제품 상세 정보

Number of series cells 1 Charge current (max) (A) 6 Vin (max) (V) 14 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.775 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface I2C Features IC thermal regulation, IINDPM (Input current limit), Input OVP, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 6 Vin (max) (V) 14 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.775 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface I2C Features IC thermal regulation, IINDPM (Input current limit), Input OVP, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YFF) 36 1.4000000000000001 mm² 1 x 1.4000000000000001
  • Parallel charger operation provides fast charging in dual charger configuration
  • High efficiency 750-kHz switch mode three-level buck parallel charger
    • Reduced ripple to support low profile inductor
    • 95.4% Charge efficiency at 1.5 A from 5-V input
    • 93.3% Charge efficiency at 3 A from 9-V input
    • Superior efficiency compared to traditional buck converter in compact form factor
  • Single Input to support USB input and adjustable high voltage adapters
    • Support 3.9-V to 14-V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.6 A with 100-mA resolution) to support USB2.0 and USB 3.0 standard and high voltage adaptors
    • Maximum power tracking by input voltage limit (VINDPM) up to 14 V
  • Flexible I2C mode for optimal system performance
  • High integration includes all MOSFETs, current sensing and loop compensation
    • Lossless charge current sensing without sense resistor
  • < 10-µA Low battery leakage current during stand-by mode
  • High accuracy
    • ±0.4% Charge voltage regulation
    • ±10% Charge current regulation
    • ±7.5% Input current regulation
    • Remote differential battery sensing
  • Safety
    • Thermal regulation and thermal shutdown
    • Input UVLO and overvoltage protection
    • Battery OVP
    • Input dynamic power management (DPM)
    • Charging safety timer
    • Flying capacitor short circuit protection
    • Output voltage short circuit protection
  • Available in 36-ball WCSP package
  • Parallel charger operation provides fast charging in dual charger configuration
  • High efficiency 750-kHz switch mode three-level buck parallel charger
    • Reduced ripple to support low profile inductor
    • 95.4% Charge efficiency at 1.5 A from 5-V input
    • 93.3% Charge efficiency at 3 A from 9-V input
    • Superior efficiency compared to traditional buck converter in compact form factor
  • Single Input to support USB input and adjustable high voltage adapters
    • Support 3.9-V to 14-V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.6 A with 100-mA resolution) to support USB2.0 and USB 3.0 standard and high voltage adaptors
    • Maximum power tracking by input voltage limit (VINDPM) up to 14 V
  • Flexible I2C mode for optimal system performance
  • High integration includes all MOSFETs, current sensing and loop compensation
    • Lossless charge current sensing without sense resistor
  • < 10-µA Low battery leakage current during stand-by mode
  • High accuracy
    • ±0.4% Charge voltage regulation
    • ±10% Charge current regulation
    • ±7.5% Input current regulation
    • Remote differential battery sensing
  • Safety
    • Thermal regulation and thermal shutdown
    • Input UVLO and overvoltage protection
    • Battery OVP
    • Input dynamic power management (DPM)
    • Charging safety timer
    • Flying capacitor short circuit protection
    • Output voltage short circuit protection
  • Available in 36-ball WCSP package

The BQ25910 is an integrated three-level switch-mode parallel battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter maintains highest switch-mode operation efficiency while reducing solution footprint and increasing power density. The device supports fast charging with high input voltage for a wide range of portable devices. The solution integrates reverse-blocking FET (QBLK), and four switching FETs (QHSA, QHSB, QLSB, QLSA). The I2C serial interface with charging and system settings makes the device a truly flexible solution.

The BQ25910 is an integrated three-level switch-mode parallel battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter maintains highest switch-mode operation efficiency while reducing solution footprint and increasing power density. The device supports fast charging with high input voltage for a wide range of portable devices. The solution integrates reverse-blocking FET (QBLK), and four switching FETs (QHSA, QHSB, QLSB, QLSA). The I2C serial interface with charging and system settings makes the device a truly flexible solution.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
4개 모두 보기
유형 직함 날짜
* Data sheet BQ25910 I2C Controlled 6-A Three-Level Switch Mode, Single-Cell Parallel Battery Charger for Fast Charging datasheet (Rev. B) PDF | HTML 2019/07/29
Technical article How to increase charging current while shrinking overall solution size for portabl PDF | HTML 2018/03/01
EVM User's guide bq25910EVM-854 Evaluation Module User's Guide (Rev. A) 2018/03/01
Analog Design Journal Faster, cooler charging with dual chargers 2015/10/30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BQ25910EVM-854 — bq25910 3레벨 단일 셀 슬레이브 충전기용 평가 모듈

The bq25910 is an integrated three-level switch-mode slave battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter reduces solution footprint and volume while maintaining highest switch-mode operation efficiency.
사용 설명서: PDF
TI.com에서 구매 불가
계산 툴

SLVC715 bq25910 Calculation Tool

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
배터리 충전기 IC
BQ25910 병렬 충전 애플리케이션용 I2C 1셀 6A 3레벨 벅 배터리 충전기
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFF) 36 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상