM)
  • Meets EN55022/CISPR 22 EMI standards
  • Integrated synchronous rectification
  • Adjustable frequency range: 200 kHz to 2.2 MHz (500 kHz default)
  • Frequency synchronization to external clock
  • Internal compensation
  • Stable with almost any combination of ceramic, polymer, tantalum, and aluminum capacitors
  • Power-good flag
  • Soft start into prebiased load
  • Internal soft start: 4.1 ms
  • Extendable soft-start time by external capacitor
  • Output voltage tracking capability
  • Precision enable to program system UVLO
  • Output short-circuit protection with hiccup mode
  • Overtemperature thermal shutdown protection
  • Create a custom design using the LM46002 with the WEBENCH® Power Designer
  • 27-µA Quiescent current in regulation
  • High efficiency at light load (DCM and PFM)
  • Meets EN55022/CISPR 22 EMI standards
  • Integrated synchronous rectification
  • Adjustable frequency range: 200 kHz to 2.2 MHz (500 kHz default)
  • Frequency synchronization to external clock
  • Internal compensation
  • Stable with almost any combination of ceramic, polymer, tantalum, and aluminum capacitors
  • Power-good flag
  • Soft start into prebiased load
  • Internal soft start: 4.1 ms
  • Extendable soft-start time by external capacitor
  • Output voltage tracking capability
  • Precision enable to program system UVLO
  • Output short-circuit protection with hiccup mode
  • Overtemperature thermal shutdown protection
  • Create a custom design using the LM46002 with the WEBENCH® Power Designer

The LM46002 regulator is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 2 A of load current from an input voltage ranging from 3.5 V to 60 V. The LM46002 provides exceptional efficiency, output accuracy and drop-out voltage in a very small solution size. An extended family is available in various load current options and 36-V maximum input voltage in pin-to-pin compatible packages, including LM46001, LM46000, LM43603, LM43602, LM43601 and LM43600. Peak-current-mode control is employed to achieve simple control-loop compensation and cycle-by-cycle current limiting. Optional features such as programmable switching frequency, synchronization, power-good flag, precision enable, internal soft start, extendable soft start, and tracking provide a flexible and easy-to-use platform for a wide range of applications. Discontinuous conduction and automatic frequency reduction at light loads improve light load efficiency. The family requires few external components. Pin arrangement allows simple, optimum PCB layout. Protection features include thermal shutdown, VCC undervoltage lockout, cycle-by-cycle current limit, and output short-circuit protection. The LM46002 device is available in the 16-lead HTSSOP / PWP package (6.6 mm × 5.1 mm × 1.2 mm) with 0.65-mm lead pitch.

space

space

space

space

The LM46002 regulator is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 2 A of load current from an input voltage ranging from 3.5 V to 60 V. The LM46002 provides exceptional efficiency, output accuracy and drop-out voltage in a very small solution size. An extended family is available in various load current options and 36-V maximum input voltage in pin-to-pin compatible packages, including LM46001, LM46000, LM43603, LM43602, LM43601 and LM43600. Peak-current-mode control is employed to achieve simple control-loop compensation and cycle-by-cycle current limiting. Optional features such as programmable switching frequency, synchronization, power-good flag, precision enable, internal soft start, extendable soft start, and tracking provide a flexible and easy-to-use platform for a wide range of applications. Discontinuous conduction and automatic frequency reduction at light loads improve light load efficiency. The family requires few external components. Pin arrangement allows simple, optimum PCB layout. Protection features include thermal shutdown, VCC undervoltage lockout, cycle-by-cycle current limit, and output short-circuit protection. The LM46002 device is available in the 16-lead HTSSOP / PWP package (6.6 mm × 5.1 mm × 1.2 mm) with 0.65-mm lead pitch.

space

space

space

space
filter Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 29
Tipo Título Fecha
* Data sheet LM46002 3.5-V to 60-V, 2-A Synchronous Step-Down Voltage Converter datasheet (Rev. C) PDF | HTML 05 abr 2019
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 25 mar 2024
Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 26 jul 2021
Selection guide Buck Converter Quick Reference Guide (Rev. B) 08 abr 2021
Application note Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) 12 mar 2019
Application note Differences Between LM4600x/LM4360x A and Non-A OPNs 27 mar 2018
White paper Synchronous Rectification in High-Performance Power Converter Design (Rev. A) 15 sep 2016
More literature SIMPLE SWITCHER Synchronous Regulator Series (Rev. B) 08 feb 2016
Technical article Inverting made simple by unleashing the buck PDF | HTML 19 may 2015
Application note Inverting Applications Made SIMPLE With LM4600x and LM4360x (Rev. B) 20 feb 2015
Application note Thermal Design Made Simple With LM43603 and LM46002 15 sep 2014
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 12 sep 2014
Application note Compensation Made SIMPLE With LM4360x, LM4600x 29 jul 2014
EVM User's guide LM46002 EVM User Guide 08 ago 2013
Application note AN-1533 Overvoltage Protection Circuit for Automotive Load Dump (Rev. B) 06 may 2013
Application note AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 06 may 2013
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 24 abr 2013
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 23 abr 2013
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 23 abr 2013
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 23 abr 2013
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 23 abr 2013
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 23 abr 2013
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 23 abr 2013
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 23 abr 2013
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 23 abr 2013
Application note Understanding and Applying Current-Mode Control Theory 19 ago 2007
Application note Input and Output Capacitor Selection 19 sep 2005
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 12 jul 2005
Application note AN-643 EMI/RFI Board Design (Rev. B) 03 may 2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM46002PWPEVM — Módulo de evaluación del convertidor reductor síncrono LM46002PWP

The Texas Instruments LM46002PWPEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM46002PWP, A 60V Synchronous Step-Down Converter. The EVM operates from a 3.5V to 60V input and provides a 5V output at 2A.

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

LM46002 PSpice Average Model

SNVM576.ZIP (88 KB) - PSpice Model
Descargar
Modelo de simulación

LM46002 PSpice Inverting Buck Boost and Non Inverting Buck Transient Model (Rev. C)

SNVM583C.ZIP (473 KB) - PSpice Model
Descargar
Modelo de simulación

LM46002 TINA-TI Transient Reference Design

SNVM606.TSC (87 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

LM46002 TINA-TI Transient Spice Model

SNVM610.ZIP (52 KB) - TINA-TI Spice Model
Descargar
Modelo de simulación

LM46002 Unencrypted Inverting and Non-inverting PSpice Transient Model (Rev. B)

SNVM729B.ZIP (7 KB) - PSpice Model
Descargar
Modelo de simulación

LM46002 Unencrypted PSpice Average Model

SNVM730.ZIP (1 KB) - PSpice Model
Descargar
Diseños de referencia

TIDA-00204 — Diseño de referencia de PHY Gigabit Ethernet de doble puerto y temperatura industrial compatible con

This design allows for performance evaluation of two industrial grade DP83867IR Gigabit Ethernet PHYs and Sitara™ host processors with integrated Ethernet MAC and Switch. It was developed to meet industrial requirements for EMI and EMC. The application firmware implements a driver for the (...)
Guía del usuario: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (PWP) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos