TPS92629-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to 125°C, T A
- Wide input voltage range: 4.5 V to 40 V
- Thermal sharing by external shunt resistor
- Low quiescent current
- 10 uA with EN low in shutdown mode
- Low supply current in fault mode
- Single-channel high-precision current regulation:
- Up to 250-mA output channel current
- Integrated analog dimming and PWM dimming control
- ±5% accuracy under PWM dimming mode over full temperature range
- ±5% accuracy under analog dimming mode for 20%~100% maximum current over full temperature range
- ±10% accuracy under analog dimming mode for 10%~20% maximum current over full temperature range
- Low dropout voltage:
- Maximum dropout: 350 mV for 150 mA
- Maximum dropout: 500 mV for 250 mA
- Diagnostics and protection
- LED open-circuit with auto-recovery
- LED short-to-GND with auto-recovery
- LED short-to-battery with auto-recovery
- Diagnostic enable with adjustable threshold for low-dropout operation
- More safe system with multiple fault report capability
- Thermal shutdown
- Operation junction temperature range: –40°C to 150°C
The TPS92629-Q1 single-channel LED driver includes a unique thermal management design to reduce temperature rising on the device. The TPS92629-Q1 is a linear driver directly powered by automotive batteries with large voltage variations to output full current loads up to 250 mA. External shunt resistors are leveraged to share output current and dissipate power out of the driver. The devices full-diagnostic capabilities include LED open, LED short-to-GND, LED short-to-battery circuit and device overtemperature protection. The high accuracy and optimized slew rate of analog dimming control supports off board long wire driving with enhanced EMC performance and eliminates the flick and afterimage issue. The multiple fault could be reported out by different voltage levels through fault pins for safety critical applications.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPS92629-Q1 Single-Channel, Automotive High Side LED Driver With Thermal Sharing Control datasheet | PDF | HTML | 2022/01/18 |
Certificate | TPS92629Q1EVM EU RoHS Declaration of Conformity (DoC) | 2022/10/10 | ||
EVM User's guide | TPS92629Q1EVM User's Guide | PDF | HTML | 2022/09/28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS92629Q1EVM — TPS92629-Q1 열 공유를 지원하는 싱글 채널 40V 고압측 LED 드라이버용 평가 모듈
TPS92629Q1EVM은 차량용 조명 애플리케이션을 위한 완전한 LED 진단을 지원하는 선형 단일 채널 LED 드라이버인 TPS92629-Q1의 작동과 성능을 평가합니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
HVSSOP (DGN) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.