Inicio Gestión de la energía Controladores LED Drivers para pantallas LED
Inicio
Gestión de la energía
Controladores LED
Drivers para pantallas LED

TLC5921

ACTIVO

Controlador LED de 16 canales con velocidad de transferencia de datos de 20 MHz

Haga su pedido ahora
Hoja de datos

TLC5921

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Features LED Open Detection, ON/OFF LED Driver, Thermal shutdown Data transfer rate (typ) (MHz) 20 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -20 to 85
Features LED Open Detection, ON/OFF LED Driver, Thermal shutdown Data transfer rate (typ) (MHz) 20 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -20 to 85
HTSSOP (DAP) 32 89.1 mm² 11 x 8.1
  • Drive Capability and Output Counts
    • 80 mA (Current Sink) x 16 Bits
  • Constant Current Output Range
    • 1 to 80 mA ( Current Value Setting for All Output Terminals Using External Resistor)
  • Constant Current Accuracy
    • ±1% (Typ)
    • ±4% (Max) (Maximum Error Between Bits, All Bits On)
  • Voltage Applied to Constant Current Output Terminal
    • Minimum 0.6 V (Output Current 40 mA)
    • Minimum 1 V (Output Current 80 mA)
  • Data Input
    • Clock Synchronized 1 Bit Serial Input
  • Data Output
    • Clock Synchronized 1 bit Serial Output (With Timing Selection)
  • Input/Output Signal Level...CMOS Level
  • Power Supply Voltage...4.5 V to 5.5V
  • Maximum Output Voltage...17 V (Max)
  • Data Transfer Rate...20 MHz (Max)
  • Operating Free-Air Temperature Range
    -20°C to 85°C
  • Available in 32 Pin HTSSOP DAP Package (PD=3.9 W,
    TA = 25°C)
  • LOD Function...LED Open Detection
    (Error Signal Output at LED Disconnection)
  • TSD Function...Thermal Shutdown (Turn Output Off When Junction Temperature Exceeds Limit)
  • Drive Capability and Output Counts
    • 80 mA (Current Sink) x 16 Bits
  • Constant Current Output Range
    • 1 to 80 mA ( Current Value Setting for All Output Terminals Using External Resistor)
  • Constant Current Accuracy
    • ±1% (Typ)
    • ±4% (Max) (Maximum Error Between Bits, All Bits On)
  • Voltage Applied to Constant Current Output Terminal
    • Minimum 0.6 V (Output Current 40 mA)
    • Minimum 1 V (Output Current 80 mA)
  • Data Input
    • Clock Synchronized 1 Bit Serial Input
  • Data Output
    • Clock Synchronized 1 bit Serial Output (With Timing Selection)
  • Input/Output Signal Level...CMOS Level
  • Power Supply Voltage...4.5 V to 5.5V
  • Maximum Output Voltage...17 V (Max)
  • Data Transfer Rate...20 MHz (Max)
  • Operating Free-Air Temperature Range
    -20°C to 85°C
  • Available in 32 Pin HTSSOP DAP Package (PD=3.9 W,
    TA = 25°C)
  • LOD Function...LED Open Detection
    (Error Signal Output at LED Disconnection)
  • TSD Function...Thermal Shutdown (Turn Output Off When Junction Temperature Exceeds Limit)

The TLC5921 is a current-sink constant current driver incorporating shift register and data latch. The current value at constant current output can be set by one external register. The device also incorporates thermal shutdown (TSD) circuitry which turns constant current output off when the junction temperature exceeds the limit, and LED open detection (LOD) circuitry to report the LED was disconnected.

The TLC5921 is a current-sink constant current driver incorporating shift register and data latch. The current value at constant current output can be set by one external register. The device also incorporates thermal shutdown (TSD) circuitry which turns constant current output off when the junction temperature exceeds the limit, and LED open detection (LOD) circuitry to report the LED was disconnected.
filter Buscar otro/a Drivers para pantallas LED
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet LED Driver datasheet 28 sep 1999
White paper Common LED Functions and LED Driver Design Considerations 21 sep 2020
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Application note LED Driver--Paralleled Outputs Provide High Current Outputs 25 sep 2006

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (DAP) 32 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos