首頁 隔離 隔離式介面 IC 隔離式數位輸入
首頁
隔離
隔離式介面 IC
隔離式數位輸入
最新

ISO1228

現行

具有電流限制和 LED 指示的八通道隔離 24-V 至 36-V 數位輸入接收器

立即訂購
產品規格表

ISO1228

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Isolation rating Basic Number of channels 8 Forward/reverse channels 8/0 Data rate (max) (Mbps) 1.5 Working isolation voltage (VIOWM) (Vrms) 450 Surge isolation voltage (VIOSM) (VPK) 5000 Transient isolation voltage (VIOTM) (VPK) 4242 Withstand isolation voltage (VISO) (Vrms) 3000 CMTI (min) (kV/µs) 50 Operating temperature range (°C) -40 to 125 Supply voltage (max) (V) 36 Supply voltage (min) (V) 1.71 Propagation delay time (typ) (µs) 0.78
Rating Catalog Isolation rating Basic Number of channels 8 Forward/reverse channels 8/0 Data rate (max) (Mbps) 1.5 Working isolation voltage (VIOWM) (Vrms) 450 Surge isolation voltage (VIOSM) (VPK) 5000 Transient isolation voltage (VIOTM) (VPK) 4242 Withstand isolation voltage (VISO) (Vrms) 3000 CMTI (min) (kV/µs) 50 Operating temperature range (°C) -40 to 125 Supply voltage (max) (V) 36 Supply voltage (min) (V) 1.71 Propagation delay time (typ) (µs) 0.78
SSOP (DFB) 38 59.4 mm² 9.9 x 6
  • Configurable IEC 61131-2 eight Type 1/3 or four Type 2 Isolated Digital Inputs
  • Low Power and Heat Dissipation
    • Selectable input current limit
    • Fieldside LED drivers using input current
  • Configurable sinking or sourcing type inputs
  • Wire-break detection in sink mode
  • Integrated field-side power loss detection
  • Programmable Glitch Filters
  • Built in CRC check across barrier
  • Serial SPI and Parallel output options
    • Supports SPI daisy chaining
    • Supports SPI burst mode
  • Integrated IEC ESD and Surge Protection
  • High CMTI(Typ): 75kV/µs
  • VCC1 Logic supply voltage range: 1.71V to 5.5V
  • AVCC field supply voltage range (sink mode): 8.5V to 36V
  • AVCC field supply voltage range (source mode): 13V to 36V
  • Ambient temperature range: –40°C to 125°C
  • Small Footprint 38-SSOP Package
  • Safety-related certifications:
    • 4242-VPK VIOTM and 637-VPK VIORM per DIN EN IEC 60747-17 (VDE 0884-17)
    • 3000-VRMS Isolation for 1 Minute per UL 1577
    • IEC 62368-1, IEC 61010-1 Certifications
    • All Certifications Planned
  • Configurable IEC 61131-2 eight Type 1/3 or four Type 2 Isolated Digital Inputs
  • Low Power and Heat Dissipation
    • Selectable input current limit
    • Fieldside LED drivers using input current
  • Configurable sinking or sourcing type inputs
  • Wire-break detection in sink mode
  • Integrated field-side power loss detection
  • Programmable Glitch Filters
  • Built in CRC check across barrier
  • Serial SPI and Parallel output options
    • Supports SPI daisy chaining
    • Supports SPI burst mode
  • Integrated IEC ESD and Surge Protection
  • High CMTI(Typ): 75kV/µs
  • VCC1 Logic supply voltage range: 1.71V to 5.5V
  • AVCC field supply voltage range (sink mode): 8.5V to 36V
  • AVCC field supply voltage range (source mode): 13V to 36V
  • Ambient temperature range: –40°C to 125°C
  • Small Footprint 38-SSOP Package
  • Safety-related certifications:
    • 4242-VPK VIOTM and 637-VPK VIORM per DIN EN IEC 60747-17 (VDE 0884-17)
    • 3000-VRMS Isolation for 1 Minute per UL 1577
    • IEC 62368-1, IEC 61010-1 Certifications
    • All Certifications Planned

The ISO1228 is an eight-channel isolated 24V digital input receiver, configurable to IEC 61131-2 Type 1, and 3 characteristics or four-channel Type 2 characteristics. The ISO1228 includes resistor-programmable accurate current limit and field side input-current-powered LED indication to reduce system power dissipation and reduce board temperatures. ISO1228 can be configured for either sourcing or sinking type digital inputs with minimal hardware change. Both serial SPI and parallel output modes are available. Wire-break detection, fieldside supply monitoring and built-in CRC across barriers help improve system reliability. In-built glitch filters and integrated IEC-ESD and surge protection help to achieve a robust design.

The ISO1228 operates over the logic supply range of 1.71V to 5.5V, supporting 1.8V, 2.5-V, 3.3V, and 5V controllers. Field side output voltage range supported is 8.5V to 36V in sink mode and 13V to 36V in source mode.ISO1228 supports up to 1.5Mbps data rates passing a minimum pulse width of 667ns for high-speed operation.

The ISO1228 is an eight-channel isolated 24V digital input receiver, configurable to IEC 61131-2 Type 1, and 3 characteristics or four-channel Type 2 characteristics. The ISO1228 includes resistor-programmable accurate current limit and field side input-current-powered LED indication to reduce system power dissipation and reduce board temperatures. ISO1228 can be configured for either sourcing or sinking type digital inputs with minimal hardware change. Both serial SPI and parallel output modes are available. Wire-break detection, fieldside supply monitoring and built-in CRC across barriers help improve system reliability. In-built glitch filters and integrated IEC-ESD and surge protection help to achieve a robust design.

The ISO1228 operates over the logic supply range of 1.71V to 5.5V, supporting 1.8V, 2.5-V, 3.3V, and 5V controllers. Field side output voltage range supported is 8.5V to 36V in sink mode and 13V to 36V in source mode.ISO1228 supports up to 1.5Mbps data rates passing a minimum pulse width of 667ns for high-speed operation.

filter 尋找其它 隔離式數位輸入
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet ISO1228 Eight-Channel Isolated Digital Input with Current Limit and Diagnostics datasheet (Rev. A) PDF | HTML 2024年 1月 9日
Application brief How To Simplify Isolated 24V PLC Digital Input Module Designs (Rev. C) PDF | HTML 2024年 11月 22日
Application brief Space-Saving Design Techniques for Multichannel High-Voltage Digital Input Modules (Rev. C) PDF | HTML 2024年 11月 11日
EVM User's guide ISO228 Eight-Channel Isolated Digital Input Sink/Source Evaluation Module User's Guide PDF | HTML 2024年 9月 10日
Application brief Digital Input Module, Digital Output Module PDF | HTML 2024年 3月 6日
EVM User's guide ISO1228, ISO1228DFBEVM Eight-Channel Isolated Digital Input with Current Limit PDF | HTML 2023年 7月 6日
Certificate ISO1228DFBEVM EU RoHS Declaration of Conformity (DoC) 2023年 4月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ISO1228DFBEVM — 適用於汲極模式下 8 通道隔離數位輸入的 ISO1228 評估模組

ISO1228DFBEVM 是採用 38 接腳 DFB SSOP 封裝，用於評估 8 通道隔離式數位輸入接收器 ISO1228 的評估模組 (EVM)。EVM 提供額外體積，讓使用者能夠靈活新增元件，以測試各種常見應用。EVM 具備多個測試點和跨接器選項，可對配備最少外部元件的裝置進行評估。

使用指南: PDF | HTML
TI.com 無法提供
開發板

ISO1228EVM — 適用於汲極/源極模式下 8 通道隔離式數位輸入的 ISO1228 評估模組

ISO1228EVM 是採用 38 接腳 DFB SSOP 封裝，且為汲極/源極模式配置的八通道隔離式數位輸入接收器 ISO1228 的評估模組 (EVM)。EVM 提供額外體積，讓使用者能夠靈活新增元件，以測試各種常見應用。EVM 具備多個測試點和跨接器選項，可對配備最少外部元件的裝置進行評估。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

ISO1228 IBIS Model

SLLM506.ZIP (86 KB) - IBIS Model
下載
計算工具

ISO1228-CALC — ISO1228 sink source threshold calculator

ISO1228 calculator for calculating voltage thresholds and resistor values for IEC 61131-2 standard
支援產品和硬體

支援產品和硬體

產品
隔離式數位輸入
ISO1228 — 具有電流限制和 LED 指示的八通道隔離 24-V 至 36-V 數位輸入接收器
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SSOP (DFB) 38 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片