ISO7310C
- Signaling Rate: 25 Mbps
- Integrated Noise Filter at the Input
- Default Output ‘High’ and ‘Low’ Options
- Low Power Consumption: Typical ICC
- 1.9 mA at 1 Mbps, 3.8 mA at 25 Mbps (5V
Supplies) - 1.4 mA at 1 Mbps, 2.6 mA at 25 Mbps (3.3V
Supplies)
- 1.9 mA at 1 Mbps, 3.8 mA at 25 Mbps (5V
- Low Propagation Delay: 32 ns Typical (5V
Supplies) - 3.3 V and 5 V Level Translation
- Wide TA Range Specified: –40°C to 125°C
- 65 KV/µs Transient Immunity, Typical (5V
Supplies) - Robust Electromagnetic Compatibility (EMC)
- System-level ESD, EFT, and Surge Immunity
- Low Emissions
- Isolation Barrier Life: > 25 Years
- Operates from 3.3 V and 5 V Supplies
- Narrow Body SOIC-8 Package
- Safety and Regulatory Approvals:
- 4242 VPK Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1 - 3000 VRMS Isolation for 1 minute per UL 1577
- CSA Component Acceptance Notice 5A,
IEC 60950-1 and IEC 61010-1 End Equipment
Standards - CQC Certification per GB4943.1-2011
- 4242 VPK Isolation per DIN V VDE V 0884-10
ISO7310x provide galvanic isolation up to 3000 VRMS for 1 minute per UL and 4242 VPK per VDE. These devices have one isolated channel comprised of a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. Used in conjunction with isolated power supplies, ISO7310x prevent noise currents on a data bus or other circuit from entering the local ground and interfering with or damaging sensitive circuitry. These devices have integrated noise filters for harsh industrial environment where short noise pulses may be present at the device input pins. ISO7310x have TTL input thresholds and operate from 3 V to 5.5 V supply levels. Through innovative chip design and layout techniques, electromagnetic compatibility of ISO7310x has been significantly enhanced to enable system-level ESD, EFT, Surge and Emissions compliance.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | ISO7310x Robust EMC, Low Power, Single Channel Digital Isolator datasheet (Rev. D) | PDF | HTML | 2015年 4月 27日 |
Certificate | VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. W) | 2024年 1月 31日 | ||
Application note | Digital Isolator Design Guide (Rev. G) | PDF | HTML | 2023年 9月 13日 | |
White paper | Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. C) | PDF | HTML | 2023年 9月 7日 | |
Certificate | CSA Certificate for ISO73xxD | 2023年 2月 22日 | ||
Certificate | CQC Certificate for ISOxxD (Rev. A) | 2023年 2月 7日 | ||
Certificate | UL Certificate of Compliance File E181974 Vol 4 Sec 6 (Rev. P) | 2022年 8月 5日 | ||
White paper | Why are Digital Isolators Certified to Meet Electrical Equipment Standards? | 2021年 11月 16日 | ||
White paper | Distance Through Insulation: How Digital Isolators Meet Certification Requiremen | PDF | HTML | 2021年 6月 11日 | |
EVM User's guide | Universal Digital Isolator Evaluation Module | PDF | HTML | 2021年 3月 4日 | |
Application note | Isolation Glossary (Rev. A) | 2017年 9月 19日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DIGI-ISO-EVM — 通用數位隔離器評估模組
DIGI-ISO-EVM 是一款評估模組 (EVM),可評估任何 TI 單通道、雙通道、三通道、四通道或六通道數位隔離器裝置,並提供五種不同封裝 - 8 接腳窄體 SOIC (D)、8 接腳寬體 SOIC (DWV)、16 接腳寬體 SOIC (DWW)、16 接腳超寬體 SOIC (DWW) 和 16 接腳 (DBQ) 封裝。EVM 具備足夠 Berg 接腳選項,可用於評估具最少外部零組件的裝置。
ISO7310C-EVM — 單通道數位隔離器評估模組
The ISO7310C-EVM evaluation module (EVM) helps you evaluate device performance, supporting the fast development and analysis of isolated systems. This EVM board supports evaluation of any of our single-channel or dual-channel digital isolators in an 8-pin SOIC package.
The ISO7310C digital isolator (...)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOIC (D) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。