지원 소프트웨어
DIGITALTEMPSENSORSEVM-SW — Eval Board Software for Hardware Monitors and Digital Temp Sensors
Evaluation Board Software for Hardware Monitors and Digital Temperature Sensors
LM90
- Accurately Senses Die Temperature of Remote ICs or Diode Junctions
- Offset Register Allows Sensing a Variety of Thermal Diodes Accurately
- On-board Local Temperature Sensing
- 10 Bit Plus Sign Remote Diode Temperature Data Format, 0.125°C Resolution
- Diode Fault Detection Circuitry
- T_CRIT_A Output Useful for System Shutdown (Open Diode does not Activate T_CRIT_A)
- ALERT Output Supports SMBus 2.0 Protocol
- SMBus 2.0 Compatible Interface, Supports TIMEOUT
- 8-pin VSSOP Package
Key Specifications
- Supply Voltage 3.0 to 3.6 V
- Supply Current 0.8 mA (Typ)
- Local Temp Accuracy (Includes Quantization Error)
- TA=25°C to 125°C, ±4.0 °C (Max)
- Remote Diode Temp Accuracy (Includes Quantization Error)
- TA=30°C to 50°C, TD=60°C to 100°C, ±3.0 °C (Max)
- TA=0°C to 85°C, TD=25°C to 125°C, ±4.0 °C (Max)
The LM90 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) serial interface. The LM90 accurately measures its own temperature as well as the temperature of an external device, such as processor thermal diode or diode connected transistor such as the 2N3904. The temperature of any ASIC can be accurately determined using the LM90 as long as a dedicated diode (semiconductor junction) is available on the target die. The LM90 remote sensor accuracy of ±3°C is factory trimmed for the 1.008 typical non-ideality factor of the mobile Pentium III thermal diode. The LM90 has an Offset register to allow measuring other diodes without requiring continuous software management.
Activation of the ALERT output occurs when any temperature goes outside a preprogrammed window set by the HIGH and LOW temperature limit registers or exceeds the T_CRIT temperature limit. Activation of the T_CRIT_A occurs when any temperature exceeds the T_CRIT programmed limit. The LM90 is pin and register compatible with the LM86, Analog Devices ADM1032 and Maxim MAX6657/8.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM90 +-;3C Accurate, Remote Diode & Local Dig Temp Sensor w/2-Wire Interface datasheet (Rev. A) | 2013/03/25 | |
| User guide | LM86, LM89, LM89-1, LM90, LM99, LM99-1 Evaluation Board User’s Guide | 2012/02/29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
드라이버 또는 라이브러리
LM90SW-LINUX — LM90용 Linux 드라이버
The Linux driver supports the LM90 series of Remote and Local Temp Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline Status
Available in Linux Main line: Yes
Available through git.ti.com: N/A
Supported Devices:
- (...)
지원 소프트웨어
SENSOREVAL — Eval Board Software For Hardware Monitors And Digital Temperature Sensors
SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.
- Download SensorEval Software and Manual
- Windows XP support is offered for (...)
지원되는 제품 및 하드웨어
제품
디지털 온도 센서
정밀 ADC
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치