데이터 시트
TPS560200
- Integrated Monolithic 0.95-Ω High-Side and 0.33-Ω
Low-Side MOSFETs - 500-mA Continuous Output Current
- Output Voltage Range: 0.8 V to 6.5 V
- 0.8-V Voltage Reference With ±1.3% Accuracy
Over Temperature - Auto-Skip Advanced Eco-Mode for High
Efficiency at Light Loads - D-CAP2™ Mode Enables Fast Transient
Responses - No External Compensation Needed
- 600-kHz Switching Frequency
- 2-ms Internal Soft-Start
- Safe Start-Up into Prebiased VOUT
- Thermal Shutdown
- –40°C to 125°C Operating Junction Temperature
Range - Available in 5-Pin SOT-23 Package
The TPS560200 is an 17-V, 500-mA, low-Iq, adaptive on-time D-CAP2 mode synchronous monolithic buck converter with integrated MOSFETs in easy-to-use 5-pin SOT-23 package.
The TPS560200 lets system designers complete the suite of various end-equipment power bus regulators with a cost-effective, low component count and low standby current solution. The main control loop for the device uses the D-CAP2 mode control that provides a fast transient response with no external compensation components. The adaptive on-time control supports seamless transition between PWM mode at higher load conditions and advanced Eco-Mode operation at light loads.
The TPS560200 also has a proprietary circuit that enables the device to adopt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 17-V VIN input. The output voltage can be programmed between 0.8 V and 6.5 V. The device also features a fixed 2-ms soft-start time. The device is available in the 5-pin SOT-23 package.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS560200 4.5-V to 17-V Input, 500-mA Synchronous Step-Down Converter With Advanced Eco-Mode™ datasheet (Rev. C) | PDF | HTML | 2016/02/10 |
| Selection guide | Buck Converter Quick Reference Guide (Rev. B) | 2021/04/08 | ||
| Selection guide | SWIFT DC/DC Converters Selector Guide (Rev. G) | 2019/02/06 | ||
| Application note | SOT23 Package Thermal Consideration | 2018/03/02 | ||
| User guide | TPS560200EVM-537 0.5-A, Single Channel Regulator Evaluation Module | 2013/09/06 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TPS560200EVM-537 — 500-mA 동기 스텝다운 컨버터 평가 모듈
The Texas Instruments TPS560200EVM-537 evaluation module (EVM) helps design engineers evaluate the operation and performance of the TPS560200 Synchronous Step-Down Converter. The EVM comprises a nominal 12 V input, 1.05 V output synchronous buck converter. Output current is rated at 0.5 A. The (...)
사용 설명서: PDF
시뮬레이션 모델
TPS560200 Unencrypted PSpice Transient Model Package (Rev. A)
SLVMBA4A.ZIP (115 KB) - PSpice Model
레퍼런스 디자인
PMP10215 — 클래스 D 증폭기를 위한 3.3V, 12V, 36V, 200W 지속 PSU 범용 입력 레퍼런스 디자인
This power module generates all voltages to supply a class-D audio amplifier. The main output voltage is 36V and delivers 200W continuously and 840W peak. The first stage is a power-factor corrected Boost. A Flyback converter supplies 12V on primary side as well as 12V@300mA and 3.3V@200mA on (...)
레퍼런스 디자인
PMP8740 — 92%의 전부하 효율을 지원하는 2kW 산업용 AC/DC 배터리 충전기 레퍼런스 설계
This reference design is a module that can be set as standard power supply or a battery charger. The output voltage ranges from 0 V to 32 V at a maximum current of 62.5 A. It consists of four boards, a boost PFC, a phase shift full bridge, a small daughter board (hosting the microcontroller), and (...)
레퍼런스 디자인
TIDA-01013 — DAQ 및 무선 센서 IoT 시스템을 위한 저전력, 저잡음 24b 아날로그 프론트 엔드 레퍼런스 디자인
The need for lower power, lower noise analog front-ends (AFE) is becoming increasingly important in many applications today, such as data acquisition systems (DAQs), field instrumentation, Internet-of-Things (IoT), and automatic test equipment. In many cases, this need is highlighted by the advent (...)
레퍼런스 디자인
TIDA-010055 — 보호 릴레이 모듈을 위한 진단 기능이 포함된 비절연 전원 아키텍처 레퍼런스 설계
This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
레퍼런스 디자인
TIDA-00202 — HIPERFACE 위치 인코더 인터페이스 레퍼런스 디자인
The TIDA-00202 reference design implements an EMC compliant industrial hybrid analog and digital interface to a HIPERFACE position encoder. A 3.3V supply RS485 transceiver with IEC-ESD and IEC-EFT protection is used for the bidirectional parameter channel. For the analog sin/cos signal (...)
레퍼런스 디자인
PMP30183 — 클래스 D 증폭기 3.3V, 12V, 30V 범용 입력, 200W 지속 PSU 레퍼런스 설계
This power reference design generates all voltages to supply a class-D audio amplifier. The main output voltage is 30V and delivers 200W continuously and 750W peak. The first stage is a power-factor corrected Boost. A Flyback converter supplies 12V on primary side as well as 12V@300mA and (...)
레퍼런스 디자인
PMP12082 — 3상 AC 입력, 삼중 출력 바이어스 전원 레퍼런스 디자인
The PMP12082 is a bias supply reference design with 3-phase input (80VAC~280VAC) and triple outputs - 7V/1.4A, 3.3V/500mA, and 3.3V/300mA. UCC28701 primary side regulation controller is applied for a Cascode-MOSFET flyback converter with dual output windings. One winding supplies 7V/1.4A output (...)
레퍼런스 디자인
PMP10110 — PFC를 지원하는 범용 AC 입력 30Vmax의 6A 납산 배터리 충전기 레퍼런스 디자인
The PMP10110 design converts the universal input AC voltage to isolated 17V...30V@6A and is suitable to charge lead-acid or Li-Ion batteries. The converter is a constant-V and constant-I genarator and the set points for output voltage (charge level) and current are settable by means of two PWM (...)
레퍼런스 디자인
PMP10600 — Xilinx® Zynq® 7000 시리즈(XC7Z015) 전원 솔루션, 5W - 레퍼런스 디자인
The PMP10600.1 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator. It also features one LM3880 for power up and power (...)
레퍼런스 디자인
PMP10601 — Xilinx® Zynq® 7000 시리즈(XC7Z015) 전원 솔루션, 8W - 레퍼런스 디자인
The PMP10601 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. It also (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치