Herramienta de diseño
TPA3244
Amplificador de audio estéreo de 60 W y mono de 120 W, Clase D, entrada analógica y alimentación de
Hoja de datos
TPA3244
- Differential Analog Inputs
- Total Output Power at 10%THD+N
- 60-W Stereo Continuous into 8 Ω in BTL Configuration at 30 V
- 110-W Stereo Peak into 4 Ω in BTL Configuration at 30 V
- Total Output Power at 1%THD+N
- 50-W Stereo Continuous into 8 Ω in BTL Configuration at 30 V
- 90-W Stereo Peak into 4 Ω in BTL Configuration at 30 V
- Advanced Integrated Feedback Design with High-speed Gate Driver Error Correction
(PurePath™ Ultra-HD)- Signal Bandwidth up to 100 kHz for High Frequency Content From HD Sources
- Ultra Low 0.005% THD+N at 1 W into 4 Ω and <0.01% THD+N to Clipping
- 60 dB PSRR (BTL, No Input Signal)
- <55 µV (A-Weighted) Output Noise
- >110 dB (A Weighted) SNR
- Multiple Configurations Possible:
- Stereo, Mono, 2.1 and 4xSE
- Click and Pop Free Startup and Stop
- 94% Efficient Class-D Operation (8 Ω)
- Wide 12-V to 30-V Supply Voltage Operation
- Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and Short Circuit Protection) With Error Reporting
- EMI Compliant When Used With Recommended System Design
The TPA3244 device is a high performance Class-D power amplifier that enables true premium sound quality with Class-D efficiency. It features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality. With a 30-V power supply the device can drive up to 2 x 110 W peak into 4-Ω load and 2 x 60 W continuous into 8-Ω load and features a 2-VRMS analog input interface that works seamlessly with high performance DACs such as Burr-Brown PCM52xx DAC Family from TI (that is, PCM5242 / PCM5252). In addition to excellent audio performance, TPA3244 achieves both high power efficiency and very low power stage idle losses below 0.45 W. This is achieved through the use of 65 mΩ MOSFETs and an optimized gate driver scheme that achieves significantly lower idle losses than typical discrete implementations.
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12 | Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TPA3244 60-W Stereo, 110-W peak PurePath™ Ultra-HD Pad Down Class-D Amplifier datasheet (Rev. A) | PDF | HTML | 17 nov 2016 |
| Application note | TPA324x and TPA325x Post-Filter Feedback (Rev. A) | 07 mar 2018 | ||
| More literature | High-Power Audio Amplifiers TPA322x/4x/5x | 01 dic 2017 | ||
| Application note | Multi-Device Configuration for TPA32xx Amplifiers | 27 sep 2017 | ||
| More literature | TI Automotive External Amplifiers (Rev. A) | 03 feb 2017 | ||
| More literature | TI Powered Speakers (Rev. A) | 31 ene 2017 | ||
| Application note | Class-D Amplifier External Load Diagnostics | 23 ene 2017 | ||
| Application note | LC Filter Design (Rev. A) | 09 nov 2016 | ||
| EVM User's guide | TPA3244 Evaluation Module User's Guide | 09 nov 2016 | ||
| User guide | TPA3244EVM Quick Start Guide | 25 oct 2016 | ||
| Application note | TPA32xx Analog Input Grounding for Single Ended Inputs | PDF | HTML | 26 ago 2016 | |
| More literature | High-Power Audio Amplifiers | 14 jul 2016 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
SIDEGIG-GUITAREVM — Módulo complementario Guitar SideGig
The TI Guitar SideGig plug-in module turns TI Audio Class-D amplifier EVM’s into a guitar, bass or musical instrument amplifier. The board features selectable “clean” and “drive” channels for traditional and overdriven guitar sounds. The clean channel offers volume, (...)
Guía del usuario: PDF
Placa de evaluación
SIDEGIG-PROTOEVM — Módulo complementario de audio prototipo
The TI Prototype Audio Plug-in Module turns TI Audio Class-D amplifier EVM’s into your sandbox. Need to prototype a pre-amplifier circuit or test an opamp with TI Class-D EVMs, then start with the DIY Audio Plug-in Module.
Start your prototype on the included breadboard or solder directly to the (...)
Start your prototype on the included breadboard or solder directly to the (...)
Guía del usuario: PDF
Placa de evaluación
SIDEGIG-XOVEREVM — Módulo complementario de audio cruzado activo analógico
The TI Analog, Active Crossover Audio Plug-in Module turns TI Audio Class-D amplifier EVM’s into a high quality, two-way speaker amplifier. The plug-in module makes it easy to remove the large and expensive passive crossover found in passive loudspeakers and create a biamped, two-way (...)
Guía del usuario: PDF
Placa de evaluación
TPA3244EVM — Módulo TPA3244 de Clase D, botón hacia abajo, entrada analógica de audio ultra HD con pico de 110 W/
The TPA3244EVM Ultra-HD evaluation module demonstrates the TPA3244DDW integrated circuit from Texas Instruments. The TPA3244DDW is a high-performance class-D amplifier that enables true premium sound quality with high efficiency class-D technology. It features an advanced integrated feedback (...)
Guía del usuario: PDF
Herramienta de simulación
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Diseños de referencia
TIDA-01414 — Diseño de referencia de barra de sonido TPA3244 Dolby Atmos
The TPA3244 Dolby Atmos® Soundbar Reference Design combines Ultra-HD audio and high dynamic range to create room filling audio experience from a small form factor system. The design leverages TI's high-performance TPA3244 amplifier, PCM5252 high-performance DAC with processing, and an (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| HTSSOP (DDW) | 44 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.