首頁 電源管理 電壓參考 分流電壓參考

LM385-ADJ

現行

可調式 70°C 微功耗電壓參考

產品詳細資料

VO (V) 1.24 Initial accuracy (max) (%) 1, 2 VO adj (min) (V) 1.24 VO adj (max) (V) 5.3 Iz for regulation (min) (µA) 10 Reference voltage (V) adjustable Rating Catalog Temp coeff (max) (ppm/°C) 150 Operating temperature range (°C) 0 to 70 Iout/Iz (max) (mA) 20
VO (V) 1.24 Initial accuracy (max) (%) 1, 2 VO adj (min) (V) 1.24 VO adj (max) (V) 5.3 Iz for regulation (min) (µA) 10 Reference voltage (V) adjustable Rating Catalog Temp coeff (max) (ppm/°C) 150 Operating temperature range (°C) 0 to 70 Iout/Iz (max) (mA) 20
SOIC (D) 8 29.4 mm² 4.9 x 6 TO-92 (LP) 3 19.136 mm² 5.2 x 3.68
  • Adjustable from 1.24V to 5.30V
  • Operating Current of 10μA to 20mA
  • 1% and 2% Initial Tolerance
  • 1Ω Dynamic Impedance
  • Low Temperature Coefficient

All trademarks are the property of their respective owners.

  • Adjustable from 1.24V to 5.30V
  • Operating Current of 10μA to 20mA
  • 1% and 2% Initial Tolerance
  • 1Ω Dynamic Impedance
  • Low Temperature Coefficient

All trademarks are the property of their respective owners.

The LM185/LM285/LM385 are micropower 3-terminal adjustable band-gap voltage reference diodes. Operating from 1.24 to 5.3V and over a 10μA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-gap reference uses only transistors and resistors, low noise and good long-term stability result.

Careful design of the LM185 has made the device tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation.

The extremely low power drain of the LM185 makes it useful for micropower circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part.

The LM185 is rated for operation over a −55°C to 125°C temperature range, while the LM285 is rated −40°C to 85°C and the LM385 0°C to 70°C. The LM185 is available in a hermetic TO package and a LCCC package, while the LM285/LM385 are available in a low-cost TO-92 package, as well as SOIC.

The LM185/LM285/LM385 are micropower 3-terminal adjustable band-gap voltage reference diodes. Operating from 1.24 to 5.3V and over a 10μA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-gap reference uses only transistors and resistors, low noise and good long-term stability result.

Careful design of the LM185 has made the device tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation.

The extremely low power drain of the LM185 makes it useful for micropower circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part.

The LM185 is rated for operation over a −55°C to 125°C temperature range, while the LM285 is rated −40°C to 85°C and the LM385 0°C to 70°C. The LM185 is available in a hermetic TO package and a LCCC package, while the LM285/LM385 are available in a low-cost TO-92 package, as well as SOIC.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
LM185-ADJ 現行 可調整微電源電壓參考 Extended temperature range (-55°C to 125°C)
LM285-ADJ 現行 可調式 85°C 微功耗電壓參考 Extended temperature range (-40°C to 85°C)
功能相同,但引腳輸出與所比較的裝置不同
TLV431 現行 1.5% 準確度、低電壓、可調整精密度分流穩壓器 Lower temperature drift (138 ppm/°C) with adjustable voltage options

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet LM185/LM285/LM385 Adjustable Micropower Voltage References datasheet (Rev. F) 2013年 4月 5日
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 2019年 6月 28日
Application note AN-715 LM385 Feedback Provides Regulator Isolation (Rev. A) 2013年 5月 6日
Application note AN-777 LM2577 Three Output, Isolated Flyback Regulator (Rev. B) 2013年 4月 23日
Application note AN-284 Single-Supply Applications of CMOS MICRODACs (Rev. B) 2013年 4月 22日
Application note TO-92 Packing Options / Ordering Instructions (Rev. A) 2010年 6月 23日
Application note Negative Buck Switching Regulator (using LM258x) 2007年 3月 21日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

SHUNT_VOLTAGE_REFERENCE_RESISTOR_CALCULATOR Shunt Voltage Reference External Resistor Quick Start Calculator

This external resistor quick-start calculator tool lets you easily calculate valid external resistor values relative to voltage reference, supply and load-current bounds. With these inputs, you can instantly view the resulting calculations and use the color-coded indications to understand (...)

支援產品和硬體

支援產品和硬體

產品
晶粒與晶圓服務
LM336-2.5-MIL 分流電壓參考
分流電壓參考
ATL431 2.5-V 低 IQ 可調整精密分流穩壓器 LM136-2.5-N 電壓參考二極體 LM136-5.0 5.0 V 參考二極體 LM136-5.0QML 5.0 V 參考二極體 LM136A-2.5QML 2.5V 參考二極體 LM136A-2.5QML-SP 抗輻射 QMLV、2.5-V 分流電壓參考 LM136A-5.0QML 5.0 V 參考二極體 LM185-1.2-N 微功耗電壓參考二極體 LM185-1.2QML 微功耗電壓參考二極體 LM185-1.2QML-SP 抗輻射 QMLV、1.2-V 分流電壓參考 LM185-2.5-N 微功耗電壓參考二極體 LM185-2.5QML 微功耗電壓參考二極體 LM185-2.5QML-SP 航太級 QMLV 2.5-V 分流電壓參考 LM185-ADJ 可調整微電源電壓參考 LM185QML 可調整微電源電壓參考 LM285-1.2 1.235-V、–40°C 至 +85°C、微功率電壓參考 LM285-1.2-N 1.235-V、–40°C 至 +85°C 微功耗電壓參考二極體 LM285-2.5 2.5-V、–40°C 至 +85°C、微功率電壓參考 LM285-2.5-N 2.5-V、–40°C 至 +85°C 微功耗電壓參考二極體 LM285-ADJ 可調式 85°C 微功耗電壓參考 LM336-2.5 0°C 至 70°C、2.5-V 整合式參考電路 LM336-2.5-N 電壓參考二極體 LM336-5.0 5-V 參考二極體 LM385-1.2 1.235-V、2%、0°C 至 70°C 微功率電壓參考 LM385-1.2-MIL 微功耗電壓參考 LM385-1.2-N 1.235-V、0°C 至 70°C 微功耗電壓參考二極體 LM385-2.5 2.5-V、2%、70°C、微功率電壓參考 LM385-2.5-N 2.5-V、0°C 至 70°C 微功耗電壓參考二極體 LM385-ADJ 可調式 70°C 微功耗電壓參考 LM4030 超高精確分流電壓參考 LM4040 固定電壓、45-µA 精密微功率分流電壓參考 LM4040-N 100-ppm/°C 精密微功率分流電壓參考 LM4040-N-Q1 車用 100-ppm/°C 精密微功率分流電壓參考 LM4041-N 固定式與可調式 45-µA 精密微功率分流電壓參考 LM4041-N-Q1 車用精密微功率分流電壓參考 LM4050-N 50-ppm/°C 精密微功率分流電壓參考 LM4050-N-Q1 車用 50-ppm/°C 精密微功率分流電壓參考 LM4050QML-SP 抗輻射 QMLV、2.5-V 或 5-V 分流電壓參考 LM4051-N 固定式與可調式精密微功率分流電壓參考 LM431 2%、1% 或 0.5% 準確度,可調整精密齊納分流穩壓器 LM4431 微功耗分流電壓參考 LMV431 1.5% 低電壓 (1.24-V) 可調式精密分流穩壓器 LMV431A 1% 低電壓 (1.24-V) 可調式精密分流穩壓器 LMV431B 0.5% 低電壓 (1.24-V) 可調節式精密分流穩壓器
電流參考
LM134 3 端子可調節電流源 LM234 100°C 3 接腳可調整電流源 LM334 0°C 至 70°C 3 接腳可調整電流源
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
TO-92 (LP) 3 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片