TLV320AIC33

ACTIVO

CÓDEC estéreo de baja potencia con 10 entradas, 7 salidas, amplificador de altavoz/auriculares y efe

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
NUEVO TAC5112 PRESENTACIÓN PRELIMINAR Low-power stereo audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC 10-dB better ADC SNR, 6-dB better DAC SNR, low-power and dual TDM, I2S, smaller 4mm x 4mm package

Detalles del producto

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Analog inputs 10 Analog outputs 7 Sampling rate (max) (kHz) 96 Rating Catalog Features Headset detect, Matrix mixing, Phase-locked loop (PLL), Stereo headphone amplifier ADC SNR (typ) (dB) 90 DAC SNR (typ) (dB) 100 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Analog inputs 10 Analog outputs 7 Sampling rate (max) (kHz) 96 Rating Catalog Features Headset detect, Matrix mixing, Phase-locked loop (PLL), Stereo headphone amplifier ADC SNR (typ) (dB) 90 DAC SNR (typ) (dB) 100 Operating temperature range (°C) -40 to 85
NFBGA (GVX) 80 25 mm² 5 x 5 NFBGA (ZXH) 80 25 mm² 5 x 5 VQFN (RGZ) 48 49 mm² 7 x 7
  • Stereo Audio DAC
    • 100-dBA Signal-to-Noise Ratio
    • 16/20/24/32-Bit Data
    • Supports Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-emphasis Effects
  • Stereo Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
  • Ten Audio Input Pins
    • Programmable in Single-Ended or Fully Differential Configurations
    • 3-State Capability for Floating Input Configurations
  • Seven Audio Output Drivers
    • Stereo 8-, 500-mW/Channel Speaker Drive Capability
    • Stereo Fully Differential or Single-Ended Headphone Drivers
    • Fully Differential Stereo Line Outputs
    • Fully Differential Mono Output
  • Low Power: 14-mW Stereo 48-kHz Playback With 3.3-V Analog Supply
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Record
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • Control Bus Selectable SPI or I2C
  • Audio Serial Data Bus Supports I2S, Left/Right-Justified, DSP, and TDM Modes
  • Alternate Serial PCM/I2S Data Bus for Easy Connection to Bluetooth™ Module
  • Digital Microphone Input Support
  • Extensive Modular Power Control
  • Power Supplies:
    • Analog: 2.7 V-3.6 V.
    • Digital Core: 1.65 V-1.95 V
    • Digital I/O: 1.1 V-3.6 V
  • Packages: 5 × 5 mm 80-VFBGA; 7 × 7 mm 48-QFN

MicroStar Junior is a trademark of Texas Instruments.
Bluetooth is a trademark of Bluetooth SIG, Inc.

  • Stereo Audio DAC
    • 100-dBA Signal-to-Noise Ratio
    • 16/20/24/32-Bit Data
    • Supports Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-emphasis Effects
  • Stereo Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
  • Ten Audio Input Pins
    • Programmable in Single-Ended or Fully Differential Configurations
    • 3-State Capability for Floating Input Configurations
  • Seven Audio Output Drivers
    • Stereo 8-, 500-mW/Channel Speaker Drive Capability
    • Stereo Fully Differential or Single-Ended Headphone Drivers
    • Fully Differential Stereo Line Outputs
    • Fully Differential Mono Output
  • Low Power: 14-mW Stereo 48-kHz Playback With 3.3-V Analog Supply
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Record
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • Control Bus Selectable SPI or I2C
  • Audio Serial Data Bus Supports I2S, Left/Right-Justified, DSP, and TDM Modes
  • Alternate Serial PCM/I2S Data Bus for Easy Connection to Bluetooth™ Module
  • Digital Microphone Input Support
  • Extensive Modular Power Control
  • Power Supplies:
    • Analog: 2.7 V-3.6 V.
    • Digital Core: 1.65 V-1.95 V
    • Digital I/O: 1.1 V-3.6 V
  • Packages: 5 × 5 mm 80-VFBGA; 7 × 7 mm 48-QFN

MicroStar Junior is a trademark of Texas Instruments.
Bluetooth is a trademark of Bluetooth SIG, Inc.

The TLV320AIC33 is a low power stereo audio codec with stereo headphone amplifier, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations. Extensive register- based power control is included, enabling stereo 48-kHz DAC playback as low as 14 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The record path of the TLV320AIC33 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC33 contains four high-power output drivers as well as three fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a capacitorless output configuration. In addition, paris of drivers can be used to drive 8-Ω speakers in a BTL configuration at 500 nW per channel.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to +59.5-dB analog gain for low-level microphone inputs.

The serial control bus supports SPI or I2C protocols, while the serial audio data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC33 operates from an analog supply of 2.7 V-3.6 V, a digital core supply of 1.65 V-1.95 V, and a digital I/O supply of 1.1 V-3.6 V. The device is available in 5 × 5-mm, 80-ball MicroStar Junior™ BGA and 7 × 7-mm, 48-lead QFN.

The TLV320AIC33 is a low power stereo audio codec with stereo headphone amplifier, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations. Extensive register- based power control is included, enabling stereo 48-kHz DAC playback as low as 14 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The record path of the TLV320AIC33 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC33 contains four high-power output drivers as well as three fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a capacitorless output configuration. In addition, paris of drivers can be used to drive 8-Ω speakers in a BTL configuration at 500 nW per channel.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to +59.5-dB analog gain for low-level microphone inputs.

The serial control bus supports SPI or I2C protocols, while the serial audio data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC33 operates from an analog supply of 2.7 V-3.6 V, a digital core supply of 1.65 V-1.95 V, and a digital I/O supply of 1.1 V-3.6 V. The device is available in 5 × 5-mm, 80-ball MicroStar Junior™ BGA and 7 × 7-mm, 48-lead QFN.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TLV320AIC3106 ACTIVO Códec estéreo de baja potencia con 10 entradas, 7 salidas, amplificador de auriculares y efectos dig Stereo Codec 102/92dB SNR DAC/ADC, up to 32 bit resolution, Se/Differential I/O

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 19
Tipo Título Fecha
* Data sheet Low Power Stereo Audio Codec for Portable Audio/Telephony datasheet (Rev. B) 12 nov 2008
* User guide PADC MicroStar BGA Discontinued and Redesigned 08 may 2022
Application note Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 31 dic 2019
Application note Audio Serial Interface Configurations for Audio Codecs (Rev. A) 27 jun 2019
Application note Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 28 oct 2013
Application note Audio Serial Interface Configurations for Audio Codecs 22 sep 2010
Application note Headset Detection for TLV320AIC33 and TLV320AIC310x Family 22 jun 2010
Application note Interfacing an I2S Device to an MSP430 Device (Rev. A) 22 mar 2010
Application note Solving Enumeration Errors in USB Audio DAC and CODEC Designs 30 oct 2009
Application note Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 08 jul 2009
Product overview TLV320AIC33/3106/34 Stereo Audio Converters 12 jun 2007
Application note TLV320AIC33 WinCE Driver 25 abr 2007
Application note Using TDM Function to Interface Four AIC33 CODECs with a Single Host Processor 05 jul 2006
Application note Using TLV320AIC3x Digital Audio Data Serial Interface w/TDM Support 05 jul 2006
EVM User's guide TLV320AIC33EVM - User Guide 28 nov 2005
Application note Using Digital Microphone Function on TLV320AIC33 with AIC33EVM/USB-MODEM System 28 nov 2005
Application note TLV320AIC3x WinCE 5.0 Drivers 27 sep 2005
Application note The Built-In AGC Function in TSC2100/2101 & TLV320AIC26/28/32/33 Devices 13 sep 2005
Application note How to Set the TSC/AIC EVM to Record & Playback Audio or Other Sound Through PC 14 dic 2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Controlador o biblioteca

TLV320AIC3XSW-LINUX — Controlador Linux para TLV320AIC3X

The Linux driver supports the TLV320AIC3x family of low-power stereo CODECs, and communication through the I2C bus and interfaces with the Linux Dynamic Audio Power Management for Portable Devices (DAPM) class.
Linux main line status

Available in Linux main line: Yes
Available through git.ti.com: N/A

(...)

Modelo de simulación

TLV320AIC33 IBIS Model (Rev. A)

SLAC207A.ZIP (15 KB) - IBIS Model
Herramienta de cálculo

COEFFICIENT-CALC Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

Productos y hardware compatibles

Productos y hardware compatibles

Productos
CODEC de audio
TLV320AIC26 ADC mono de baja potencia/ADC estéreo con amplificador de auriculares/altavoz y ADC de medición de 1 TLV320AIC28 ADC de baja potencia/ADC estéreo con amplificador de auriculares/altavoz y 6 entradas de audio TLV320AIC29 ADC de baja potencia/ADC estéreo con amplificador de auriculares/altavoz y 6 entradas de audio TLV320AIC3007 CÓDEC estéreo de baja potencia con amplificador de clase D integrado TLV320AIC31 Códec estéreo de baja potencia con 6 entradas, 6 salidas, amplificadores de auricular/altavoz integr TLV320AIC3100 Códec de audio de baja potencia con procesamiento de audio y amplificador mono clase D TLV320AIC3101 Códec estéreo de baja potencia con 6 entradas, 6 salidas, amplificador de altavoz/auriculares y efec TLV320AIC3104 CÓDEC estéreo de baja potencia con 6 entradas, 6 salidas, amplificador de altavoz/auriculares y efec TLV320AIC3105 CÓDEC estéreo de baja potencia con 6 entradas, 6 salidas, amplificador de altavoz/auriculares y efec TLV320AIC3106 Códec estéreo de baja potencia con 10 entradas, 7 salidas, amplificador de auriculares y efectos dig TLV320AIC3107 CÓDEC estéreo de baja potencia con amplificador mono de clase D integrado TLV320AIC3110 Códec de audio de baja potencia con amplificador de 1.3 W de altavoz estéreo de clase D TLV320AIC3111 CÓDEC de audio de baja potencia con miniDSP integrado y amplificador de altavoz estéreo de clase D TLV320AIC3120 CÓDEC de audio de baja potencia con miniDSP y amplificador de altavoz mono de clase D de 2.5 W TLV320AIC32 CÓDEC estéreo de baja potencia con 6 entradas, 6 salidas, amplificador de altavoz/auricular y efecto TLV320AIC3204 CÓDEC de audio estéreo de muy baja potencia con tecnología PowerTune™ TLV320AIC3206 Códec estéreo de muy baja potencia con DirectPath™; amplificador de auriculares TLV320AIC3254 CÓDEC de audio estéreo de muy baja potencia con miniDSP programable TLV320AIC3256 Códec estéreo de muy baja potencia con miniDSP y DirectPath™; amplificador de auriculares TLV320AIC33 CÓDEC estéreo de baja potencia con 10 entradas, 7 salidas, amplificador de altavoz/auriculares y efe TLV320AIC34 CÓDEC de 4 canales de baja potencia TSC2100 Controlador de pantalla táctil de 4 cables con DAC estéreo/ADC mono con amplificador de auriculares/ TSC2101 Controlador de pantalla táctil de 4 cables con DAC estéreo/ADC mono con amplificador de auriculares/ TSC2102 Controlador de pantalla táctil de 4 cables con DAC estéreo con amplificador de auriculares TSC2117 Controlador de pantalla táctil de 4 cables con ADC mono/DAC estéreo de baja potencia TSC2301 Controlador de pantalla táctil de 4 cables, CÓDEC estéreo con amplificador de auriculares (interfaz
ADC de audio
TLV320ADC3001 ADC estéreo de baja potencia SNR de 92 dB (ADC3001) TLV320ADC3101 ADC estéreo de baja potencia SNR de 92 dB con soporte para micrófono digital y miniDSP
Amplificadores para altavoces
TAS2505 Amplificador de audio de clase D de 2 W, entrada analógica, digital y mono con procesamiento de audi TAS2505-Q1 Amplificador de clase D de 2 W, mono, con entrada digital o analógica y procesamiento de audio autom TAS2521 Amplificador de audio de clase D de 2 W, con entrada analógica, digital y mono con controlador de au
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
NFBGA (GVX) 80 Ultra Librarian
NFBGA (ZXH) 80 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos