Home Power management USB power switches & charging port controllers
Home
Power management
USB power switches & charging port controllers

TPS2550

NOT RECOMMENDED FOR NEW DESIGNS

Adjustable, active-low, constant-current, current-limited power-distribution switch

Order now
Data sheet
TPS2550 is not recommended for new designs
This product continues to be available for existing customers. New designs should consider an alternate product.
open-in-new Compare alternates
Same functionality with different pin-out to the compared device
TPS2552 ACTIVE 0.075-1.7A adj. ILIMIT, 2.5-6.5V, 85mΩ USB power switch, active-low, reverse blocking This product is more accurate, SBS 1.1 Compliant, has faster communication capability and has a maintained design environment.

TPS2550

NOT RECOMMENDED FOR NEW DESIGNS
Data sheet Order now

Product details

Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.1 Current limit (A) 0.1 to 1.1 Operating temperature range (°C) -40 to 85 Enable Active Low Number of switches 1 Current limit accuracy at 1 A 30% (700mA min / 1300mA max) Rating Catalog
Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.1 Current limit (A) 0.1 to 1.1 Operating temperature range (°C) -40 to 85 Enable Active Low Number of switches 1 Current limit accuracy at 1 A 30% (700mA min / 1300mA max) Rating Catalog
  • Adjustable current-limit, 100 mA–1100 mA
  • Fast overcurrent response - 2 µS typical
  • 94-mΩ high-side MOSFET (DBV package)
  • Reverse input-output voltage protection
  • Operating range: 2.5 V to 6.5 V
  • Deglitched fault report
  • 1-µA maximum standby supply current
  • Junction temperature range: –40°C to 125°C
  • Built-in soft-start
  • 15 kV ESD protection (with external capacitance)
  • UL listed – file No. E169910
  • Current-limit resistor calculator – SLVC163
  • Adjustable current-limit, 100 mA–1100 mA
  • Fast overcurrent response - 2 µS typical
  • 94-mΩ high-side MOSFET (DBV package)
  • Reverse input-output voltage protection
  • Operating range: 2.5 V to 6.5 V
  • Deglitched fault report
  • 1-µA maximum standby supply current
  • Junction temperature range: –40°C to 125°C
  • Built-in soft-start
  • 15 kV ESD protection (with external capacitance)
  • UL listed – file No. E169910
  • Current-limit resistor calculator – SLVC163

The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 mA and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.

The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.

The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 mA and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.

The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.
filter Find other USB power switches & charging port controllers
Download

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet TPS255x Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. C) PDF | HTML 09 Oct 2023

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location