首頁 馬達驅動器 步進馬達驅動器
首頁
馬達驅動器
步進馬達驅動器

DRV8818

現行

具電流調節與 1/8 微步進的 35-V、2.5-A 雙極步進馬達驅動器

立即訂購
產品規格表

DRV8818

現行
產品規格表 立即訂購

產品詳細資料

Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 35 Full-scale current (A) 2.5 Peak output current (A) 3.5 RDS(ON) (HS + LS) (mΩ) 370 Sleep current (µA) 3 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 8 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 35 Full-scale current (A) 2.5 Peak output current (A) 3.5 RDS(ON) (HS + LS) (mΩ) 370 Sleep current (µA) 3 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 8 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Pulse Width Modulation (PWM) Microstepping Motor Driver
    • Built-In Microstepping Indexer
    • Up to 8 Microsteps/Step
    • Step and Direction Control
    • Programmable Mixed Decay, Blanking, and Off Time
  • Up to 2.5-A Current Per Winding
  • Low 0.37-Ω (HS + LS) MOSFET RDS(ON) (25°C)
  • 8-V to 35-V Operating Supply Voltage Range
  • Pin to Pin Upgrade for DRV8811 With Lower RDS(ON)
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
  • Pulse Width Modulation (PWM) Microstepping Motor Driver
    • Built-In Microstepping Indexer
    • Up to 8 Microsteps/Step
    • Step and Direction Control
    • Programmable Mixed Decay, Blanking, and Off Time
  • Up to 2.5-A Current Per Winding
  • Low 0.37-Ω (HS + LS) MOSFET RDS(ON) (25°C)
  • 8-V to 35-V Operating Supply Voltage Range
  • Pin to Pin Upgrade for DRV8811 With Lower RDS(ON)
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)

The DRV8818 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor.

The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings.

A simple STEP/DIRECTION interface allows easy interfacing to controller circuits. The mode pins allow for configuration of the motor in full-step, half-step, quarter-step, or eighth-step modes. Decay mode and PWM off time are programmable.

Internal shutdown functions are provided for over current protection, short circuit protection, under-voltage lockout and overtemperature.

The DRV8818 is packaged in a 28-pin HTSSOP package with PowerPAD.

The DRV8818 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor.

The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings.

A simple STEP/DIRECTION interface allows easy interfacing to controller circuits. The mode pins allow for configuration of the motor in full-step, half-step, quarter-step, or eighth-step modes. Decay mode and PWM off time are programmable.

Internal shutdown functions are provided for over current protection, short circuit protection, under-voltage lockout and overtemperature.

The DRV8818 is packaged in a 28-pin HTSSOP package with PowerPAD.
filter 尋找其它 步進馬達驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
DRV8424 現行 具整合式電流感測與 1/256 微型步進的 35-V、2.5-A 雙極步進驅動器 DRV8424 is a newer device with integrated current sensing, smart tuning, high microstepping, P2P scalable family & smooth quiet motion
DRV8434 現行 具整合式電流感測與 1/256 微型步進的 48-V、2.5-A 雙極步進馬達驅動器 DRV8434 is a newer device with integrated current sensing, smart tuning, P2P scalable family and smooth quiet motion
功能與所比較的裝置相似
DRV8886 現行 具有整合式電流感測與 2/16 微型步進的 37-V、1-A 雙極步進馬達驅動器 The DRV8886 includes Integrated Current Sensing for 24V applications

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet DRV8818 Stepper Motor Controller IC datasheet (Rev. E) PDF | HTML 2016年 1月 19日
Application note How to Reduce Power Consumption in Stepper Motor Drivers Using Holding Torque PDF | HTML 2024年 8月 16日
Application note Understanding Motor Driver Current Ratings (Rev. A) PDF | HTML 2024年 7月 5日
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021年 10月 14日
Application note Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
Application note Current Recirculation and Decay Modes (Rev. A) PDF | HTML 2021年 4月 20日
Application note Intelligent Stepper Motor Driver (Rev. B) PDF | HTML 2021年 1月 20日
Application note Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
Application note High Resolution Microstepping Driver With the DRV88xx Series (Rev. A) PDF | HTML 2020年 12月 21日
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
EVM User's guide DRV8818 EVM GUI (Rev. A) 2017年 4月 27日
More literature TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
Analog Design Journal Applying acceleration and deceleration profiles to bipolar stepper motors 2012年 7月 17日
Application brief PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8818EVM — DRV8818 評估模組

The DRV8818 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8818 integrated micro-stepping motor driver from Texas Instruments. This EVM comes with an on-board MSP430 microprocessor which has been pre-programmed for standalone operation. The regulated voltage for the (...)

使用指南: PDF
TI.com 無法提供
支援軟體

SLVC415 — DRV8818 Software

支援產品和硬體

支援產品和硬體

產品
步進馬達驅動器
DRV8818 — 具電流調節與 1/8 微步進的 35-V、2.5-A 雙極步進馬達驅動器
硬體開發
開發板
DRV8818EVM — DRV8818 評估模組
下載
配置圖

DRV8818EVM Hardware and Programming Files (Rev. A)

SLVC588A.ZIP (13443 KB)
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片