計算工具
SN6501-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C4B
- Functional Safety-Capable
- Push-Pull Driver for Small Transformers
- Single 3.3-V or 5-V Supply
- High Primary-side Current Drive:
- 5-V Supply: 350 mA (Max)
- 3.3-V Supply: 150 mA (Max)
- Low Ripple on Rectified Output Permits Small Output Capacitors
- Small 5-Pin SOT-23 Package
The SN6501-Q1 is a monolithic oscillator/power-driver, specifically designed for small form factor, isolated power supplies in isolated interface applications. The device drives a low-profile, center-tapped transformer primary from a 3.3-V or 5-V DC power supply. The secondary can be wound to provide any isolated voltage based on transformer turns ratio.
The SN6501-Q1 consists of an oscillator followed by a gate drive circuit that provides the complementary output signals to drive the ground referenced N-channel power switches. The internal logic ensures break-before-make action between the two switches.
The SN6501-Q1 is available in a small SOT-23 (5) package, and is specified for operation at temperatures from –40°C to 125°C.
您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的裝置不同
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
SN6501-MULXFMR-EVM — 適用於隔離式電源的 SN6501 變壓器驅動器評估模組
The SN6501-Multi-Xfmr EVM is configured with five independent circuits providing options to operate using either a +3.3Vdc or +5.0Vdc input and provides isolated 3.3Vdc or 5.0Vdc outputs. Two of the circuits include LDO's to regulate the output. The five configurations include 3Vdc-to-3Vdc with no (...)
使用指南: PDF
開發板
SN6507DGQEVM — 適用於低放射、500-mA 推挽式隔離電源供應器的 SN6507 評估模組
SN6507DGQEVM 允許使用者在隔離電源供應器應用中評估 SN6507 推挽式隔離變壓器驅動器的性能和功能。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
參考設計
PMP22650 — GaN 式 6.6-kW 雙向車載充電器參考設計
PMP22650 參考設計為 6.6-kW 雙向車載充電器。此設計採用雙相圖騰柱 PFC 與具同步整流的全橋 CLLLC 轉換器。CLLLC 利用頻率和相位調變來調節所需調節範圍內的輸出。此設計在 TMS320F28388D 微控制器中使用單一處理核心，以控制 PFC 和 CLLLC 二者。同步整流可透過與 Rogowski 線圈電流感測器相同的微控制器實作。透過使用高速 GaN 開關 (LMG3522) 可實現高密度。PFC 以 120 kHz 運作，CLLLC 則以 200 kHz 至 800 kHz 的可變頻率運作。開放訊框功率密度 3.8 kW/L 實現 96.5% (...)
參考設計
TIDM-02009 — 經 ASIL D 安全概念評估的高速牽引、雙向 DC/DC 轉換參考設計
此參考設計展現如何以單一 TMS320F28388D 即時 C2000™ MCU 控制 HEV/EV 牽引變流器和雙向 DC-DC 轉換器。牽引控制運用軟體式解析器轉數位轉換器 (RDC) 將馬達驅動至高達 20,000 RPM 的高速。DC-DC 轉換器則採用尖峰電流模式控制 (PCMC) 技術，以及全橋相移式轉換器 (PSFB) 拓撲與同步整流 (SR) 機制。牽引變流器級使用由 UCC5870-Q1 智慧閘極驅動器驅動的碳化矽 (SiC) 功率級。PCMC 波形是使用最先進的 PWM 模組和比較器子系統 (CMPSS)中的內建傾斜補償產生。ASIL (...)
參考設計
TIDA-01605 — 具有二級關閉保護功能的車用雙通道 SiC MOSFET 閘極驅動器參考設計
This reference design is an automotive qualified isolated gate driver solution for driving Silicon Carbide (SiC) MOSFETs in half bridge configuration. The design includes two push pull bias supplies for the dual channel isolated gate driver respectively and each supply provides +15V and -4V output (...)
參考設計
TIDA-01513 — 車用高電壓與隔離洩漏測量參考設計
The function of this reference design is to monitor the isolation resistance of a high-voltage bus to the chassis ground. Monitoring the isolation strength of coupling devices and components from high voltage to the chassis ground is a necessary feature in HEV’s and EV’s as battery (...)
參考設計
TIDA-020018 — 汽車分流架構隔離式電流感測器參考設計，適合 DC/DC 與 OBC 應用
This reference design demonstrates high-side primary current sensing in DC/DC converter and onboard charger (OBC) applications for hybrid and electric vehicles. Using an isolated shunt approach for current sensing has several advantages, including high accuracy, linearity and robustness. However, (...)
參考設計
TIDA-01543 — 具有過電流偵測且適用於牽引逆變器的隔離式電流感測參考設計 (±300 A)
This reference design provides detection of traction motor phase currents. TIDA-01543 realizes an isolated current sensor. Precise in-line huntbased, motor phase current sensing is done with AMC1305M05-Q1 delta-sigma (ΔΣ) modulators and the INA301-Q1 device. The high CMTI of the (...)
參考設計
TIDA-01255 — 車用強化型絕緣 CAN 參考設計
This reference design is built for isolated CAN communication, which is widely used in automotive environments. In hybrid and electric vehicles (HEV/EVs), a high-voltage network is floating with respect to the chassis ground. Isolation is required for the power and communication channels (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。