ESD351
- IEC 61000-4-2 Level 4 ESD Protection
- ±30-kV Contact Discharge
- ±30-kV Air Gap Discharge
- IEC 61000-4-4 EFT Protection
- 80 A (5/50 ns)
- IEC 61000-4-5 Surge Protection
- 6 A (8/20 µs)
- IO Capacitance: 1.8 pF (Typical)
- DC Breakdown Voltage: 4.5 V (Minimum)
- Low Leakage Current: 0.1 nA (Typical)
- Extremely Low ESD Clamping Voltage
- 6.5 V at 16-A TLP (I/O Pin to GND)
- RDYN: 0.1 Ω (I/O Pin to GND)
- Industrial Temperature Range: –40°C to +125°C
- Industry Standard 0402 Package (DFN1006P2)
The ESD351 is a uni-directional TVS ESD protection diode featuring low dynamic resistance RDYN and low clamping voltage. The ESD351 is rated to dissipate ESD strikes up to 30 kV (Contact and Air) level per the IEC 61000-4-2 standard. The ultra-low dynamic resistance (0.1 Ω) and extremely low clamping voltage (6.5 V at 16-A TLP) ensure system level protection against transient events. This device has a capacitance of 1.8 pF (typical) making it ideal for protecting interfaces such as USB 2.0.
The ESD351 is offered in the industry standard 0402 (DPY/DFN1006P2) package.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | ESD351 1-Channel 30 kV ESD Protection Diode with Low Clamping Voltage in 0402 Package datasheet | PDF | HTML | 2018年 3月 13日 |
| Application brief | ESD Protection for GPIO | PDF | HTML | 2024年 1月 8日 | |
| Application note | ESD Packaging and Layout Guide (Rev. B) | PDF | HTML | 2022年 8月 18日 | |
| White paper | Demystifying surge protection | 2018年 11月 6日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
ESDEVM — ESD 評估模組
靜電敏感裝置 (ESD) 評估模組 (EVM) 是我們大多數 ESD 產品組合的開發平台。此電路板配備所有傳統 ESD 元件封裝，可測試任意數量的裝置。裝置可以焊接到其相應的元件封裝上，然後進行測試。對於一般高速 ESD 二極體，會實作阻抗控制的配置以取得 S 參數並取消內嵌電路板軌跡。對於非高速 ESD 二極體，其元件封裝會包含連接至測試點的軌跡，讓您輕鬆執行 DC 測試，例如崩潰電壓、保持電壓、洩漏等。電路板配置也可以透過將訊號針腳短路到訊號所在的任何地方，讓任何裝置針腳都能輕鬆地連接到電源 (VCC) 或接地。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
參考設計
TIDA-010002 — 以數位溫度感測器取代白金 RTD 感測器參考設計
This reference design for the differential temperature measurement (DTM) subsystem of heat and cooling meters provides a fully digital alternative to thin-film platinum Resistance Temperature Detector (RTD) sensors. The Precision Temperature Sensor (PTS) achieves Class A RTD sensor accuracy from (...)
參考設計
PMP40496 — 具有 5V USB 的 2 芯升壓充電系統參考設計
This 5-V USB, 2-cell battery boost charger reference design includes a charger system and a 2-cell battery holder with a gauge that can be connected by a cable or work independently. The key components of the charger system include the BQ25883 boost charger, TUSB320LAI Type-C CC logic, (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| X1SON (DPY) | 2 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。